Stambo00
June 20th, 2008, 10:05 PM
I have been unable to mount my 2gb Ipod Shuffle in Hardy.
dmesg returns the following:
[ 117.527687] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 117.771046] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.014420] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.257802] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.390109] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 118.390120] end_request: I/O error, dev sdc, sector 0
[ 118.390128] Buffer I/O error on device sdc, logical block 0
[ 118.390152] Dev sdc: unable to read RDB block 0
[ 118.501179] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.744560] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.987941] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.231327] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.474828] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.718077] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.850389] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 119.850399] end_request: I/O error, dev sdc, sector 0
[ 119.850404] Buffer I/O error on device sdc, logical block 0
[ 119.961452] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.204835] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.226318] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 120.226323] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 120.448213] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.691592] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.938973] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.178362] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.310655] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 121.310665] end_request: I/O error, dev sdc, sector 0
[ 121.310673] Buffer I/O error on device sdc, logical block 0
[ 121.421764] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.582651] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 121.582657] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 121.669105] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.908493] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.151873] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.395249] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.638628] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.770927] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 122.770938] end_request: I/O error, dev sdc, sector 24
[ 122.770947] Buffer I/O error on device sdc, logical block 3
[ 122.882018] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.125389] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.368770] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.612142] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.855531] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.098896] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.231198] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 124.231209] end_request: I/O error, dev sdc, sector 24
[ 124.231218] Buffer I/O error on device sdc, logical block 3
[ 124.342278] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.585657] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.829036] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.072413] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.315843] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.559168] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.691469] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 125.691480] end_request: I/O error, dev sdc, sector 0
[ 125.802552] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.045932] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.293298] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.536682] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.720894] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 126.720901] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 126.780059] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.023436] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.159722] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 127.159734] end_request: I/O error, dev sdc, sector 0
[ 127.159740] printk: 1 messages suppressed.
[ 127.159744] Buffer I/O error on device sdc, logical block 0
[ 127.159768] unable to read partition table
[ 127.160143] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 127.160217] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 127.298749] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.542122] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.785493] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.032863] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.276240] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.519632] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.655913] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 128.655926] end_request: I/O error, dev sdc, sector 0
[ 128.766997] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.010367] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.253747] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.497123] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.740507] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.987882] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.120179] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 130.120190] end_request: I/O error, dev sdc, sector 0
[ 130.247210] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.490591] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.733976] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.977353] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.220731] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.464105] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.596407] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 131.596416] end_request: I/O error, dev sdc, sector 0
[ 131.640159] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 131.640167] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 131.707524] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.950861] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.194244] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.437619] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.681002] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.924379] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 133.056683] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 133.056692] end_request: I/O error, dev sdc, sector 0
[ 133.056723] printk: 9 messages suppressed.
[ 133.056727] Buffer I/O error on device sdc, logical block 0
[ 135.358183] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 135.601577] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 135.844930] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.088312] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.335807] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.580067] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.712603] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 136.712616] end_request: I/O error, dev sdc, sector 0
[ 136.712623] Buffer I/O error on device sdc, logical block 0
[ 136.822431] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.065810] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.309192] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.552570] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.795949] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 138.039330] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 138.171624] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 138.171633] end_request: I/O error, dev sdc, sector 0
[ 141.275939] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 141.275946] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 151.954912] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 151.954918] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 153.763044] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 153.874923] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.118311] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.361681] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.605056] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.852454] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.099803] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.343177] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.590551] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.829935] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 156.073310] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 156.205622] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 156.205633] end_request: I/O error, dev sdc, sector 4
[ 156.205675] FAT: bread failed, FSINFO block (sector = 1)
[ 288.952782] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 288.952789] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 320.321064] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 320.321071] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 500.028463] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 500.028470] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 572.968700] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 572.968707] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 575.917321] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 575.917327] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 576.502468] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 576.612307] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 576.855681] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.099054] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.342435] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.585813] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.833183] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.966477] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 577.966489] end_request: I/O error, dev sdc, sector 0
[ 577.966555] FAT: unable to read boot sector
[ 584.467874] usb 5-7: USB disconnect, address 4
[ 593.828370] usb 5-8: new high speed USB device using ehci_hcd and address 5
[ 593.961373] usb 5-8: configuration #1 chosen from 2 choices
[ 593.961938] scsi3 : SCSI emulation for USB Mass Storage devices
[ 593.962318] usb-storage: device found at 5
[ 593.962323] usb-storage: waiting for device to settle before scanning
[ 598.947482] usb-storage: device scan complete
[ 598.948017] scsi 3:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2
[ 598.949961] sd 3:0:0:0: [sdc] 991232 2048-byte hardware sectors (2030 MB)
[ 599.063036] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 599.191924] sd 3:0:0:0: [sdc] Write Protect is off
[ 599.191933] sd 3:0:0:0: [sdc] Mode Sense: 64 00 00 08
[ 599.191940] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 599.194031] sd 3:0:0:0: [sdc] 991232 2048-byte hardware sectors (2030 MB)
[ 599.302419] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 599.435261] sd 3:0:0:0: [sdc] Write Protect is off
[ 599.435270] sd 3:0:0:0: [sdc] Mode Sense: 64 00 00 08
[ 599.435276] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 599.435287] sdc:<6>usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 599.793145] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.036533] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.279913] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.523299] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.766684] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.900022] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 600.900037] end_request: I/O error, dev sdc, sector 0
[ 600.900042] printk: 4 messages suppressed.
[ 600.900046] Buffer I/O error on device sdc, logical block 0
[ 601.010037] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.257415] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.504785] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.748160] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.991535] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.234914] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.367275] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 602.367289] end_request: I/O error, dev sdc, sector 0
[ 602.367296] Buffer I/O error on device sdc, logical block 0
[ 602.478287] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.722666] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.965045] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.208684] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.451812] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.695185] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.827549] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 603.827585] end_request: I/O error, dev sdc, sector 0
[ 603.827593] Buffer I/O error on device sdc, logical block 0
[ 603.939570] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.181947] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.425339] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.671244] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.912090] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.159457] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.291933] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 605.291945] end_request: I/O error, dev sdc, sector 0
[ 605.291953] Buffer I/O error on device sdc, logical block 0
[ 605.403829] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.650211] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.893586] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.136965] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.384330] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.627704] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.760064] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 606.760077] end_request: I/O error, dev sdc, sector 0
[ 606.760086] Buffer I/O error on device sdc, logical block 0
[ 606.760112] ldm_validate_partition_table(): Disk read failed.
[ 606.871083] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.114472] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.359755] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.601242] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.844600] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.091976] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.224327] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 608.224339] end_request: I/O error, dev sdc, sector 0
[ 608.224347] Buffer I/O error on device sdc, logical block 0
[ 608.335341] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.578737] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.822113] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.065482] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.308860] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.552252] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.685599] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 609.685612] end_request: I/O error, dev sdc, sector 0
[ 609.685618] Buffer I/O error on device sdc, logical block 0
[ 609.795629] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.042997] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.286754] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.529752] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.773136] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.016515] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.152853] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 611.152868] end_request: I/O error, dev sdc, sector 0
[ 611.152875] Buffer I/O error on device sdc, logical block 0
[ 611.263877] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.507263] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.754637] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.998011] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.241374] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.484769] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.617115] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 612.617129] end_request: I/O error, dev sdc, sector 0
[ 612.617136] Buffer I/O error on device sdc, logical block 0
[ 612.617162] Dev sdc: unable to read RDB block 0
[ 612.728145] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.971540] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.214904] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.458286] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.701656] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.945042] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.077383] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 614.077395] end_request: I/O error, dev sdc, sector 0
[ 614.077403] Buffer I/O error on device sdc, logical block 0
[ 614.188414] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.431802] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.675172] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.918556] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.165924] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.409297] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.541648] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 615.541660] end_request: I/O error, dev sdc, sector 0
[ 615.541669] Buffer I/O error on device sdc, logical block 0
[ 615.652676] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.896056] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.139446] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.386805] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.630194] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.873567] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.005910] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 617.005922] end_request: I/O error, dev sdc, sector 24
[ 617.005930] Buffer I/O error on device sdc, logical block 3
[ 617.117941] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.360320] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.603694] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.847076] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.092714] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.333833] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.470174] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 618.470188] end_request: I/O error, dev sdc, sector 24
[ 618.470195] Buffer I/O error on device sdc, logical block 3
[ 618.581203] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.824594] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.067970] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.311344] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.554724] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.798108] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.930447] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 619.930459] end_request: I/O error, dev sdc, sector 0
[ 620.041492] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 620.288846] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 620.532235] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 620.779603] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.018999] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.266361] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.398698] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 621.398710] end_request: I/O error, dev sdc, sector 0
[ 621.398717] printk: 1 messages suppressed.
[ 621.398722] Buffer I/O error on device sdc, logical block 0
[ 621.398747] unable to read partition table
[ 621.399122] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 621.399196] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 621.525699] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.770311] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.016437] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.259814] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.507207] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.750578] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.825230] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 622.825237] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 622.886909] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 622.886923] end_request: I/O error, dev sdc, sector 0
[ 622.998975] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.241316] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.484704] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.728079] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.971464] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.214848] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.347177] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 624.347192] end_request: I/O error, dev sdc, sector 0
[ 624.474162] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.717547] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.960926] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.204305] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.451682] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.695061] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.827405] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 625.827417] end_request: I/O error, dev sdc, sector 0
[ 625.938437] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.182359] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.429189] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.672558] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.915936] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 627.163324] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 627.295659] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 627.295671] end_request: I/O error, dev sdc, sector 0
[ 627.295678] printk: 9 messages suppressed.
[ 627.295682] Buffer I/O error on device sdc, logical block 0
[ 628.944469] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 628.944479] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 630.091839] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 630.335216] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 630.578592] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 630.821978] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.065351] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.312726] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.445115] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 631.445151] end_request: I/O error, dev sdc, sector 0
[ 631.445159] Buffer I/O error on device sdc, logical block 0
[ 631.556105] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.799515] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.042874] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.286302] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.529627] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.773000] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.905383] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 632.905395] end_request: I/O error, dev sdc, sector 0
[ 639.908821] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 639.908828] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 641.250934] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 641.363084] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 641.606500] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 641.849834] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.093222] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.336591] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.579981] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.712323] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 642.712336] end_request: I/O error, dev sdc, sector 0
[ 642.712411] FAT: unable to read boot sector
[ 737.295472] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 737.295478] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 739.120533] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 739.120539] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 852.922125] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 852.922132] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 853.524989] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 853.524995] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 903.500622] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 903.500631] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1080.111945] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1080.111954] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1207.845061] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1207.845069] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1236.980681] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1236.980690] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1242.044528] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1242.287042] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1242.535527] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1242.779074] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1243.021516] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1243.265026] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1243.397443] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 1243.397455] end_request: I/O error, dev sdc, sector 0
[ 1243.397567] FAT: unable to read boot sector
[ 1422.243592] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1422.243601] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1424.861690] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1424.861698] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1428.465736] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1428.465743] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1435.128079] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1435.128085] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1441.074540] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1441.074546] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1496.571007] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1496.571015] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1497.243466] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1497.243475] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
I even rebuilt my kernel with EFI disabled but with no luck.
Trying to mount the Ipod results in the following:
mount: /dev/sdc: can't read superblock
ANY HELP???
dmesg returns the following:
[ 117.527687] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 117.771046] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.014420] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.257802] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.390109] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 118.390120] end_request: I/O error, dev sdc, sector 0
[ 118.390128] Buffer I/O error on device sdc, logical block 0
[ 118.390152] Dev sdc: unable to read RDB block 0
[ 118.501179] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.744560] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 118.987941] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.231327] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.474828] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.718077] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 119.850389] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 119.850399] end_request: I/O error, dev sdc, sector 0
[ 119.850404] Buffer I/O error on device sdc, logical block 0
[ 119.961452] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.204835] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.226318] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 120.226323] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 120.448213] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.691592] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 120.938973] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.178362] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.310655] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 121.310665] end_request: I/O error, dev sdc, sector 0
[ 121.310673] Buffer I/O error on device sdc, logical block 0
[ 121.421764] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.582651] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 121.582657] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 121.669105] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 121.908493] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.151873] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.395249] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.638628] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 122.770927] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 122.770938] end_request: I/O error, dev sdc, sector 24
[ 122.770947] Buffer I/O error on device sdc, logical block 3
[ 122.882018] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.125389] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.368770] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.612142] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 123.855531] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.098896] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.231198] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 124.231209] end_request: I/O error, dev sdc, sector 24
[ 124.231218] Buffer I/O error on device sdc, logical block 3
[ 124.342278] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.585657] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 124.829036] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.072413] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.315843] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.559168] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 125.691469] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 125.691480] end_request: I/O error, dev sdc, sector 0
[ 125.802552] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.045932] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.293298] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.536682] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 126.720894] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 126.720901] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 126.780059] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.023436] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.159722] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 127.159734] end_request: I/O error, dev sdc, sector 0
[ 127.159740] printk: 1 messages suppressed.
[ 127.159744] Buffer I/O error on device sdc, logical block 0
[ 127.159768] unable to read partition table
[ 127.160143] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 127.160217] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 127.298749] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.542122] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 127.785493] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.032863] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.276240] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.519632] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 128.655913] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 128.655926] end_request: I/O error, dev sdc, sector 0
[ 128.766997] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.010367] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.253747] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.497123] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.740507] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 129.987882] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.120179] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 130.120190] end_request: I/O error, dev sdc, sector 0
[ 130.247210] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.490591] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.733976] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 130.977353] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.220731] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.464105] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.596407] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 131.596416] end_request: I/O error, dev sdc, sector 0
[ 131.640159] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 131.640167] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 131.707524] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 131.950861] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.194244] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.437619] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.681002] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 132.924379] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 133.056683] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 133.056692] end_request: I/O error, dev sdc, sector 0
[ 133.056723] printk: 9 messages suppressed.
[ 133.056727] Buffer I/O error on device sdc, logical block 0
[ 135.358183] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 135.601577] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 135.844930] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.088312] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.335807] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.580067] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 136.712603] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 136.712616] end_request: I/O error, dev sdc, sector 0
[ 136.712623] Buffer I/O error on device sdc, logical block 0
[ 136.822431] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.065810] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.309192] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.552570] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 137.795949] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 138.039330] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 138.171624] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 138.171633] end_request: I/O error, dev sdc, sector 0
[ 141.275939] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 141.275946] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 151.954912] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 151.954918] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 153.763044] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 153.874923] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.118311] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.361681] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.605056] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 154.852454] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.099803] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.343177] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.590551] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 155.829935] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 156.073310] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 156.205622] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 156.205633] end_request: I/O error, dev sdc, sector 4
[ 156.205675] FAT: bread failed, FSINFO block (sector = 1)
[ 288.952782] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 288.952789] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 320.321064] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 320.321071] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 500.028463] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 500.028470] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 572.968700] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 572.968707] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 575.917321] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 575.917327] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 576.502468] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 576.612307] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 576.855681] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.099054] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.342435] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.585813] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.833183] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 577.966477] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 577.966489] end_request: I/O error, dev sdc, sector 0
[ 577.966555] FAT: unable to read boot sector
[ 584.467874] usb 5-7: USB disconnect, address 4
[ 593.828370] usb 5-8: new high speed USB device using ehci_hcd and address 5
[ 593.961373] usb 5-8: configuration #1 chosen from 2 choices
[ 593.961938] scsi3 : SCSI emulation for USB Mass Storage devices
[ 593.962318] usb-storage: device found at 5
[ 593.962323] usb-storage: waiting for device to settle before scanning
[ 598.947482] usb-storage: device scan complete
[ 598.948017] scsi 3:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2
[ 598.949961] sd 3:0:0:0: [sdc] 991232 2048-byte hardware sectors (2030 MB)
[ 599.063036] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 599.191924] sd 3:0:0:0: [sdc] Write Protect is off
[ 599.191933] sd 3:0:0:0: [sdc] Mode Sense: 64 00 00 08
[ 599.191940] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 599.194031] sd 3:0:0:0: [sdc] 991232 2048-byte hardware sectors (2030 MB)
[ 599.302419] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 599.435261] sd 3:0:0:0: [sdc] Write Protect is off
[ 599.435270] sd 3:0:0:0: [sdc] Mode Sense: 64 00 00 08
[ 599.435276] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 599.435287] sdc:<6>usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 599.793145] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.036533] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.279913] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.523299] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.766684] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 600.900022] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 600.900037] end_request: I/O error, dev sdc, sector 0
[ 600.900042] printk: 4 messages suppressed.
[ 600.900046] Buffer I/O error on device sdc, logical block 0
[ 601.010037] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.257415] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.504785] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.748160] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 601.991535] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.234914] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.367275] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 602.367289] end_request: I/O error, dev sdc, sector 0
[ 602.367296] Buffer I/O error on device sdc, logical block 0
[ 602.478287] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.722666] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 602.965045] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.208684] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.451812] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.695185] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 603.827549] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 603.827585] end_request: I/O error, dev sdc, sector 0
[ 603.827593] Buffer I/O error on device sdc, logical block 0
[ 603.939570] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.181947] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.425339] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.671244] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 604.912090] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.159457] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.291933] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 605.291945] end_request: I/O error, dev sdc, sector 0
[ 605.291953] Buffer I/O error on device sdc, logical block 0
[ 605.403829] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.650211] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 605.893586] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.136965] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.384330] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.627704] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 606.760064] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 606.760077] end_request: I/O error, dev sdc, sector 0
[ 606.760086] Buffer I/O error on device sdc, logical block 0
[ 606.760112] ldm_validate_partition_table(): Disk read failed.
[ 606.871083] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.114472] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.359755] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.601242] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 607.844600] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.091976] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.224327] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 608.224339] end_request: I/O error, dev sdc, sector 0
[ 608.224347] Buffer I/O error on device sdc, logical block 0
[ 608.335341] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.578737] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 608.822113] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.065482] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.308860] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.552252] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 609.685599] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 609.685612] end_request: I/O error, dev sdc, sector 0
[ 609.685618] Buffer I/O error on device sdc, logical block 0
[ 609.795629] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.042997] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.286754] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.529752] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 610.773136] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.016515] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.152853] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 611.152868] end_request: I/O error, dev sdc, sector 0
[ 611.152875] Buffer I/O error on device sdc, logical block 0
[ 611.263877] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.507263] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.754637] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 611.998011] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.241374] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.484769] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.617115] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 612.617129] end_request: I/O error, dev sdc, sector 0
[ 612.617136] Buffer I/O error on device sdc, logical block 0
[ 612.617162] Dev sdc: unable to read RDB block 0
[ 612.728145] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 612.971540] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.214904] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.458286] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.701656] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 613.945042] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.077383] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 614.077395] end_request: I/O error, dev sdc, sector 0
[ 614.077403] Buffer I/O error on device sdc, logical block 0
[ 614.188414] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.431802] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.675172] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 614.918556] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.165924] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.409297] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.541648] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 615.541660] end_request: I/O error, dev sdc, sector 0
[ 615.541669] Buffer I/O error on device sdc, logical block 0
[ 615.652676] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 615.896056] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.139446] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.386805] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.630194] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 616.873567] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.005910] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 617.005922] end_request: I/O error, dev sdc, sector 24
[ 617.005930] Buffer I/O error on device sdc, logical block 3
[ 617.117941] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.360320] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.603694] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 617.847076] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.092714] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.333833] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.470174] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 618.470188] end_request: I/O error, dev sdc, sector 24
[ 618.470195] Buffer I/O error on device sdc, logical block 3
[ 618.581203] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 618.824594] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.067970] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.311344] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.554724] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.798108] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 619.930447] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 619.930459] end_request: I/O error, dev sdc, sector 0
[ 620.041492] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 620.288846] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 620.532235] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 620.779603] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.018999] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.266361] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.398698] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 621.398710] end_request: I/O error, dev sdc, sector 0
[ 621.398717] printk: 1 messages suppressed.
[ 621.398722] Buffer I/O error on device sdc, logical block 0
[ 621.398747] unable to read partition table
[ 621.399122] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 621.399196] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 621.525699] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 621.770311] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.016437] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.259814] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.507207] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.750578] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 622.825230] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 622.825237] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 622.886909] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 622.886923] end_request: I/O error, dev sdc, sector 0
[ 622.998975] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.241316] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.484704] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.728079] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 623.971464] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.214848] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.347177] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 624.347192] end_request: I/O error, dev sdc, sector 0
[ 624.474162] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.717547] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 624.960926] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.204305] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.451682] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.695061] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 625.827405] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 625.827417] end_request: I/O error, dev sdc, sector 0
[ 625.938437] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.182359] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.429189] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.672558] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 626.915936] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 627.163324] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 627.295659] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 627.295671] end_request: I/O error, dev sdc, sector 0
[ 627.295678] printk: 9 messages suppressed.
[ 627.295682] Buffer I/O error on device sdc, logical block 0
[ 628.944469] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 628.944479] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 630.091839] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 630.335216] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 630.578592] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 630.821978] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.065351] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.312726] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.445115] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 631.445151] end_request: I/O error, dev sdc, sector 0
[ 631.445159] Buffer I/O error on device sdc, logical block 0
[ 631.556105] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 631.799515] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.042874] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.286302] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.529627] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.773000] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 632.905383] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 632.905395] end_request: I/O error, dev sdc, sector 0
[ 639.908821] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 639.908828] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 641.250934] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 641.363084] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 641.606500] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 641.849834] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.093222] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.336591] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.579981] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 642.712323] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 642.712336] end_request: I/O error, dev sdc, sector 0
[ 642.712411] FAT: unable to read boot sector
[ 737.295472] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 737.295478] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 739.120533] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 739.120539] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 852.922125] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 852.922132] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 853.524989] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 853.524995] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 903.500622] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 903.500631] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1080.111945] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1080.111954] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1207.845061] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1207.845069] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1236.980681] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1236.980690] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1242.044528] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1242.287042] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1242.535527] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1242.779074] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1243.021516] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1243.265026] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 1243.397443] sd 3:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 1243.397455] end_request: I/O error, dev sdc, sector 0
[ 1243.397567] FAT: unable to read boot sector
[ 1422.243592] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1422.243601] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1424.861690] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1424.861698] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1428.465736] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1428.465743] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1435.128079] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1435.128085] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1441.074540] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1441.074546] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1496.571007] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1496.571015] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1497.243466] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1497.243475] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
I even rebuilt my kernel with EFI disabled but with no luck.
Trying to mount the Ipod results in the following:
mount: /dev/sdc: can't read superblock
ANY HELP???