PDA

View Full Version : [ubuntu] fans reading 0 rpm in sensors-applet



dreaminhere
September 3rd, 2008, 04:16 PM
Using 64 bit 8.04 with a abit ip-35 mobo and intel quad core. I can see all my temps but no rpm on my fans. I have a cpu fan and two case fans

If I run sensors I get

w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.21 V (min = +0.00 V, max = +1.74 V)
in1: +7.29 V (min = +6.76 V, max = +3.48 V) ALARM
AVCC: +3.18 V (min = +2.59 V, max = +0.80 V) ALARM
3VCC: +3.18 V (min = +0.74 V, max = +2.06 V) ALARM
in4: +1.26 V (min = +1.03 V, max = +1.03 V) ALARM
in5: +1.10 V (min = +2.04 V, max = +1.68 V) ALARM
in6: +3.51 V (min = +2.46 V, max = +3.30 V) ALARM
VSB: +3.18 V (min = +0.02 V, max = +0.61 V) ALARM
VBAT: +3.15 V (min = +0.00 V, max = +1.06 V) ALARM
Case Fan: 0 RPM (min = 0 RPM, div = 128)
CPU Fan: 0 RPM (min = 5273 RPM, div = 128) ALARM
Aux Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +35.0C (high = -64.0C, hyst = -127.0C) ALARM sensor = thermistor
CPU Temp: +17.0C (high = +80.0C, hyst = -127.0C) sensor = diode
AUX Temp: -11.5C (high = -126.5C, hyst = +75.5C) sensor = thermistor


Any ideas how to get the fans to show proper rpm?

dreaminhere
September 6th, 2008, 08:41 PM
bump

RedSquirrel
September 6th, 2008, 10:20 PM
Have a look here (http://www.lm-sensors.org/wiki/FAQ/Chapter3#Fanssometimesalwaysread0).