Audio Problems with dvd, iso and recordings [Archive]

mark467

July 7th, 2008, 11:36 PM

1) Installed: 0.21.0+fixes16838-0ubuntu3.1
Candidate: 0.21.0+fixes16838-0ubuntu3.1
Version table:
*** 0.21.0+fixes16838-0ubuntu3.1 0
500 http://archive.ubuntu.com hardy-updates/multiverse Packages
100 /var/lib/dpkg/status
0.21.0+fixes16838-0ubuntu3 0
500 http://archive.ubuntu.com hardy/multiverse Packages
Ubuntu 8.04

2) i386 (p4 2.8 ht)

3) yes installed the prop. codecs w32codecs libdvdcss2 ffmpeg
medibuntu? when i searched that package name I came up with a big list of packages? Which one?

It worked fine for about a month and freaked out in the middle of a movie....

here is dmesg if it helps

dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d80
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6DC0 checksum 0
[ 0.000000] ACPI: RSDP 000F6DC0, 0014 (r0 P4M800)
[ 0.000000] ACPI: RSDT 3FFF3040, 002C (r1 P4M800 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FFF30C0, 0074 (r1 P4M800 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FFF3180, 53AC (r1 P4M800 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF8580, 0068 (r1 P4M800 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081
[ 0.000000] Kernel command line: root=UUID=5f287288-9b68-416b-9bbb-be6bb0c24388 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2533.571 MHz processor.
[ 22.445385] Console: colour VGA+ 80x25
[ 22.445390] console [tty0] enabled
[ 22.446075] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 22.446778] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 22.483605] Memory: 1027232k/1048512k available (2177k kernel code, 20592k reserved, 1006k data, 368k init, 131008k highmem)
[ 22.483617] virtual kernel memory layout:
[ 22.483618] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 22.483619] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 22.483620] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 22.483622] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 22.483623] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 22.483624] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
[ 22.483625] .text : 0xc0100000 - 0xc0320434 (2177 kB)
[ 22.483628] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 22.483687] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 22.563685] Calibrating delay using timer specific routine.. 5073.65 BogoMIPS (lpj=10147301)
[ 22.563719] Security Framework initialized
[ 22.563730] SELinux: Disabled at boot.
[ 22.563749] AppArmor: AppArmor initialized
[ 22.563755] Failure registering capabilities with primary security module.
[ 22.563766] Mount-cache hash table entries: 512
[ 22.563939] Initializing cgroup subsys ns
[ 22.563945] Initializing cgroup subsys cpuacct
[ 22.563959] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[ 22.563975] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 22.563978] CPU: L2 cache: 512K
[ 22.563981] CPU: Hyper-Threading is disabled
[ 22.563984] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[ 22.563998] Compat vDSO mapped to ffffe000.
[ 22.564016] Checking 'hlt' instruction... OK.
[ 22.580142] SMP alternatives: switching to UP code
[ 22.581918] Freeing SMP alternatives: 11k freed
[ 22.582062] Early unpacking initramfs... done
[ 22.923255] ACPI: Core revision 20070126
[ 22.923322] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 22.927277] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
[ 22.927324] Total of 1 processors activated (5073.65 BogoMIPS).
[ 22.928092] ENABLING IO-APIC IRQs
[ 22.928420] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 23.075533] Brought up 1 CPUs
[ 23.075594] CPU0 attaching sched-domain:
[ 23.075598] domain 0: span 01
[ 23.075600] groups: 01
[ 23.075825] net_namespace: 64 bytes
[ 23.075838] Booting paravirtualized kernel on bare hardware
[ 23.076454] Time: 21:33:17 Date: 07/07/08
[ 23.076487] NET: Registered protocol family 16
[ 23.076738] EISA bus registered
[ 23.076775] ACPI: bus type pci registered
[ 23.084303] PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
[ 23.084305] PCI: Using configuration type 1
[ 23.084329] Setting up standard PCI resources
[ 23.093286] ACPI: EC: Look up EC in DSDT
[ 23.099504] ACPI: Interpreter enabled
[ 23.099509] ACPI: (supports S0 S1 S4 S5)
[ 23.099526] ACPI: Using IOAPIC for interrupt routing
[ 23.106963] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.108207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.153514] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 23.153702] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 23.153890] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 23.154060] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 23.154226] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 23.154384] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 23.154542] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 23.154699] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 23.154900] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 23.155082] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 23.155262] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 23.155482] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 23.155622] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.155663] pnp: PnP ACPI init
[ 23.155673] ACPI: bus type pnp registered
[ 23.160193] pnp: PnP ACPI: found 13 devices
[ 23.160197] ACPI: ACPI bus type pnp unregistered
[ 23.160202] PnPBIOS: Disabled by ACPI PNP
[ 23.160500] PCI: Using ACPI for IRQ routing
[ 23.160504] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.183444] NET: Registered protocol family 8
[ 23.183446] NET: Registered protocol family 20
[ 23.183533] AppArmor: AppArmor Filesystem Enabled
[ 23.187433] Time: tsc clocksource has been installed.
[ 23.195478] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 23.195482] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 23.195485] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 23.195488] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 23.195491] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 23.195495] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 23.195497] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 23.195500] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
[ 23.195503] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 23.195507] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 23.195510] system 00:00: iomem range 0xfff80000-0xfffeffff could not be reserved
[ 23.195518] system 00:02: ioport range 0x400-0x47f has been reserved
[ 23.195521] system 00:02: ioport range 0x500-0x50f has been reserved
[ 23.195528] system 00:03: ioport range 0xb78-0xb7b has been reserved
[ 23.195531] system 00:03: ioport range 0xf78-0xf7b has been reserved
[ 23.195534] system 00:03: ioport range 0xa78-0xa7b has been reserved
[ 23.195537] system 00:03: ioport range 0xe78-0xe7b has been reserved
[ 23.195539] system 00:03: ioport range 0xbbc-0xbbf has been reserved
[ 23.195542] system 00:03: ioport range 0xfbc-0xfbf has been reserved
[ 23.195545] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 23.195547] system 00:03: ioport range 0x290-0x297 has been reserved
[ 23.226064] PCI: Bridge: 0000:00:01.0
[ 23.226067] IO window: disabled.
[ 23.226073] MEM window: f8000000-f9ffffff
[ 23.226077] PREFETCH window: f0000000-f7ffffff
[ 23.226097] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 23.226111] NET: Registered protocol family 2
[ 23.263505] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 23.263909] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 23.264982] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 23.265629] TCP: Hash tables configured (established 131072 bind 65536)
[ 23.265634] TCP reno registered
[ 23.275606] checking if image is initramfs... it is
[ 23.727212] Switched to high resolution mode on CPU 0
[ 23.940422] Freeing initrd memory: 7458k freed
[ 23.941093] audit: initializing netlink socket (disabled)
[ 23.941110] audit(1215466397.352:1): initialized
[ 23.941335] highmem bounce pool size: 64 pages
[ 23.943604] VFS: Disk quotas dquot_6.5.1
[ 23.943701] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 23.943868] io scheduler noop registered
[ 23.943871] io scheduler anticipatory registered
[ 23.943873] io scheduler deadline registered
[ 23.943886] io scheduler cfq registered (default)
[ 23.943902] PCI: VIA PCI bridge detected. Disabling DAC.
[ 23.943972] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 23.943995] Boot video device is 0000:01:00.0
[ 23.944330] isapnp: Scanning for PnP cards...
[ 24.298536] isapnp: No Plug & Play device found
[ 24.333926] Real Time Clock Driver v1.12ac
[ 24.334045] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 24.334176] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.334338] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 24.335134] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.335526] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 24.336514] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 24.336596] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 24.336726] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 24.337141] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 24.337147] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 24.339188] mice: PS/2 mouse device common for all mice
[ 24.339357] EISA: Probing bus 0 at eisa.0
[ 24.339397] EISA: Detected 0 cards.
[ 24.339400] cpuidle: using governor ladder
[ 24.339402] cpuidle: using governor menu
[ 24.339513] NET: Registered protocol family 1
[ 24.339549] Using IPI No-Shortcut mode
[ 24.339589] registered taskstats version 1
[ 24.339700] Magic number: 0:788:600
[ 24.339766] hash matches device ptyd4
[ 24.339855] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 24.339857] EDD information not available.
[ 24.340270] Freeing unused kernel memory: 368k freed
[ 24.366892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 25.594299] fuse init (API version 7.9)
[ 25.612112] ACPI: Fan [FAN] (on)
[ 25.618955] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 25.620930] ACPI: Thermal Zone [THRM] (32 C)
[ 26.346849] SCSI subsystem initialized
[ 26.429903] libata version 3.00 loaded.
[ 26.445977] usbcore: registered new interface driver usbfs
[ 26.446010] usbcore: registered new interface driver hub
[ 26.455863] sata_via 0000:00:0f.0: version 2.3
[ 26.456155] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 26.456164] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 26.456216] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 26.464124] usbcore: registered new device driver usb
[ 26.486407] scsi0 : sata_via
[ 26.494479] USB Universal Host Controller Interface driver v3.0
[ 26.505782] scsi1 : sata_via
[ 26.507387] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 16
[ 26.507391] ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 16
[ 26.541237] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 26.541246] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 26.709781] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 26.921657] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 26.932535] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 26.932598] ACPI: PCI interrupt for device 0000:00:0f.1 disabled
[ 26.935283] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 26.935293] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 26.935306] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.935711] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 26.935750] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e700
[ 26.935930] usb usb1: configuration #1 chosen from 1 choice
[ 26.935959] hub 1-0:1.0: USB hub found
[ 26.935966] hub 1-0:1.0: 2 ports detected
[ 27.037772] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 27.037789] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 27.037819] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 27.037844] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e800
[ 27.037984] usb usb2: configuration #1 chosen from 1 choice
[ 27.038013] hub 2-0:1.0: USB hub found
[ 27.038020] hub 2-0:1.0: 2 ports detected
[ 27.141676] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 27.141693] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 27.141727] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 27.141752] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e900
[ 27.141879] usb usb3: configuration #1 chosen from 1 choice
[ 27.141907] hub 3-0:1.0: USB hub found
[ 27.141916] hub 3-0:1.0: 2 ports detected
[ 27.245635] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 27.245653] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 27.245684] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 27.245710] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000ea00
[ 27.245840] usb usb4: configuration #1 chosen from 1 choice
[ 27.245868] hub 4-0:1.0: USB hub found
[ 27.245876] hub 4-0:1.0: 2 ports detected
[ 27.349698] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 27.349718] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 27.349750] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 27.349797] ehci_hcd 0000:00:10.4: irq 17, io mem 0xfb000000
[ 27.361474] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 27.361642] usb usb5: configuration #1 chosen from 1 choice
[ 27.361674] hub 5-0:1.0: USB hub found
[ 27.361683] hub 5-0:1.0: 8 ports detected
[ 27.465886] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 27.465897] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 27.466218] eth0: VIA Rhine II at 0xfb001000, 00:16:17:11:db:95, IRQ 18.
[ 27.466929] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[ 27.467055] pata_via 0000:00:0f.1: version 0.3.3
[ 27.467077] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 27.468559] scsi2 : pata_via
[ 27.469456] scsi3 : pata_via
[ 27.471108] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe600 irq 14
[ 27.471111] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe608 irq 15
[ 27.676934] ata3.00: ATA-7: MAXTOR STM3500630A, 3.AAE, max UDMA/100
[ 27.676939] ata3.00: 976773168 sectors, multi 16: LBA48
[ 27.743530] ata3.00: configured for UDMA/100
[ 28.077413] ata4.00: ATAPI: SONY DVD RW DRU-190A, 1.64, max UDMA/66
[ 28.265200] ata4.00: configured for UDMA/66
[ 28.265350] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM350063 3.AA PQ: 0 ANSI: 5
[ 28.266922] scsi 3:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.64 PQ: 0 ANSI: 5
[ 28.282738] Driver 'sd' needs updating - please use bus_type methods
[ 28.282848] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 28.282865] sd 2:0:0:0: [sda] Write Protect is off
[ 28.282869] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.282893] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.282952] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 28.282966] sd 2:0:0:0: [sda] Write Protect is off
[ 28.282969] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.282991] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.282996] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 28.299236] sda1 sda2 <<6>usb 5-7: new high speed USB device using ehci_hcd and address 2
[ 28.319757] sda5 >
[ 28.319880] sd 2:0:0:0: [sda] Attached SCSI disk
[ 28.327975] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 28.327999] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 28.333978] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 28.333986] Uniform CD-ROM driver Revision: 3.20
[ 28.334057] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 28.609977] Attempting manual resume
[ 28.609982] swsusp: Resume From Partition 8:5
[ 28.609984] PM: Checking swsusp image.
[ 28.610207] PM: Resume from disk failed.
[ 28.620666] usb 5-7: configuration #1 chosen from 1 choice
[ 28.637360] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 28.637368] EXT3-fs: write access will be enabled during recovery.
[ 29.173921] kjournald starting. Commit interval 5 seconds
[ 29.173941] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 29.173950] ext3_orphan_cleanup: deleting unreferenced inode 12599317
[ 29.173978] ext3_orphan_cleanup: deleting unreferenced inode 12599304
[ 29.173986] ext3_orphan_cleanup: deleting unreferenced inode 12599303
[ 29.173992] ext3_orphan_cleanup: deleting unreferenced inode 12599302
[ 29.173998] ext3_orphan_cleanup: deleting unreferenced inode 12599301
[ 29.174004] ext3_orphan_cleanup: deleting unreferenced inode 12599300
[ 29.174010] EXT3-fs: sda1: 6 orphan inodes deleted
[ 29.174012] EXT3-fs: recovery complete.
[ 29.177182] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.296939] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 35.456607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 35.508194] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.743093] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 35.756560] parport_pc 00:0a: reported by Plug and Play ACPI
[ 35.756665] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 35.978734] Linux agpgart interface v0.102
[ 36.141334] input: Power Button (FF) as /devices/virtual/input/input4
[ 36.169216] ACPI: Power Button (FF) [PWRF]
[ 36.169290] input: Power Button (CM) as /devices/virtual/input/input5
[ 36.186058] agpgart: Detected VIA P4M800 chipset
[ 36.201194] ACPI: Power Button (CM) [PWRB]
[ 36.201272] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 36.209196] agpgart: AGP aperture is 128M @ 0xe8000000
[ 36.233191] ACPI: Sleep Button (CM) [SLPB]
[ 36.257153] Linux video capture interface: v2.00
[ 36.724924] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 36.725009] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 19
[ 36.725080] cx88[0]: subsystem: 1002:00f8, board: ATI TV Wonder Pro [card=4,autodetected]
[ 36.725084] cx88[0]: TV tuner type 44, Radio tuner type -1
[ 36.882511] cx88[0]/0: found at 0000:00:06.0, rev: 5, irq: 19, latency: 32, mmio: 0xfa000000
[ 37.184687] tuner 1-0043: chip found @ 0x86 (cx88[0])
[ 37.184716] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 37.184720] tuner 1-0043: type set to tda9887
[ 37.187590] All bytes are equal. It is not a TEA5767
[ 37.187593] tuner 1-0060: chip found @ 0xc0 (cx88[0])
[ 37.187614] tuner-simple 1-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant))
[ 37.187617] tuner 1-0060: type set to Philips 4 in 1 (ATI
[ 37.187620] tuner-simple 1-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant))
[ 37.187622] tuner 1-0060: type set to Philips 4 in 1 (ATI
[ 37.232859] cx88[0]/0: registered device video0 [v4l2]
[ 37.232887] cx88[0]/0: registered device vbi0
[ 38.093511] nvidia: module license 'NVIDIA' taints kernel.
[ 38.751442] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 38.751766] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 38.860775] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 38.860786] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21
[ 38.860933] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 39.052598] phy0: Selected rate control algorithm 'simple'
[ 39.143069] usbcore: registered new interface driver rt73usb
[ 41.247594] lp0: using parport0 (interrupt-driven).
[ 41.441822] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
[ 41.556936] wlan0: Initial auth_alg=0
[ 41.556944] wlan0: authenticate with AP 00:30:bd:f8:92:07
[ 41.558826] wlan0: RX authentication from 00:30:bd:f8:92:07 (alg=0 transaction=2 status=0)
[ 41.558829] wlan0: authenticated
[ 41.558833] wlan0: associate with AP 00:30:bd:f8:92:07
[ 41.561465] wlan0: RX AssocResp from 00:30:bd:f8:92:07 (capab=0x1 status=0 aid=6)
[ 41.561470] wlan0: associated
[ 42.093900] EXT3 FS on sda1, internal journal
[ 42.191333] NET: Registered protocol family 17
[ 43.575624] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 45.771699] No dock devices found.
[ 46.837679] NET: Registered protocol family 10
[ 46.838025] lo: Disabled Privacy Extensions
[ 49.480051] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 49.480058] apm: overridden by ACPI.
[ 57.403462] wlan0: no IPv6 routers present
[ 62.246480] eth0: link down
[ 62.249193] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 66.298209] lirc_dev: IR Remote Control driver registered, major 61
[ 66.316516] lirc_mceusb2: no version for "lirc_get_pdata" found: kernel tainted.
[ 66.318927]
[ 66.318933] lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.36 $
[ 66.318936] lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>
[ 66.334375] usbcore: registered new interface driver lirc_mceusb2
[ 67.709106] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 67.709264] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 67.709345] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode