View Full Version : [ubuntu] DVD-RW not mounting blank discs
July 7th, 2008, 03:58 AM
I've read most of the posts on similar issues with this problem to no avail. I cannot get my machine to mount a blank DVD in order to burn a movie. This all happened after upgrading to Hardy. Does anyone know why this is happening? My drive is definitely a DVD-RW drive and I seem to have all the codecs installed that everyone recommends. Can we please get some help with this issue. It seems I am not alone. I have used Ubuntu as my primary OS since it was first made available.
July 7th, 2008, 04:06 AM
You can't mount blank discs, but I know what you mean, I had a similar problem once(which intrestingly enough was solved by restarting with a blank disk in the drive btw). I'm sure dmesg will have something to say about the drive, it had a lot to say when I had my problem:
dmesg | tail -n 20
paste output back please.
July 8th, 2008, 03:36 AM
Thanks scragar for the response. The following is the output I receive from your command:
[ 90.210749] domain 0: span 03
[ 90.210752] groups: 02 01
[ 90.210757] domain 1: span 03
[ 90.210760] groups: 03
[ 90.210764] domain 2: span 03
[ 90.210768] groups: 03
[ 101.599834] NET: Registered protocol family 17
[ 103.651390] wlan0: Initial auth_alg=0
[ 103.651398] wlan0: authenticate with AP 00:1b:2f:df:e0:98
[ 103.652756] wlan0: RX authentication from 00:1b:2f:df:e0:98 (alg=0 transaction=2 status=0)
[ 103.652761] wlan0: authenticated
[ 103.652765] wlan0: associate with AP 00:1b:2f:df:e0:98
[ 103.654420] wlan0: RX AssocResp from 00:1b:2f:df:e0:98 (capab=0x411 status=0 aid=3)
[ 103.654426] wlan0: associated
[ 103.654506] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
[ 103.654512] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[ 103.654516] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[ 103.654521] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[ 103.657328] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 120.489086] wlan0: no IPv6 routers present
It doesn't look like this will be helpful...
I appreciate your help and would love any other advise.
I just tried dmesg by itself and got a lot of system info including the following that I cut out. Perhaps this is helpful.
[ 44.537817] sda1 sda2 sda3 sda4
[ 44.559227] sd 0:0:0:0: [sda] Attached SCSI disk
[ 44.563943] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 44.563963] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 44.566687] usb 1-2: USB disconnect, address 2
[ 46.747919] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 46.747924] Uniform CD-ROM driver Revision: 3.20
[ 46.747973] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 44.799563] usb 1-2: new full speed USB device using uhci_hcd and address
July 8th, 2008, 09:23 AM
I used to get lot's of messages regarding the cd rom not being ready and asking me to check the drive,
I'm lost as to a solution, there's nothing showing the problem there.:(
July 8th, 2008, 09:25 AM
Sometimes the brand can be problematical. There are some I've been able to use with Nero & other Windows software, but not with my stand-alone DVD recorder or with some Linux software.
Powered by vBulletin® Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.