fatmonk
November 21st, 2008, 07:23 AM
This is the remote I have:
http://www.antec.com/images/400/RM200_400.jpg
I have an Antec Fusion black case and have set up the LCD and the built in IR receiver as per these instructions:
http://ubuntuforums.org/showthread.php?t=779674
When I use mode2 I can see codes for all numbers, up, down, left and right movement of the direction pad, and all of the buttons directly around the direction pad.
If I press any other button on the control mode2 stops responding to all button presses until I do an lirc restart.
The same happens with irw.
If I run irrecord I can programme codes fo rthe same buttons, but when it comes to any of the others irrecord times out waiting for input.
I also have a remote that came with my Hauppage WinTV Nove-T 500 and that doesn't produce any response from mode2, irw or irrecord. I don't really want to use this one anyway, so thats no problem. But I also don;t want to use the wired plug in IR receiver that came with that card (the point of spending more on the Antec case with the internal receiver was that I wouldn't have an external IR receiver!)
All the above is using /dev/lirc0
ls /dev/lirc* reveals the following:
/dev/lirc0
/dev/lirc2
/dev/lircd
/dev/lircd1
I'm at a loss as to what to try next to be honest.
Please, someone, give me some clues here. Does anyone have that remote working under Mythbuntu / Ubuntu?
Antec's page that describes the remote is here (http://www.antec.com/uk/productDetails.php?ProdID=75223#), but that doesn't look like the exact same model of receiver/LCD I have, the LCD screen is different.
-FM
http://www.antec.com/images/400/RM200_400.jpg
I have an Antec Fusion black case and have set up the LCD and the built in IR receiver as per these instructions:
http://ubuntuforums.org/showthread.php?t=779674
When I use mode2 I can see codes for all numbers, up, down, left and right movement of the direction pad, and all of the buttons directly around the direction pad.
If I press any other button on the control mode2 stops responding to all button presses until I do an lirc restart.
The same happens with irw.
If I run irrecord I can programme codes fo rthe same buttons, but when it comes to any of the others irrecord times out waiting for input.
I also have a remote that came with my Hauppage WinTV Nove-T 500 and that doesn't produce any response from mode2, irw or irrecord. I don't really want to use this one anyway, so thats no problem. But I also don;t want to use the wired plug in IR receiver that came with that card (the point of spending more on the Antec case with the internal receiver was that I wouldn't have an external IR receiver!)
All the above is using /dev/lirc0
ls /dev/lirc* reveals the following:
/dev/lirc0
/dev/lirc2
/dev/lircd
/dev/lircd1
I'm at a loss as to what to try next to be honest.
Please, someone, give me some clues here. Does anyone have that remote working under Mythbuntu / Ubuntu?
Antec's page that describes the remote is here (http://www.antec.com/uk/productDetails.php?ProdID=75223#), but that doesn't look like the exact same model of receiver/LCD I have, the LCD screen is different.
-FM