These are the same lines that I used in 12.04. The red screenshot is Ubuntu 12.04 and the same code works fine in it.
Printable View
I don't doubt that at all, but you did not include the lines below
that produced the output for these images:Code:TEXT
http://i39.tinypic.com/4sxllc.png http://i39.tinypic.com/2wcfign.png
I want to try the lines you use.
Mine are:
And maybe "everything" below TEXT --- unless that oversized N in the image is from a wallpaper. :DCode:TEXT
other conky commands here
Network ${color7}${hr}${color}
Dn${goto 40}${downspeedgraph eth0 14,130 0000ff fff000 5 -lt}${alignr 5}${color5}${downspeedf eth0}${color}
Up${goto 40}${upspeedgraph eth0 14,130 fff000 0000ff 5 -lt}${alignr 5}${color5}${upspeedf eth0}${color}
more conky commands here
@Sector11
Thanks for the response. Some of the exact matches in His config wouldn't be useful such as the 8 core CPU monitor. Thanks for all of the info, I'll reach out to robgraves for more info. Ill re-post with a finished product :).
@ gixxer675
If you can't contact him, come back and well see what we can do. Check out the "Setting Up Conky" links in my sig as well. :D
@gixxer675
Here's one similar you could build on.
Code:# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Use Xft?
use_xft yes
xftfont Droid Sans:size=8
xftalpha 0.8
text_buffer_size 2048
background no
# Update interval in seconds
update_interval 1
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 182 0
maximum_width 182
# Draw shades?
draw_shades no
default_color D6D6D6 #4D4D4D
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 3
# border width
border_width 1
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 25
gap_y 40
# Set default bar size
default_bar_size 8 60
TEXT
SYSTEM ${hr 2}
${goto 6}${voffset 6}${font OpenLogos:size=22}u${font}${goto 36}${voffset -18}${pre_exec cat /etc/issue.net} $machine
${goto 36}Kernel: ${kernel}
${goto 36}Conky: ${conky_version}
${hr 2}
#CPU
${goto 6}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU1: ${cpu cpu0}% ${alignr}${cpubar cpu0 8,60}
${goto 6}${voffset 4}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU2: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
#${goto 6}${voffset 4}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU3: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,60}
#${goto 6}${voffset 4}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU4: ${cpu cpu3}% ${alignr}${cpubar cpu3 8,60}
#
#RAM
${goto 6}${voffset 4}${font StyleBats:size=16}g${font}${voffset -4}${goto 32}RAM: ${mem} ${alignr}${membar 8,60}
#
#Disk
${goto 6}${voffset 4}${font StyleBats:size=16}x${font}${voffset -4}${goto 32}DISK: ${diskio}${alignr}${diskiograph 8,60 F57900 FCAF3E}
#
#Swap
${goto 6}${voffset 4}${font StyleBats:size=16}j${font}${voffset -4}${goto 32}SWAP: $swapperc% ${alignr}${swapbar 8,60}
#
#Battery
#${goto 6}${voffset 4}${font StyleBats:size=16}8${font}${voffset -4}${goto 32}BATT: ${exec acpi | awk '{print $4}' | tr -d '[=,=]'}${alignr}${execibar 30 acpi | awk '{print $4}' | tr -d '[=,=]'}
#
#CPU1 Temp
${goto 6}${voffset 4}${font Devil inside:size=16}1${font}${voffset -4}${goto 32}CPU Temp: ${alignr}${exec sensors it8720-isa-0228 | grep temp1 | awk '{print $2}' | cut -c2-3}°C
#
#CPU2 Temp
#${goto 6}${voffset 4}${font Devil inside:size=16}1${font}${voffset -4}${goto 32}CPU2 Temp: ${alignr}${exec sensors | grep 'Core 1' | awk '{print $3}' | cut -c2-3}°C
#
#Motherboard Temp
#${goto 5}${voffset 4}${font Devil inside:size=16}x${font}${voffset -4}${goto 32}Mother Temp: ${alignr}${exec sensors | grep 'MB Temperature' | cut -c19-20}°C / ${color #FCAF3E}${exec sensors | grep 'MB Temperature' | cut -c37-38}°C$color
#
#HD Temp
${goto 4.5}${voffset 2}${font ConkySymbols:size=13}k${font}${voffset -4}${goto 32}HD Temp:${alignr}${exec hddtemp /dev/sdb -n}°C
#
#Fan Speed
#${goto 6}${font Martin Vogel's Symbols:size=16}j${font}${voffset -4}${goto 32}Fan Speed: ${alignr}${exec sensors | grep 'RPM'| cut -c16-25}
#
#Uptime
${goto 6}${voffset 4}${font StyleBats:size=16}q${font}${voffset -4}${goto 32}Uptime: ${alignr}${uptime}
#
#Processes Running
${goto 6}${voffset 4}${font StyleBats:size=16}k${font}${voffset -4}${goto 32}Processes: ${alignr}$processes ($running_processes running)
#
#Top 4 Processes
${goto 7.5}${voffset 4}${font Poky:size=15}a${font}${goto 32}${voffset -10}Highest: ${alignr 13}CPU${alignr}RAM
${goto 32}${voffset -5.5}${hr 1}
${voffset -1}${goto 32}${top name 1} ${goto 124}${top cpu 1}${alignr }${top mem 1}
${voffset -1}${goto 32}${top name 2} ${goto 124}${top cpu 2}${alignr }${top mem 2}
${voffset -1}${goto 32}${top name 3} ${goto 124}${top cpu 3}${alignr }${top mem 3}
${voffset -1}${goto 32}${top name 4} ${goto 124}${top cpu 4}${alignr }${top mem 4}
${voffset -1}DATE ${hr 2}
${alignc 35}${font LCDMono Bold:size=26}${time %l:%M }${font}
${alignc}${time %A %d %B}
${voffset -1}HD ${hr 2}
${goto 3}${voffset 4}${font Poky:size=16}H${font}${goto 29}${voffset -11} Root: ${fs_used_perc /}%${alignr}${fs_size /}
${goto 29} Free: ${fs_free /}${alignr}${fs_bar 8,60 /}
#${goto 3}${voffset 8}${font Poky:size=16}H${font}${goto 29}${voffset -11} Home: ${fs_used_perc /home}%${alignr}${fs_size /home}
#${goto 29} Free: ${fs_free /home}${alignr}${fs_bar 8,60 /home}
${voffset -1}NETWORK ${hr 2}
${if_up wlan0}
${font Poky:size=14}Y${font}${goto 32}${voffset -8}SSID: ${wireless_essid wlan0}
${goto 32}Signal: ${wireless_link_qual wlan0}% ${alignr}${wireless_link_bar 8,60 wlan0}
${voffset 4}${font VariShapes Solid:size=14}q${font}${goto 32}${voffset -6}Up: ${upspeed wlan0}${font} ${alignr}${upspeedgraph wlan0 8,60 F57900 FCAF3E}
${goto 32}Total: ${totalup wlan0}
${voffset 4}${font VariShapes Solid:size=14}Q${font}${goto 32}${voffset -6}Down: ${downspeed wlan0}${font} ${alignr}${downspeedgraph wlan0 8,60 F57900 FCAF3E}
${goto 32}Total: ${totaldown wlan0}
${voffset 4}${font Poky:size=13}w${font}${goto 32}${voffset -8}Local IP: ${alignr}${addr wlan0}
${goto 32}Public IP: ${alignr}${execi 3600 curl ifconfig.me}
# |--ETH0
${else}${if_up eth0}
${voffset -13}${font VariShapes Solid:size=14}q${font}${goto 32}${voffset -6}Up: ${upspeed eth0}${font} ${alignr}${upspeedgraph eth0 8,60 F57900 FCAF3E}
${goto 32}Total: ${totalup eth0}
${voffset -2}${font VariShapes Solid:size=14}Q${font}${goto 32}${voffset -6}Down: ${downspeed eth0}${font} ${alignr}${downspeedgraph eth0 8,60 F57900 FCAF3E}
${goto 32}Total: ${totaldown eth0}
${voffset -2}${font Poky:size=13}w${font}${goto 32}${voffset -4}Local IP: ${alignr}${addr eth0}
${goto 32}Public IP: ${alignr}${execi 3600 curl ifconfig.me}
# |--PPP0
${endif}${else}${if_up ppp0}
${voffset -13}${font VariShapes Solid:size=14}q${font}${goto 32}${voffset -6}Up: ${upspeed ppp0}${font} ${alignr}${upspeedgraph ppp0 8,60 F57900 FCAF3E}
${goto 32}Total: ${totalup ppp0}
${voffset -2}${font VariShapes Solid:size=14}Q${font}${goto 32}${voffset -6}Down: ${downspeed ppp0}${font} ${alignr}${downspeedgraph ppp0 8,60 F57900 FCAF3E}
${goto 32}Total: ${totaldown ppp0}
${voffset -2}${font Poky:size=13}w${font}${goto 32}${voffset -4}Local IP: ${alignr}${addr ppp0}
${endif}${else}${voffset 4}${font PizzaDude Bullets:size=12}4${font}${goto 32}Network Unavailable${endif}${endif}
${hr 2}
@Sector11:
Sounds great! Thanks for the assistance!
@stinkeye:
That is a very appealing design and just about what I'm looking for. Are any additional font packs needed that you know? (I'll give it a shot when I get home!)
Edit: I just needed to read, looks like "xftfont" . I would take the guess that "devil inside" font is a style for the aforementioned "xftfont" pack?
↑ You the man stinkeye! Well done.
Sure. Here is my entire conkyrc:
Code:# Create own window instead of using desktop (required in nautilus)
own_window_class Conky
own_window yes
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_argb_visual yes
# own_window_argb_value 00000000
# own_window_colour 000000
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# fiddle with window
use_spacer none
use_xft yes
# Update interval in seconds
update_interval 1.0
# Minimum size of text area
minimum_size 345 620
maximum_width 345
# text_buffer_size 8096
# max_user_text 90000
# Draw shades?
draw_shades no
# Text stuff
draw_outline no # amplifies text if yes
draw_borders no
xftfont Droid Sans Mono:size=9
uppercase no # set to yes if you want all text to be in uppercase
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 0
# border width
border_width 0
# Default colors and also border colors, grey90 == #e5e5e5
default_color white
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x 10
gap_y 30
# stuff after ‘TEXT’ will be formatted on screen
TEXT
${color grey}GENERAL ${hr 2}$color
Host: $nodename ${execpi 45 /home/saad/Code/pt.py}
${voffset -60}Kernel: $kernel
Uptime: $uptime
Conky $conky_version
${color green}Pakistan$color | ${color red}USA$color
${time %a, %d %b} | ${tztime UTC+4 %a, %d %b}${execpi 3600 /home/saad/Code/holidays.py}
${time %r} | ${tztime UTC+4 %r}
${color grey}CPU ${hr 2}$color
Name: ${execi 1500 cat /proc/cpuinfo | grep 'model name' | awk 'NR > 1 { exit }; 1' | sed -e 's/model name.*: //'}
Avg Usage: ${if_match ${cpu cpu0} >= 90}${color red}${cpu cpu0}%${color}${endif}${if_match ${cpu cpu0} < 90}${cpu cpu0}%${endif} | \
Active Processes: $running_processes | \
Temp: ${if_match ${hwmon temp 1} <= 59}${color green}${hwmon temp 1}C${color}${endif}${if_match ${hwmon temp 1} >= 60}${if_match ${hwmon temp 1} <=70}${color yellow}${hwmon temp 1}C${color}${endif}${endif}${if_match ${hwmon temp 1} >= 71}${if_match ${hwmon temp 1} <=89}${color F57900}${hwmon temp 1}C${color}${endif}${endif}${if_match ${hwmon temp 1} >= 90}${color red}${hwmon temp 1}C${color}${endif}
Core1: ${if_match ${cpu cpu1} < 50}${cpu cpu1}%${endif}${if_match ${cpu cpu1} >= 50}${if_match ${cpu cpu1} < 90}${color yellow}${cpu cpu1}%${color}${endif}${endif}${if_match ${cpu cpu1} >= 90}${color red}${cpu cpu1}%${color}${endif} | \
Core2: ${if_match ${cpu cpu2} < 50}${cpu cpu2}%${endif}${if_match ${cpu cpu2} >= 50}${if_match ${cpu cpu2} < 90}${color yellow}${cpu cpu2}%${color}${endif}${endif}${if_match ${cpu cpu2} >= 90}${color red}${cpu cpu2}%${color}${endif} | \
Core3: ${if_match ${cpu cpu3} < 50}${cpu cpu3}%${endif}${if_match ${cpu cpu3} >= 50}${if_match ${cpu cpu3} < 90}${color yellow}${cpu cpu3}%${color}${endif}${endif}${if_match ${cpu cpu3} >= 90}${color red}${cpu cpu3}%${color}${endif} | \
Core4: ${if_match ${cpu cpu4} < 50}${cpu cpu4}%${endif}${if_match ${cpu cpu4} >= 50}${if_match ${cpu cpu4} < 90}${color yellow}${cpu cpu4}%${color}${endif}${endif}${if_match ${cpu cpu4} >= 90}${color red}${cpu cpu4}%${color}${endif}
Core5: ${if_match ${cpu cpu5} < 50}${cpu cpu5}%${endif}${if_match ${cpu cpu5} >= 50}${if_match ${cpu cpu5} < 90}${color yellow}${cpu cpu5}%${color}${endif}${endif}${if_match ${cpu cpu5} >= 90}${color red}${cpu cpu5}%${color}${endif} | \
Core6: ${if_match ${cpu cpu6} < 50}${cpu cpu6}%${endif}${if_match ${cpu cpu6} >= 50}${if_match ${cpu cpu6} < 90}${color yellow}${cpu cpu6}%${color}${endif}${endif}${if_match ${cpu cpu6} >= 90}${color red}${cpu cpu6}%${color}${endif} | \
Core7: ${if_match ${cpu cpu7} < 50}${cpu cpu7}%${endif}${if_match ${cpu cpu7} >= 50}${if_match ${cpu cpu7} < 90}${color yellow}${cpu cpu7}%${color}${endif}${endif}${if_match ${cpu cpu7} >= 90}${color red}${cpu cpu7}%${color}${endif} | \
Core8: ${if_match ${cpu cpu8} < 50}${cpu cpu8}%${endif}${if_match ${cpu cpu8} >= 50}${if_match ${cpu cpu8} < 90}${color yellow}${cpu cpu8}%${color}${endif}${endif}${if_match ${cpu cpu8} >= 90}${color red}${cpu cpu8}%${color}${endif}
#${cpugraph cpu0 000000 ffffff}
${color grey}BATTERY:$color ${if_match ${battery_percent BAT0} <= 9}${color red}${battery_percent BAT0}%${color} ${battery_bar BAT0}${endif}${if_match ${battery_percent BAT0} >= 10}${if_match ${battery_percent BAT0} <=49}${color F57900}${battery_percent BAT0}%${color} ${battery_bar BAT0}${endif}${endif}${if_match ${battery_percent BAT0} >= 50}${if_match ${battery_percent BAT0} <=79}${color yellow}${battery_percent BAT0}%${color} ${battery_bar BAT0}${endif}${endif}${if_match ${battery_percent BAT0} >= 80}${if_match ${battery_percent BAT0} <=99}${color green}${battery_percent BAT0}%${color} ${battery_bar BAT0}${endif}${endif}${if_match ${battery_percent BAT0} >= 100}${battery_percent BAT0}%$font ${battery_bar BAT0}${endif}
${execi 10 /home/saad/Code/batt.sh}
${execpi 60 /home/saad/Code/batt_log.py}
${color grey}SYSTEM MONITOR ${hr 2}$color
NAME PID CPU MEM
${top name 1} ${top pid 1} ${top cpu 1}% ${top mem 1}%
${top name 2} ${top pid 2} ${top cpu 2}% ${top mem 2}%
${top name 3} ${top pid 3} ${top cpu 3}% ${top mem 3}%
${color grey}MEMORY / DISK (Temp: ${execi 60 hddtemp /dev/sda | tail -c 6}) ${hr 2}$color
RAM: $mem/$memmax ${membar 6}$color
Root: ${fs_free /}/${fs_size /} ${fs_bar 6 /}
OS: ${fs_free /media/OS}/${fs_size /media/OS} ${fs_bar 6 /media/OS}
${if_mounted /media/MULTIBOOT}MULTIBOOT: ${fs_free /media/MULTIBOOT}/${fs_size /media/MULTIBOOT} ${fs_bar 6 /media/MULTIBOOT}${endif}
${if_mounted /media/SAAD}SAAD: ${fs_free /media/SAAD}/${fs_size /media/SAAD} ${fs_bar 6 /media/SAAD}${endif}
${if_existing /proc/net/route wlan0}${color grey}NETWORK ($color${color green}${wireless_essid wlan0}$color${color grey}) ${hr 2}$color
Down: $color${downspeed wlan0} /s ${alignr}Up: ${upspeed wlan0} /s
${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0
25,140 000000 00ff00}$color
Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0}
Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768
61000 count}${alignr}${wireless_ap wlan0}
Public IP: ${execi 60 /home/saad/Code/conkyIp}${alignr}${execi 15 /home/saad/Code/wireless_thoroughput.sh}
Local IP: ${addr wlan0}${alignr}${execpi 1800 vnstat -i wlan0 -m | grep "`date +"%b '%y"`" | awk '{print $1, $3 $4}'}
Signal: ${wireless_link_qual_perc wlan0}%\
${alignr}${if_up wlan0}${exec nm-tool | grep DNS | awk -vORS=, '{print $2}' | sed 's/,$//'}$endif
${else}${if_existing /proc/net/route eth0}${color grey}NETWORK$color (${color #40E0D0}Ethernet$color) ${color grey}${hr 2}$color
Down: $color${downspeed eth0} /s ${alignr}Up: ${upspeed eth0} /s
${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0
25,140 000000 00ff00}$color
Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0}
Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768
61000 count}${alignr}Total: ${tcp_portmon 1 65535 count}
Public IP: ${execi 60 /home/saad/Code/conkyIp}${alignr}${execi 15 /home/saad/Code/eth_thoroughput.sh}
Local IP: ${addr eth0}${alignr}${execpi 1800 vnstat -i eth0 -m | grep "`date +"%b '%y"`" | awk '{print $1, $3 $4}'}
DNS: ${if_up eth0}${exec nm-tool | grep DNS | awk -vORS=, '{print $2}' | sed 's/,$//'}$endif\
${alignr}${execi 99999 cat /sys/class/net/eth0/address}${endif}
@ sbjaved
I know Sector11 (Hi) is looking at your config but as I am using the same desktop,
I'll let you know your config displays fine here.
Code:glen@Raring:~$ conky --version
Conky 1.9.0