[SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

[User21]

Como puedo obtener el sonido 5.1 en Hardy Heron? Tengo una motherboard Asus M2N-VM DVI con chipset nForce 630a. He googleado, pero o no he comprendido qué hacer, o simplemente no funciona. No sé como manejar lo de ALSA ni de lo de PulseAudio. Ya me quedé sin ideas...

Les emito la siguiente info y cualquier otro dato, me lo piden:

lspci
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
01:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
02:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)


lsmod
Module Size Used by
binfmt_misc 12808 1
tun 12672 0
vboxdrv 76736 0
powernow_k8 16704 1
cpufreq_ondemand 9740 1
cpufreq_conservative 8712 0
cpufreq_userspace 5284 0
cpufreq_stats 7104 0
freq_table 5536 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 2688 0
video 19856 0
output 4736 1 video
container 5632 0
dock 11280 0
sbs 15112 0
sbshc 7680 1 sbs
battery 14212 0
xt_TCPMSS 5504 1
xt_limit 3584 8
xt_tcpudp 4096 30
nf_nat_irc 3712 0
nf_nat_ftp 4352 0
ipt_LOG 7296 8
ipt_MASQUERADE 4608 1
ipt_TOS 3200 0
ipt_REJECT 5632 1
nf_conntrack_irc 7576 1 nf_nat_irc
nf_conntrack_ftp 10144 1 nf_nat_ftp
xt_state 3328 8
ac 6916 0
it87 20876 0
hwmon_vid 4352 1 it87
lp 12324 0
af_packet 23812 2
ipv6 267780 22
bt878 11832 0
tuner 42912 0
tea5767 6788 1 tuner
tda8290 12420 1 tuner
tuner_simple 10248 1 tuner
mt20xx 13192 1 tuner
tea5761 6020 1 tuner
serio_raw 7940 0
bttv 175860 1 bt878
parport_pc 36260 1
ir_common 36100 1 bttv
parport 37832 2 lp,parport_pc
psmouse 40336 0
pcspkr 4224 0
evdev 13056 3
compat_ioctl32 2304 1 bttv
i2c_algo_bit 7300 1 bttv
nvidia 6896812 30
k8temp 6656 0
gspca 643920 0
videobuf_dma_sg 14980 1 bttv
videobuf_core 18820 2 bttv,videobuf_dma_sg
btcx_risc 5896 1 bttv
tveeprom 16656 1 bttv
i2c_core 24832 10 tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761, bttv,i2c_algo_bit,nvidia,tveeprom
agpgart 34760 1 nvidia
videodev 29440 2 bttv,gspca
v4l2_common 18304 3 tuner,bttv,videodev
wmi_acer 9644 0
v4l1_compat 15492 2 bttv,videodev
snd_hda_intel 344856 3
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
snd_seq_dummy 4868 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
button 9232 0
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 56996 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_ seq,snd_timer,snd_seq_device
shpchp 34452 0
pci_hotplug 30880 1 shpchp
soundcore 8800 1 snd
iptable_nat 8324 1
nf_nat 20396 4 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 19080 10 iptable_nat
nf_conntrack 66752 9 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,nf_conntrack_ irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,n f_conntrack_ipv4
iptable_mangle 3712 0
iptable_filter 3840 1
ip_tables 14820 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 16132 10 xt_TCPMSS,xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERAD E,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_table s
ext3 136840 3
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 7
usb_storage 73664 0
libusual 19108 1 usb_storage
ahci 28548 6
ata_generic 8324 0
pata_amd 14212 0
floppy 59588 0
pata_acpi 8320 0
libata 159344 4 ahci,ata_generic,pata_amd,pata_acpi
tulip 53536 0
forcedeth 51980 0
scsi_mod 151436 5 sg,sr_mod,sd_mod,usb_storage,libata
ehci_hcd 37900 0
ohci_hcd 26640 0
usbcore 146412 6 gspca,usb_storage,libusual,ehci_hcd,ohci_hcd
thermal 16796 0
processor 37384 2 powernow_k8,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 7


Como debo proceder para obtener el sonido 5.1 ? En ween, me funciona desde el arranque, todo OK, con los drivers, pero agradecería poder solucionarlo en Ubuntu!
No, no estoy testeando con un mp3 de 2 canales, ni con un archivo de video con audio MP3.
Algun gurú del sonido en GNU/Linux y/o Ubuntu ? Desde ya, muchisimas gracias :)

[User21]

Aparentemente, obtuve el sonido de 6 canales.
No estoy muy seguro como lo hice, pero explico lo que hice! xD

Mi tarjeta de sonido es, segun lspci : nVidia Corporation MCP67 High Definition Audio
Pero se identifica en la info de la motherboard como Realtek ALC662 High Definition Audio 6-Channel CODEC con soporte S/PDIF y detección de JACKs.

Me basé en este tutorial (http://joeb454.ubuntuforums.org/showthread.php?p=5144481) y en este otro (http://ubuntuforums.org/showpost.php?p=5131958&postcount=2). Este último parece haber dado la solución. Lo traduzco al español por si alguien lo necesita.

Identifica tu codec:
aplay -l
cat /proc/asound/card0/codec#* | grep CodecYo obtuve las siguientes salidas.
**** Lista de PLAYBACK Dispositivos Hardware ****
tarjeta 0: NVidia [HDA NVidia], dispositivo 0: ALC662 Analog [ALC662 Analog]
Subdispositivos: 0/1
Subdispositivo #0: subdevice #0
tarjeta 0: NVidia [HDA NVidia], dispositivo 1: ALC662 Digital [ALC662 Digital]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0

Codec: Realtek ALC662 rev1Ahora, edita /etc/modprobe.d/alsa-base con el siguiente comando:
gksudo gedit /etc/modprobe.d/alsa-base Modifica (o agrega) la siguiente linea con el modelname = apropiado, de la lista que se muestra debajo.
options snd-hda-intel model=modelname
Lista de modelnames según tu CODEC:

Module snd-hda-intel
--------------------

Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
ATI SB450, SB600, RS600,
VIA VT8251/VT8237A,
SIS966, ULI M5461

[Multiple options for each card instance]
model - force the model name
position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
bdl_pos_adj - Specifies the DMA IRQ timing delay in samples.
Passing -1 will make the driver to choose the appropriate
value based on the controller chip.

[Single (global) options]
single_cmd - Use single immediate commands to communicate with
codecs (for debugging only)
enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
power_save - Automatic power-saving timtout (in second, 0 =
disable)
power_save_controller - Reset HD-audio controller in power-saving mode
(default = on)

This module supports multiple cards and autoprobe.

Each codec may have a model table for different configurations.
If your machine isn't listed there, the default (usually minimal)
configuration is set up. You can pass "model=<name>" option to
specify a certain model in such a case. There are different
models depending on the codec chip.

Model name Description
---------- -----------
ALC880
3stack 3-jack in back and a headphone out
3stack-digout 3-jack in back, a HP out and a SPDIF out
5stack 5-jack in back, 2-jack in front
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
6stack 6-jack in back, 2-jack in front
6stack-digout 6-jack with a SPDIF out
w810 3-jack
z71v 3-jack (HP shared SPDIF)
asus 3-jack (ASUS Mobo)
asus-w1v ASUS W1V
asus-dig ASUS with SPDIF out
asus-dig2 ASUS with SPDIF out (using GPIO2)
uniwill 3-jack
fujitsu Fujitsu Laptops (Pi1536)
F1734 2-jack
lg LG laptop (m1 express dual)
lg-lw LG LW20/LW25 laptop
tcl TCL S700
clevo Clevo laptops (m520G, m665n)
medion Medion Rim 2150
test for testing/debugging purpose, almost all controls can be
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
auto auto-config reading BIOS (default)

ALC260
hp HP machines
hp-3013 HP machines (3013-variant)
fujitsu Fujitsu S7020
acer Acer TravelMate
will Will laptops (PB V7900)
replacer Replacer 672V
basic fixed pin assignment (old default model)
test for testing/debugging purpose, almost all controls can
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
auto auto-config reading BIOS (default)

ALC262
fujitsu Fujitsu Laptop
hp-bpc HP xw4400/6400/8400/9400 laptops
hp-bpc-d7000 HP BPC D7000
hp-tc-t5735 HP Thin Client T5735
hp-rp5700 HP RP5700
benq Benq ED8
benq-t31 Benq T31
hippo Hippo (ATI) with jack detection, Sony UX-90s
hippo_1 Hippo (Benq) with jack detection
sony-assamd Sony ASSAMD
ultra Samsung Q1 Ultra Vista model
lenovo-3000 Lenovo 3000 y410
basic fixed pin assignment w/o SPDIF
auto auto-config reading BIOS (default)

ALC267/268
quanta-il1 Quanta IL1 mini-notebook
3stack 3-stack model
toshiba Toshiba A205
acer Acer laptops
dell Dell OEM laptops (Vostro 1200)
zepto Zepto laptops
test for testing/debugging purpose, almost all controls can
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
auto auto-config reading BIOS (default)

ALC269
basic Basic preset

ALC662/663
3stack-dig 3-stack (2-channel) with SPDIF
3stack-6ch 3-stack (6-channel)
3stack-6ch-dig 3-stack (6-channel) with SPDIF
6stack-dig 6-stack with SPDIF
lenovo-101e Lenovo laptop
eeepc-p701 ASUS Eeepc P701
eeepc-ep20 ASUS Eeepc EP20
m51va ASUS M51VA
g71v ASUS G71V
h13 ASUS H13
g50v ASUS G50V
auto auto-config reading BIOS (default)

ALC882/885
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
targa Targa T8, MSI-1049 T8
asus-a7j ASUS A7J
asus-a7m ASUS A7M
macpro MacPro support
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
w2jc ASUS W2JC
auto auto-config reading BIOS (default)

ALC883/888
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
3stack-6ch 3-jack 6-channel
3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
6stack-dig-demo 6-jack digital for Intel demo board
acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
acer-aspire Acer Aspire 9810
medion Medion Laptops
medion-md2 Medion MD2
targa-dig Targa/MSI
targa-2ch-dig Targs/MSI with 2-channel
laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
lenovo-101e Lenovo 101E
lenovo-nb0763 Lenovo NB0763
lenovo-ms7195-dig Lenovo MS7195
haier-w66 Haier W66
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
auto auto-config reading BIOS (default)

ALC861/660
3stack 3-jack
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack with SPDIF I/O
3stack-660 3-jack (for ALC660)
uniwill-m31 Uniwill M31 laptop
toshiba Toshiba laptop support
asus Asus laptop support
asus-laptop ASUS F2/F3 laptops
auto auto-config reading BIOS (default)

ALC861VD/660VD
3stack 3-jack
3stack-dig 3-jack with SPDIF OUT
6stack-dig 6-jack with SPDIF OUT
3stack-660 3-jack (for ALC660VD)
3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
lenovo Lenovo 3000 C200 & ASUS X20SG, ASUS U1E
dallas Dallas laptops, Toshiba satellite L30-106
hp HP TX1000
auto auto-config reading BIOS (default)

CMI9880
minimal 3-jack in back
min_fp 3-jack in back, 2-jack in front
full 6-jack in back, 2-jack in front
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)

AD1882
3stack 3-stack mode (default)
6stack 6-stack mode

AD1884A / AD1883 / AD1984A / AD1984B
desktop 3-stack desktop (default)
laptop laptop with HP jack sensing
mobile mobile devices with HP jack sensing
thinkpad Lenovo Thinkpad X300

AD1884
N/A

AD1981
basic 3-jack (default)
hp HP nx6320
thinkpad Lenovo Thinkpad T60/X60/Z60
toshiba Toshiba U205

AD1983
N/A

AD1984
basic default configuration
thinkpad Lenovo Thinkpad T61/X61
dell Dell T3400

AD1986A
6stack 6-jack, separate surrounds (default)
3stack 3-stack, shared surrounds
laptop 2-channel only (FSC V2060, Samsung M50)
laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J)
laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
ultra 2-channel with EAPD (Samsung Ultra tablet PC)

AD1988/AD1988B/AD1989A/AD1989B
6stack 6-jack
6stack-dig ditto with SPDIF
3stack 3-jack
3stack-dig ditto with SPDIF
laptop 3-jack with hp-jack automute
laptop-dig ditto with SPDIF
auto auto-config reading BIOS (default)

Conexant 5045
laptop-hpsense Laptop with HP sense (old model laptop)
laptop-micsense Laptop with Mic sense (old model fujitsu)
laptop-hpmicsense Laptop with HP and Mic senses
benq Benq R55E
test for testing/debugging purpose, almost all controls
can be adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y

Conexant 5047
laptop Basic Laptop config
laptop-hp Laptop config for some HP models (subdevice 30A5)
laptop-eapd Laptop config with EAPD support
test for testing/debugging purpose, almost all controls
can be adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y

Conexant 5051
laptop Basic Laptop config (default)
hp HP Spartan laptop

STAC9200
ref Reference board
dell-d21 Dell (unknown)
dell-d22 Dell (unknown)
dell-d23 Dell (unknown)
dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
dell-m22 Dell Latitude D620, Dell Latitude D820
dell-m23 Dell XPS M1710, Dell Precision M90
dell-m24 Dell Latitude 120L
dell-m25 Dell Inspiron E1505n
dell-m26 Dell Inspiron 1501
dell-m27 Dell Inspiron E1705/9400
gateway Gateway laptops with EAPD control
panasonic Panasonic CF-74

STAC9205/9254
ref Reference board
dell-m42 Dell (unknown)
dell-m43 Dell Precision
dell-m44 Dell Inspiron

STAC9220/9221
ref Reference board
3stack D945 3stack
5stack D945 5stack + SPDIF
intel-mac-v1 Intel Mac Type 1
intel-mac-v2 Intel Mac Type 2
intel-mac-v3 Intel Mac Type 3
intel-mac-v4 Intel Mac Type 4
intel-mac-v5 Intel Mac Type 5
macmini Intel Mac Mini (equivalent with type 3)
macbook Intel Mac Book (eq. type 5)
macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
imac-intel Intel iMac (eq. type 2)
imac-intel-20 Intel iMac (newer version) (eq. type 3)
dell-d81 Dell (unknown)
dell-d82 Dell (unknown)
dell-m81 Dell (unknown)
dell-m82 Dell XPS M1210

STAC9202/9250/9251
ref Reference board, base config
m2-2 Some Gateway MX series laptops
m6 Some Gateway NX series laptops
pa6 Gateway NX860 series

STAC9227/9228/9229/927x
ref Reference board
3stack D965 3stack
5stack D965 5stack + SPDIF
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup

STAC92HD71B*
ref Reference board
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops

STAC92HD73*
ref Reference board
dell-m6 Dell desktops

STAC9872
vaio Setup for VAIO FE550G/SZ110
vaio-ar Setup for VAIO AR

The model name "genric" is treated as a special case. When this
model is given, the driver uses the generic codec parser without
"codec-patch". It's sometimes good for testing and debugging.

If the default configuration doesn't work and one of the above
matches with your device, report it together with the PCI
subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
ML (see the section "Links and Addresses").

power_save and power_save_controller options are for power-saving
mode. See powersave.txt for details.

Note 2: If you get click noises on output, try the module option
position_fix=1 or 2. position_fix=1 will use the SD_LPIB
register value without FIFO size correction as the current
DMA pointer. position_fix=2 will make the driver to use
the position buffer instead of reading SD_LPIB register.
(Usually SD_LPLIB register is more accurate than the
position buffer.)

NB: If you get many "azx_get_response timeout" messages at
loading, it's likely a problem of interrupts (e.g. ACPI irq
routing). Try to boot with options like "pci=noacpi". Also, you
can try "single_cmd=1" module option. This will switch the
communication method between HDA controller and codecs to the
single immediate commands instead of CORB/RIRB. Basically, the
single command mode is provided only for BIOS, and you won't get
unsolicited events, too. But, at least, this works independently
from the irq. Remember this is a last resort, and should be
avoided as much as possible...

MORE NOTES ON "azx_get_response timeout" PROBLEMS:
On some hardwares, you may need to add a proper probe_mask option
to avoid the "azx_get_response timeout" problem above, instead.
This occurs when the access to non-existing or non-working codec slot
(likely a modem one) causes a stall of the communication via HD-audio
bus. You can see which codec slots are probed by enabling
CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec
proc files. Then limit the slots to probe by probe_mask option.
For example, probe_mask=1 means to probe only the first slot, and
probe_mask=4 means only the third slot.

The power-management is supported.En mi caso particular, mi codec es ALC662 , por lo cual, según el tipo, elegi el modelname "3stack-6ch-dig" :

options snd-hda-intel model=3stack-6ch-dig
Reiniciar Ubuntu (seguramente no es necesario si se sabe reiniciar todos los servidores de sonido, los modulos implicados, y los procesos necesarios, pero como no lo se, simplemente reinicio)

Al reiniciar, al hacer doble clic en el CONTROL DE VOLUME de Gnome, tengo las opciones para activar los 6 canales. Mis películas codificadas en AC3 y DVDs comerciales, ya funcionan con sonido 5.1!!! :D

Para testear que todos los canales estén funcionando, desde terminal:
speaker-test -Dplug:surround51 -c6 -l1 -twavY a disfrutar..!

[niko_3100]

que compu tenes capo?

[User21]

Es un AMD Athlon 64 X2 4600+; Motherboard ASUS M2N-VM DVI chipset Nforce 630a; 2Gb RAM DDR2 800Mhz; Video Nvidia GT 8500GT 512 Mb RAM DDR2 y un gabinete "PICHINCHO". Por?

[albertoguevara]

Hey, muy útil tu post, tenía el mismo problema pero mi configuración es 4.0 y sirve el sonido perfecto en las cornetas traseras con la configuración de 6ch pero deja de funcionar la entrada del mic, y por consecuencia no tengo micrófono; me imagino que esto ocurre debido a que toma el jack del mic para las cornetas del medio (o que se yo). No sabes si existe una configuración de 4ch?

Saludos, Alberto Guevara

[Yunow]

Desde que tengo Ubuntu 8.10 me quedé sin sonido...

Probando el tutorial no puedo pasar de la primer linea


yunow@yunowPC:~$ aplay -l
aplay: device_list:215: no se encontraron tarjetas de sonido...



lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)


No puedo cargar ningún módulo, parecen no existir...


sudo modprobe snd-hda-intel
sudo: unable to resolve host yunowPC
FATAL: Module snd_hda_intel not found.


Sabes que puede ser???

[Max_Aeternus]

Hola gente antes que nada muchas gracias ^^ , entre al foro por q tenia un drama con mi placa de sonido (no se escuchaba nada xD) bueno este tuto me ayudo y esta completamente solucionado ^^

Tengo Ubuntu 8.10 un mother ASUS P5GD2-X, Chipset de sonido CMI 9880 (para este chipset no existen mas soporte ni drivers en al pagina oficial, me fue mas facil instalarlo con Ubuntu q con Vista XD)

Gracias!!!.

[daikun]

error abajo si esta lo q queria decir

[daikun]

Sabes tengo exactamente la misma tarjeta que tu, me sale la misma. y logro hacer estos pasos, modificando el alsa-base.conf o algo asi, lo pongo en la ultima linea

options snd-hda-intel model=3stack-6ch-dig y no sucede nada, pero ahora buscando mas posibilidades y probando aca y haya. desconfigure Alsa por que no me sale ninguna posibilidad de hardware, nada de nada

Por cierto estoy usando 9.10 y me encantaria poder usar mi tarjeta con todas sus funcionalidades ah!

Alguien sabe si las tarjetas Genius 5.1 "basicas" son compatibles con Alsa?

Gracias

[guillermolisi]

Sabes tengo exactamente la misma tarjeta que tu, me sale la misma. y logro hacer estos pasos, modificando el alsa-base.conf o algo asi, lo pongo en la ultima linea

options snd-hda-intel model=3stack-6ch-dig y no sucede nada, pero ahora buscando mas posibilidades y probando aca y haya. desconfigure Alsa por que no me sale ninguna posibilidad de hardware, nada de nada

Por cierto estoy usando 9.10 y me encantaria poder usar mi tarjeta con todas sus funcionalidades ah!

Alguien sabe si las tarjetas Genius 5.1 "basicas" son compatibles con Alsa?

Gracias
No se si te detuviste para leer el asunto de este thread pero lo que aqui se converso es sobre otra version mas antigua de Ubuntu: Hardy Heron 8.04

Esta solucion es especifica para esta version, no para la que estas usando porque hay cosas que han cambiado y mucho.

En todo caso, hay threads que hablan del problema con los sonidos en 9.10 en la seccion de software.