webcam fails after 2.6.24-19-virtual

[linux6994]

After updating to 2.6.24-19-virtual my /dev/video0 is not accessable by camorama or any other video like kopete. modprobe gspca does not work since gspca module is not present. If I fall back to 2.6.24-18-generic the webcam works yet my vm will not

Any ideas?

lsusb
Bus 004 Device 002: ID 067b:2507 Prolific Technology, Inc. PL2507 Hi-speed USB to IDE bridge controller
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:08d7 Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 03f0:1617 Hewlett-Packard LaserJet 3015
Bus 001 Device 001: ID 0000:0000

[nexxus07]

I have a similar problem. Also using the 2.6.24-19-virtual and my wireless network card is not recognized anymore (Thinkpad x41). So either networking or vm.
Haven't tried an earlier virtual kernel yet though ..

lshw:

*-network
description: Wireless interface
product: AR5212 802.11abg NIC
vendor: Atheros Communications Inc.
physical id: 2
bus info: pci@0000:04:02.0
logical name: wifi0
version: 01
serial: 00:14:a4:3a:05:9f
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=ath_pci ip=192.168.2.26 latency=168 maxlatency=28 mingnt=10 module=ath_pci multicast=yes wireless=IEEE 802.11g