PDA

View Full Version : [mythbuntu] FusionHDTV5 RT Gold - Set Up Issues



yojimba
August 30th, 2008, 07:31 PM
Purchased this card because it is supposed to work 'out-of-box'. http://www.mythtv.org/wiki/index.php/DViCO_FusionHDTV5_RT_Gold. Unfortunately I haven't found that to be the case.

Tested the card on Win XP and it works fine; recording; signal pick-up, etc. Want to get the card working using OTA with Mythbuntu . . .

Clean Install Mythbuntu 8.041 - Kernel 2.6.24-19

Using http://www.mythtv.org/wiki/index.php/DViCO_FusionHDTV5_Gold as a set-up reference guide (for MythTV set-up as the rest is supposed to work out-of-box) I have the following issues:

1) mythtv-setup-> General: there is no selection for ATSC only NTSC and PAL options. I have selected NTSC.

2)Capture Card Setup: the system detects only [DVB]:0] but not analog [V4L:/dev/video0]

3)OTA Channel Scan: channel EIT data is received but no channel signals are picked up (with same antenna that the card in WinXP that has no problems getting good signals).

What's up?

yojimba
September 2nd, 2008, 11:19 PM
Wow . . . I've posted threads on two different video cards and haven't had a response. With this particular card being popular I thought I'd get feedback from someone.

Anyone? Anyone? Buller?