afterstep13
July 25th, 2008, 01:05 AM
I have a davicom dm9601 usb ethernet card.
When i plug in the device, it is detected and drivers are
loaded, but i can't connect to internet using it.
The device fails to get an ip address.
It works perfectly on XP, (same laptop) but not on hardy-32.
Other people seem to have used it with hardy
http://ubuntuforums.org/showpost.php?p=5440433&postcount=28
dmesg
[ 1606.469980] usb 3-3: new full speed USB device using ohci_hcd and address 7
[ 1606.714779] usb 3-3: configuration #1 chosen from 1 choice
[ 1606.806122] eth1: register 'dm9601' at usb-0000:00:02.0-3, Davicom DM9601 USB Ethernet, 00:60:6e:00:06:be
[ 1606.912379] eth1: link down
[ 1606.958629] ADDRCONF(NETDEV_UP): eth1: link is not ready
ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:60:6e:00:06:be
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
i have too do ifconfig eth1 down and then up before i get,
[ 2128.701718] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
dhclient eth1 gives me,
Listening on LPF/eth1/00:60:6e:00:06:be
Sending on LPF/eth1/00:60:6e:00:06:be
Sending on Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
then ifconfig eth1 shows
eth1 Link encap:Ethernet HWaddr 00:60:6e:00:06:be
inet6 addr: fe80::260:6eff:fe00:6be/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:2 dropped:0 overruns:0 frame:2
TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:5239 (5.1 KB)
i think proper drivers are loaded for the deice as
lsusb
Bus 003 Device 008: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 To Fast Ethernet Adapter
and lsmod | grep net
usbnet 20232 1 dm9601
mii 6400 2 dm9601,usbnet
usbcore 146028 8 dm9601,usbnet,uvcvideo,ndiswrapper,usbhid,ohci_hcd ,ehci_hcd
I have no idea why it doesnot work, i have been trying for a week
now.
Please help
When i plug in the device, it is detected and drivers are
loaded, but i can't connect to internet using it.
The device fails to get an ip address.
It works perfectly on XP, (same laptop) but not on hardy-32.
Other people seem to have used it with hardy
http://ubuntuforums.org/showpost.php?p=5440433&postcount=28
dmesg
[ 1606.469980] usb 3-3: new full speed USB device using ohci_hcd and address 7
[ 1606.714779] usb 3-3: configuration #1 chosen from 1 choice
[ 1606.806122] eth1: register 'dm9601' at usb-0000:00:02.0-3, Davicom DM9601 USB Ethernet, 00:60:6e:00:06:be
[ 1606.912379] eth1: link down
[ 1606.958629] ADDRCONF(NETDEV_UP): eth1: link is not ready
ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:60:6e:00:06:be
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
i have too do ifconfig eth1 down and then up before i get,
[ 2128.701718] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
dhclient eth1 gives me,
Listening on LPF/eth1/00:60:6e:00:06:be
Sending on LPF/eth1/00:60:6e:00:06:be
Sending on Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
then ifconfig eth1 shows
eth1 Link encap:Ethernet HWaddr 00:60:6e:00:06:be
inet6 addr: fe80::260:6eff:fe00:6be/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:2 dropped:0 overruns:0 frame:2
TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:5239 (5.1 KB)
i think proper drivers are loaded for the deice as
lsusb
Bus 003 Device 008: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 To Fast Ethernet Adapter
and lsmod | grep net
usbnet 20232 1 dm9601
mii 6400 2 dm9601,usbnet
usbcore 146028 8 dm9601,usbnet,uvcvideo,ndiswrapper,usbhid,ohci_hcd ,ehci_hcd
I have no idea why it doesnot work, i have been trying for a week
now.
Please help