Hauppuage WinTV HVR1110 (not hvr-1100 owners) owners please read!

[db260179]

My patch has been accepted into the linux-dvb list

http://linuxtv.org/hg/v4l-dvb/rev/40d58d92d183bfe13ab7834434ea438a4fb20813

If you are a owner of this card and have found the following not working:-

1.When plugging in a 3.5 stereo lead in the LINE IN socket, and selecting S-video or Composite to record from, no sound will be heard, even after a 'sox redirect'.

2.Tuning the Analog TV will produce no results.

3.Radio feature - no radio stations and sound.

Just on a side note, i'm doing a patch for the Avermedia Super 007 remote support. (I have a working patch, if any avermedia owners wish to test it!)

:guitar:

[sandman652001]

How do I use your pach?
Thanks for the help

[db260179]

Install the latest v4l-dvb, this overwrite your current kernel drivers.

http://www.linuxtv.org

How do I use your pach?
Thanks for the help

[iborg1013]

For first time I can tune and listen FM radio with my HVR-1110 in Ubuntu Intrepid after compile the new drivers.

THANK YOU VERY MUNCH !!!!

[db260179]

My pleasure,

This was bugging me so much! so i decided to fix it myself.

Glad i could help?

For first time I can tune and listen FM radio with my HVR-1110 in Ubuntu Intrepid after compile the new drivers.

THANK YOU VERY MUNCH !!!!

[sauron_jr]

Sorry, i'm a bit new to installing thing in linux, how and what i have to install from the site you spoke.

Thank you a lot

[iborg1013]

Sorry, i'm a bit new to installing thing in linux, how and what i have to install from the site you spoke.

Thank you a lot

Try this:

sudo apt-get install mercurial linux-headers-$(uname -r) build-essential dvb-utils
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make
sudo make install

and reboot

[iborg1013]

After install the new drivers (or with the kernel ones) I cant make the remote work.

$ cat /proc/bus/input/devices

I: Bus=0018 Vendor=0000 Product=0000 Version=0000
N: Name="HVR 1110"
P: Phys=i2c-0/0-0071/ir0
S: Sysfs=/devices/virtual/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=100003
B: KEY=100fc312 214a80200000000 0 18000 41a800004801 9e168000000000 10000ffc


Then I've install lirc

$ sudo apt-get install lirc
$ cat /etc/lirc/hardware.conf

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Linux input layer (/dev/input/eventX)"
REMOTE_MODULES=""
REMOTE_DRIVER="devinput"
REMOTE_DEVICE="/dev/input/event5"
REMOTE_LIRCD_CONF="generic/devinput.conf"
REMOTE_LIRCD_ARGS=""

but when I try irrecord

sudo irrecord -H dev/input -d /dev/input/event5 hvr1110.conf

I press a button but i only got the error

irrecord: gap not found, can't continue
irrecord: closing '/dev/input/event5'

[megamania]

1.When plugging in a 3.5 stereo lead in the LINE IN socket, and selecting S-video or Composite to record from, no sound will be heard, even after a 'sox redirect'.
2.Tuning the Analog TV will produce no results.
3.Radio feature - no radio stations and sound.


Thank you! You helped me solve my major complaint about the Hauppauge HVR 1110, the "no audio with composite" problem.

However, I still have no audio when trying to listen to the radio with mplayer (mplayer radio://100.0). Is there something else I need to do in order to get it to work?

[iborg1013]

However, I still have no audio when trying to listen to the radio with mplayer (mplayer radio://100.0). Is there something else I need to do in order to get it to work?

Radio works for me using gnomeradio after redirect analog sound with sox

sox -c 1 -t alsa hw:1,0 -t alsa default


What about IR remote? Can you make it work?

[megamania]

Radio works for me using gnomeradio after redirect analog sound with sox
Thanks - fixed! It works now (I had messed up sound redirection).


What about IR remote? Can you make it work?
I have never tried it, sorry. I'll give it a try one of these days.

And do you know how to record analog tv easily. I tried a few scripts using mencoder, but I come up with no sound. I'm looking for a simple program allowing me to use timeshift with both analog and digital tv...

[alexef]

Just on a side note, i'm doing a patch for the Avermedia Super 007 remote support. (I have a working patch, if any avermedia owners wish to test it!)


Hi, I have a Super 007 card, can you please give me the patch so I can test it?

Thanks

[db260179]

You need to modify this for the ubuntu intrepid kernel. Just a case of modifying the lines to fit the intrepid kernel source code

Some mapped keys dont work as they should, only a couple though.

Hi, I have a Super 007 card, can you please give me the patch so I can test it?

Thanks

[zoutmax]

Radio works for me using gnomeradio after redirect analog sound with sox

sox -c 1 -t alsa hw:1,0 -t alsa default


What about IR remote? Can you make it work?

Hi,

I got the sound with sox too but too much latency,
I am posting here because desperate to make working my :

Hauppauge WinTV-HVR1110 DVB-T/Hybrid

From lspci output :

Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)

I am running Ubuntu 9.0.4 jaunty:

Ubuntu 9.0.4 Linux 2.6.28-11-generic

I tried with the build in drivers from the Ubuntu 9.0.4 install disk,
and with the drivers that i compiled from Linux TV org (V4L-DVB).

Both give me the same result : No TV or radio tuner sound output

The sound is working fine on this system only this TV card does not produce any...

I checked the volume parameters tried with different sound servers (alsa, oss, etc..) no results.

I assume that the sound card i am using is OK, details from lspci :

Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)

Working on the TV card tested with TV Time and K Radio :

Video (the video output is ok, i can watch TV on the different channels)
Video Channel Seeking (the card detect all my TV channels but no sound)
Radio Channel Seeking (the card detect all my Radio channels but no sound)
Remote Control Lirc (Infrared remote control plugged in the TV card working fine)

The only problem is that i can't get any sound output from this TV card, i checked the modules :

lsmod
Module Size Used by
binfmt_misc 16776 1
radeon 342816 2
drm 96296 3 radeon
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
ivtv 150436 0
i2c_algo_bit 14084 1 ivtv
cx2341x 22020 1 ivtv
lirc_dev 19892 0
input_polldev 11912 0
video 25360 0
output 11008 1 video
lp 17156 0
tda1004x 24068 1
saa7134_dvb 30476 0
videobuf_dvb 15108 1 saa7134_dvb
dvb_core 93312 1 videobuf_dvb
saa7134_alsa 20000 0
ir_kbd_i2c 16272 0
tda827x 18052 2
ppdev 15620 0
snd_intel8x0 37532 3
snd_ac97_codec 112292 1 snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 82948 4 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_o ss
tda8290 21000 1
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
tuner 30984 1
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
saa7134 160716 2 saa7134_dvb,saa7134_alsa
ir_common 56068 2 ir_kbd_i2c,saa7134
v4l2_common 23808 4 ivtv,cx2341x,tuner,saa7134
snd 62628 17
saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_o ss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,s nd_seq,snd_timer,snd_seq_
device
videodev 44832 4 ivtv,tuner,saa7134,v4l2_common
v4l1_compat 21764 1 videodev
iTCO_wdt 19108 0
iTCO_vendor_support 11652 1 iTCO_wdt
psmouse 61972 0
videobuf_dma_sg 20484 3 saa7134_dvb,saa7134_alsa,saa7134
pcspkr 10496 0
soundcore 15200 1 snd
snd_page_alloc 16904 2 snd_intel8x0,snd_pcm
serio_raw 13316 0
intel_agp 34108 1
videobuf_core 26244 3 videobuf_dvb,saa7134,videobuf_dma_sg
tveeprom 20228 2 ivtv,saa7134
agpgart 42696 2 drm,intel_agp
shpchp 40212 0
parport_pc 40100 1
parport 42220 3 lp,ppdev,parport_pc
usbhid 42336 0
3c59x 49192 0
mii 13312 1 3c59x
floppy 64324 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit



They look loaded,then i tried to reroute the sound to alsa by using sox:

sox -q -c 2 -s -r 32000 -t alsa hw:1 -t alsa -r 32000 hw:0

This is the only way i can get the sound but it implicate starting sox every time i want to use TV or Radio...........

The /var/messages does not show any problems :


Apr 29 00:53:27 Ubuntu kernel: [ 13.200361] Linux video capture interface: v2.00
Apr 29 00:53:27 Ubuntu kernel: [ 13.446769] saa7130/34: v4l2 driver version 0.2.15 loaded
Apr 29 00:53:27 Ubuntu kernel: [ 13.447106] saa7134 0000:02:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr 29 00:53:27 Ubuntu kernel: [ 13.447119] saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 17, latency: 66, mmio: 0x40000000
Apr 29 00:53:27 Ubuntu kernel: [ 13.447133] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
Apr 29 00:53:27 Ubuntu kernel: [ 13.447248] saa7133[0]: board init: gpio is 6400000
Apr 29 00:53:27 Ubuntu kernel: [ 13.605809] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
Apr 29 00:53:27 Ubuntu kernel: [ 13.605832] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [ 13.605851] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [ 13.605871] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [ 13.605889] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [ 13.605908] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.605927] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.605945] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.605963] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 e0 f1 4f f0 73 05 29 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.605983] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
Apr 29 00:53:27 Ubuntu kernel: [ 13.606002] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
Apr 29 00:53:27 Ubuntu kernel: [ 13.606021] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 1e 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.606040] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.606058] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.606076] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.606095] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [ 13.606123] tveeprom 0-0050: Hauppauge model 67019, rev B4B4, serial# 5239264
Apr 29 00:53:27 Ubuntu kernel: [ 13.606131] tveeprom 0-0050: MAC address is 00-0D-FE-4F-F1-E0
Apr 29 00:53:27 Ubuntu kernel: [ 13.606137] tveeprom 0-0050: tuner model is Philips 8275A (idx 114, type 4)
Apr 29 00:53:27 Ubuntu kernel: [ 13.606145] tveeprom 0-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K)ATSC/DVB Digital (eeprom 0xfc)
Apr 29 00:53:27 Ubuntu kernel: [ 13.606152] tveeprom 0-0050: audio processor is SAA7131 (idx 41)
Apr 29 00:53:27 Ubuntu kernel: [ 13.606159] tveeprom 0-0050: decoder processor is SAA7131 (idx 35)
Apr 29 00:53:27 Ubuntu kernel: [ 13.606164] tveeprom 0-0050: has radio, has IR receiver, has IR transmitter
Apr 29 00:53:27 Ubuntu kernel: [ 13.606170] saa7133[0]: hauppauge eeprom: model=67019
Apr 29 00:53:27 Ubuntu kernel: [ 13.885196] tuner 0-004b: chip found @ 0x96 (saa7133[0])
Apr 29 00:53:27 Ubuntu kernel: [ 13.964088] tda829x 0-004b: setting tuner address to 61
Apr 29 00:53:27 Ubuntu kernel: [ 14.022981] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 29 00:53:27 Ubuntu kernel: [ 14.045005] ppdev: user-space parallel port driver
Apr 29 00:53:27 Ubuntu kernel: [ 14.096084] tda829x 0-004b: type set to tda8290+75a
Apr 29 00:53:27 Ubuntu kernel: [ 14.644024] intel8x0_measure_ac97_clock: measured 55969 usecs
Apr 29 00:53:27 Ubuntu kernel: [ 14.644033] intel8x0: clocking to 41146
Apr 29 00:53:27 Ubuntu kernel: [ 17.988392] input: HVR 1110 as /devices/virtual/input/input6
Apr 29 00:53:27 Ubuntu kernel: [ 17.994320] ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
Apr 29 00:53:27 Ubuntu kernel: [ 18.056323] saa7133[0]: registered device video0 [v4l2]
Apr 29 00:53:27 Ubuntu kernel: [ 18.056442] saa7133[0]: registered device vbi0
Apr 29 00:53:27 Ubuntu kernel: [ 18.056560] saa7133[0]: registered device radio0
Apr 29 00:53:27 Ubuntu kernel: [ 18.086624] saa7134 ALSA driver for DMA sound loaded
Apr 29 00:53:27 Ubuntu kernel: [ 18.086695] saa7133[0]/alsa: saa7133[0] at 0x40000000 irq 17 registered as card -2
Apr 29 00:53:27 Ubuntu kernel: [ 18.214944] dvb_init() allocating 1 frontend
Apr 29 00:53:27 Ubuntu kernel: [ 18.256592] DVB: registering new adapter (saa7133[0])
Apr 29 00:53:27 Ubuntu kernel: [ 18.256610] DVB: registering adapter 0 frontend -858993460 (Philips TDA10046H DVB-T)...
Apr 29 00:53:27 Ubuntu kernel: [ 18.331451] tda1004x: setting up plls for 48MHz sampling clock
Apr 29 00:53:27 Ubuntu kernel: [ 18.497660] lp0: using parport0 (interrupt-driven).
Apr 29 00:53:27 Ubuntu kernel: [ 18.621371] tda1004x: found firmware revision 20 -- ok
Apr 29 00:53:28 Ubuntu kernel: [ 24.071387] lirc_dev: IR Remote Control driver registered, major 61
Apr 29 00:53:28 Ubuntu kernel: [ 24.183952] ivtv: Start initialization, version 1.4.1
Apr 29 00:53:28 Ubuntu kernel: [ 24.186600] ivtv: End initialization



Everything look fine to me but no TV / Radio sound output without using sox.

The Card is not broken because this system has dual boot and when i run windows everything is fine :O)

I believe that the drivers are not able to route the sound from the pci port to the Alsa server.

This TV card does not have any jack sound output, no wire possible between TV card and sound card, sound goes over PCI no choice,which make a latency when using sox with Linux or under Windows i still have the sound not properly synchronized (really minimal but noticeable if you pay attention).

The Wire (Double jack 3.5) connection between TV sound out and the sound card Line In was a better concept as this work fine on my other Pinnacle TV Tuner with no latency but just fine...

Please doe anyone has any idea for get the TV sound from my HVR1110 over pci without using any service like sox ? (not working, big latency)

or maybe working HVR1110 drivers on Ubuntu 9.0.4, or a "wire Patch" who send the TV pci sound output to the sound server will help me...

Thx

[megamania]

I am posting here because desperate to make working my :
...
Everything look fine to me but no TV / Radio sound output without using sox.

The Card is not broken because this system has dual boot and when i run windows everything is fine :O)
...
Please doe anyone has any idea for get the TV sound from my HVR1110 over pci without using any service like sox ? (not working, big latency)

This is a known problem with no solution I'm aware of.

You can get direct audio (i.e. no sox) by using Mplayer/Mencoder (radio, analog tv, digital tv) or Kaffeine (digital TV).