Nova-S Channel Scan / Import Problems

[fibble]

Hi,

I have been running with a single Nova-T DVB-T tuner on Mythbuntu 8.04 and things have been great.

I have just installed two Nova-S PCI cards, hooked them up to a new Quad LNB and tried scanning for channels in Myth-Setup. No luck.

I tried frequency: 10773000 sym rate: 10773000
And frequency: 10773000 sym rate: 10773000

both with no luck via MythSetup.

Doing a scan from the command line works on both Nova-S cards (dvb devices 0 and 1, the Nova-T is device 2)

scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E

scan -a 1 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E


That outputs a long list of channels as expected.

I tried outputting the results of the scan to /tmp/channels.conf, and using the "Import Channels" feature in mythsetup instead of a scan, I see a progress bar for a split second, then an empty channel list.

Am I missing something here? Have I done this correctly?

Has anyone else on the forums got a working setup using Nova-S PCI cards? If so how did you get your channels scanned or imported?

Any tips / ideas would be most gratefully accepted!

The channels.conf I tried to Import has lots of content, like:

BBC 1 London:10773:h:0:22000:5000:5001:6301
BBC 2 England:10773:h:0:22000:5100:5101:6302
ETV:10773:h:0:22000:5300:5301:6306
BBC TES 3:10773:h:0:22000:5200:5201:6315
BBC FOUR:10773:h:0:22000:5300:5301:6316
loads more below....


I have remote access to this box, so if any other output would be useful please ask and I can provide.

Thanks,

Andy

[AlecJ]

Hi try scanning with Myth
Freq Khz 104729000
polarity H
sym rate 22000000

Should see Channel 4

Ive just setup my Nova-S with a brand new 8.04 fully updated install.

What I did was to make a new Video Source called Astra, then using this web site
http://www.lyngsat.com/astra2d.html
I manualy scaned each freqency, going back to the scan after each freq had finished.
I then set Astra as the Video source for the DVB-S cards and the normal EIT for the DVB-T cards.
Ok it takes some time in the channel editor sorting through the channels, but this is Mythtv.

There is a guide on here for DVB-s install's, but sounds like your passed that point.

[ian dobson]

Hi,

The format for your channels.conf file doesn't look correct.

Try using wscan, I've used that several times when myth didn't want to scan for channels itself.

Have a look here http://mythtv.org/pipermail/mythtv-dev/2006-September/050835.html or
http://www.bioinfo-user.org.uk/dokuwiki/doku.php?id=notes:mythtv
or http://edafe.org/vdr/w_scan/

Regards
Ian Dobson

[tobiz]

Hi,

I have been running with a single Nova-T DVB-T tuner on Mythbuntu 8.04 and things have been great.

I have just installed two Nova-S PCI cards, hooked them up to a new Quad LNB and tried scanning for channels in Myth-Setup. No luck.

I tried frequency: 10773000 sym rate: 10773000
And frequency: 10773000 sym rate: 10773000

both with no luck via MythSetup.

Doing a scan from the command line works on both Nova-S cards (dvb devices 0 and 1, the Nova-T is device 2)

scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E

scan -a 1 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E


That outputs a long list of channels as expected.

I tried outputting the results of the scan to /tmp/channels.conf, and using the "Import Channels" feature in mythsetup instead of a scan, I see a progress bar for a split second, then an empty channel list.

Am I missing something here? Have I done this correctly?

Has anyone else on the forums got a working setup using Nova-S PCI cards? If so how did you get your channels scanned or imported?

Any tips / ideas would be most gratefully accepted!

The channels.conf I tried to Import has lots of content, like:

BBC 1 London:10773:h:0:22000:5000:5001:6301
BBC 2 England:10773:h:0:22000:5100:5101:6302
ETV:10773:h:0:22000:5300:5301:6306
BBC TES 3:10773:h:0:22000:5200:5201:6315
BBC FOUR:10773:h:0:22000:5300:5301:6316
loads more below....


I have remote access to this box, so if any other output would be useful please ask and I can provide.

Thanks,

Andy
fibble,
Exactly the same problem as you re mythtv and scan for dvb-s channels; did you ever get it to work if so how? I tried others in the post but no success.

[nickrout]

your symbol rate is certainly wrong. go here (http://www.lyngsat.com/europe.html)

choose the correct satellite (astra 2A 2B or 2C by the look of it)

but also, have you set up your lnb first?