maerlma
September 11th, 2008, 04:17 PM
hi all. i have LAMP server running on Hardy serving some web based applications. i'd like to setup a guest ftp server on this same box. i managed to get VirtualBox installed and even have a guest (Hardy as well) already installed. My trouble is correctly setting up the bridge for the host-based networking. When I enable the bridge, i'm unable to reach my webpages.
here's my /etc/network/interfaces:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
#address 10.0.0.28
#netmask 255.255.255.0
#gateway 10.0.0.1
#network bridge for VMs
iface br0 inet static
address 10.0.0.28
netmask 255.255.255.0
gateway 10.0.0.1
bridge_ports eth0
what am i missing?
here's my /etc/network/interfaces:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
#address 10.0.0.28
#netmask 255.255.255.0
#gateway 10.0.0.1
#network bridge for VMs
iface br0 inet static
address 10.0.0.28
netmask 255.255.255.0
gateway 10.0.0.1
bridge_ports eth0
what am i missing?