PDA

View Full Version : [ubuntu] usb reset after upgrade to 8.10



rolandbreedveld
October 31st, 2008, 07:58 PM
After upgrade to Ubuntu 8.10 I'm not possible to burn DVD's on my external USB 2.0 device
Hardware: Lenovo T61 with Lite-On USB 2.0 DVD-burner
kernel: 2.6.27-7-generic
when burning a DVD with (example) :
wodim -v dev=/dev/sr2 DVD.iso
get the error:
Track 01: 4 of 4322 MB written (fifo 100%) 3.8x.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 08 1D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 1.455s timeout 40s
write track data: error after 4253696 bytes
wodim: A write error occured.

in syslog/messages:
kernel: [ 7614.344164] usb 7-2: reset high speed USB device using ehci_hcd and address 4
kernel: [ 7622.040061] usb 7-2: reset high speed USB device using ehci_hcd and address 4
kernel: [ 7624.368121] usb 7-2: reset high speed USB device using ehci_hcd and address 4

tried a lot of stuff, like fill all autosuspend's in /sys with "-1"
and other things I googled, nothing helped
In Ubuntu 8.04 I didn't have these problems, strange while it seems an "old" problem.

hope someone will have a solution for this :( problem.

regards, Roland

Fenestras morituri erant, liber origo causidicus te salutant.

TheCompWIz
November 14th, 2008, 09:00 PM
I'm running into the exact same problem... something new with 8.10 :( in addition, randomly, alsa locks up randomly... I wonder if there's a problem with the forcedeth driver in 8.10.

*edit* ... just noticed tho... mine is ohci... and it's a low-speed device...

[ 1210.221821] usb 1-3: reset low speed USB device using ohci_hcd and address 3

in this case... it's my mouse.... which really sucks when it causes the usb stack to die.

batistuta
November 25th, 2008, 10:30 PM
I'm having same issue with a Lenovo T61 and with my external hard drive. Have also tried changing max_sectors to no avail.

Have also tried with a different distro (system rescueCD using 2.6.25-r4) and even with a pcmcia USB adaptor. Same issue, USB hardware reset.

However, this problem doesn't happen in Windows. It seems to be a Linux problem. Will try with an older kernel to see if it makes a difference.

ronniet
December 31st, 2008, 02:47 AM
Same here, I get:

reset high speed USB device using ehci_hcd

when I'm trying to transfer songs to my iPod Classic :(

bsmith1051
December 31st, 2008, 05:45 PM
usb 1-3: reset low speed USB device using ohci_hcd and address 3
it's my mouse.... which really sucks when it causes the usb stack to die.
Are you saying that everything works properly if you unplug the mouse?