[ubuntu] Vodafone 3g modem card [Archive]

fm-1

June 11th, 2008, 08:12 AM

Vodafone

HUAWEI Mobile connect model : E630

Can you plugin the device and then boot up Linux. After that run Applications -> Accessories -> Terminal and enter the command

Code:

dmesg

[ 0.000000] ACPI: MCFG 3F7E5A00, 003C (r1 HP 30AA 1 HP 1)
[ 0.000000] ACPI: TCPA 3F7E5A3C, 0032 (r2 HP 30AA 1 HP 1)
[ 0.000000] ACPI: SSDT 3F7F5078, 033A (r1 HP HPQPAT 1 MSFT 100000E)
[ 0.000000] ACPI: SSDT 3F7F53B2, 01DB (r1 HP Cpu0Cst 3001 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F7F558D, 04E7 (r1 HP CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
[ 0.000000] Built 1 zonelists. Total pages: 258017
[ 0.000000] Kernel command line: root=UUID=556f26d4-4e0b-40e8-b6a6-53b3c0142fc3 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.138 MHz processor.
[ 12.218783] Console: colour VGA+ 80x25
[ 12.219079] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 12.219481] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.252213] Memory: 1019308k/1040192k available (2015k kernel code, 20152k reserved, 916k data, 364k init, 122688k highmem)
[ 12.252222] virtual kernel memory layout:
[ 12.252224] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 12.252225] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.252226] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 12.252228] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 12.252229] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 12.252230] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 12.252231] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 12.252235] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.252275] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 12.332276] Calibrating delay using timer specific routine.. 3462.11 BogoMIPS (lpj=6924239)
[ 12.332306] Security Framework v1.0.0 initialized
[ 12.332316] SELinux: Disabled at boot.
[ 12.332330] Mount-cache hash table entries: 512
[ 12.332465] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000
[ 12.332475] monitor/mwait feature present.
[ 12.332477] using mwait in idle threads.
[ 12.332482] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 12.332484] CPU: L2 cache: 1024K
[ 12.332487] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c109 00000000 00000000
[ 12.332498] Compat vDSO mapped to ffffe000.
[ 12.332511] Checking 'hlt' instruction... OK.
[ 12.348403] SMP alternatives: switching to UP code
[ 12.348636] Freeing SMP alternatives: 11k freed
[ 12.348930] Early unpacking initramfs... done
[ 12.697539] ACPI: Core revision 20070126
[ 12.697661] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 12.773391] CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 08
[ 12.773420] Total of 1 processors activated (3462.11 BogoMIPS).
[ 12.773616] ENABLING IO-APIC IRQs
[ 12.773822] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 12.920116] Brought up 1 CPUs
[ 12.920223] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 12.920226] Booting paravirtualized kernel on bare hardware
[ 12.920315] Time: 19:54:33 Date: 05/10/108
[ 12.920337] NET: Registered protocol family 16
[ 12.920421] EISA bus registered
[ 12.920439] ACPI: bus type pci registered
[ 12.921662] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=8
[ 12.921664] PCI: Using configuration type 1
[ 12.921666] Setting up standard PCI resources
[ 12.923354] ACPI: EC: Look up EC in DSDT
[ 12.923971] ACPI: EC: GPE=0x16, ports=0x66, 0x62
[ 12.952003] ACPI: Interpreter enabled
[ 12.952007] ACPI: (supports S0 S3 S4 S5)
[ 12.952021] ACPI: Using IOAPIC for interrupt routing
[ 12.961700] ACPI: EC: GPE=0x16, ports=0x66, 0x62
[ 12.961769] ACPI: PCI Root Bridge [C002] (0000:00)
[ 12.961782] PCI: Probing PCI hardware (bus 00)
[ 12.962470] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 12.962475] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[ 12.963191] PCI: Transparent bridge - 0000:00:1e.0
[ 12.963301] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[ 12.963634] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C092._PRT]
[ 12.963797] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0FB._PRT]
[ 12.995439] ACPI: PCI Interrupt Link [C107] (IRQs 10 *11)
[ 12.995666] ACPI: PCI Interrupt Link [C108] (IRQs 10 *11)
[ 12.995891] ACPI: PCI Interrupt Link [C109] (IRQs *10 11)
[ 12.996117] ACPI: PCI Interrupt Link [C10A] (IRQs *10 11)
[ 12.996342] ACPI: PCI Interrupt Link [C123] (IRQs *10 11)
[ 12.996566] ACPI: PCI Interrupt Link [C124] (IRQs 10 *11)
[ 12.996782] ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
[ 12.996890] ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
[ 12.997100] ACPI: Power Resource [C20F] (on)
[ 12.997153] ACPI: Power Resource [C217] (off)
[ 12.997272] ACPI: Power Resource [C311] (off)
[ 12.997380] ACPI: Power Resource [C312] (off)
[ 12.997486] ACPI: Power Resource [C313] (off)
[ 12.997592] ACPI: Power Resource [C314] (off)
[ 12.997605] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.997617] pnp: PnP ACPI init
[ 12.997625] ACPI: bus type pnp registered
[ 13.005289] pnp: PnP ACPI: found 11 devices
[ 13.005292] ACPI: ACPI bus type pnp unregistered
[ 13.005296] PnPBIOS: Disabled by ACPI PNP
[ 13.005344] PCI: Using ACPI for IRQ routing
[ 13.005347] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.068667] NET: Registered protocol family 8
[ 13.068671] NET: Registered protocol family 20
[ 13.068727] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 13.068730] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 13.068734] pnp: 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[ 13.068742] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 13.068745] pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 13.068751] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 13.068754] pnp: 00:09: ioport range 0x1000-0x107f has been reserved
[ 13.068757] pnp: 00:09: ioport range 0x1100-0x113f has been reserved
[ 13.068760] pnp: 00:09: ioport range 0x1200-0x121f has been reserved
[ 13.068763] pnp: 00:09: iomem range 0xf8000000-0xfbffffff has been reserved
[ 13.068767] pnp: 00:09: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 13.068770] pnp: 00:09: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 13.068773] pnp: 00:09: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 13.068778] pnp: 00:0a: iomem range 0xfeda0000-0xfedbffff could not be reserved
[ 13.068781] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 13.072024] Time: tsc clocksource has been installed.
[ 13.099061] PCI: Bridge: 0000:00:1c.0
[ 13.099062] IO window: disabled.
[ 13.099069] MEM window: e8000000-e80fffff
[ 13.099073] PREFETCH window: disabled.
[ 13.099081] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 13.099084] IO window: 00002000-000020ff
[ 13.099089] IO window: 00002400-000024ff
[ 13.099095] PREFETCH window: 40000000-43ffffff
[ 13.099100] MEM window: 44000000-47ffffff
[ 13.099106] PCI: Bridge: 0000:00:1e.0
[ 13.099109] IO window: 2000-2fff
[ 13.099115] MEM window: e8100000-e83fffff
[ 13.099120] PREFETCH window: 40000000-43ffffff
[ 13.099152] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.099159] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.099173] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.099191] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 13.099207] NET: Registered protocol family 2
[ 13.136030] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.136107] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 13.137366] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.137764] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.137768] TCP reno registered
[ 13.148144] checking if image is initramfs... it is
[ 13.599839] Switched to high resolution mode on CPU 0
[ 13.836802] Freeing initrd memory: 7349k freed
[ 13.837246] audit: initializing netlink socket (disabled)
[ 13.837260] audit(1213127673.148:1): initialized
[ 13.837330] highmem bounce pool size: 64 pages
[ 13.839101] VFS: Disk quotas dquot_6.5.1
[ 13.839150] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.839238] io scheduler noop registered
[ 13.839240] io scheduler anticipatory registered
[ 13.839243] io scheduler deadline registered
[ 13.839258] io scheduler cfq registered (default)
[ 13.839271] Boot video device is 0000:00:02.0
[ 13.839437] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.839494] assign_interrupt_mode Found MSI capability
[ 13.839498] Allocate Port Service[0000:00:1c.0:pcie00]
[ 13.839529] Allocate Port Service[0000:00:1c.0:pcie02]
[ 13.839679] isapnp: Scanning for PnP cards...
[ 14.193885] isapnp: No Plug & Play device found
[ 14.217638] Real Time Clock Driver v1.12ac
[ 14.217755] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.218905] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.219089] input: Macintosh mouse button emulation as /class/input/input0
[ 14.219163] PNP: PS/2 Controller [PNP0303:C20C,PNP0f13:C20D] at 0x60,0x64 irq 1,12
[ 14.221647] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 14.222454] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.222460] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 14.222463] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 14.222465] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 14.222468] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 14.222673] mice: PS/2 mouse device common for all mice
[ 14.222864] EISA: Probing bus 0 at eisa.0
[ 14.222872] Cannot allocate resource for EISA slot 1
[ 14.222875] Cannot allocate resource for EISA slot 2
[ 14.222889] Cannot allocate resource for EISA slot 6
[ 14.222899] EISA: Detected 0 cards.
[ 14.222999] TCP cubic registered
[ 14.223014] NET: Registered protocol family 1
[ 14.223038] Using IPI No-Shortcut mode
[ 14.223261] Magic number: 12:656:950
[ 14.223286] hash matches device ttya5
[ 14.223433] hash matches device tty7
[ 14.223635] Freeing unused kernel memory: 364k freed
[ 14.295935] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.432758] AppArmor: AppArmor initialized<5>audit(1213127674.648:2): type=1505 info="AppArmor initialized" pid=1239
[ 15.438496] fuse init (API version 7.8)
[ 15.442819] Failure registering capabilities with primary security module.
[ 15.446540] ACPI: Transitioning device [C315] to D3
[ 15.446543] ACPI: Transitioning device [C315] to D3
[ 15.446547] ACPI: Fan [C315] (off)
[ 15.446754] ACPI: Transitioning device [C316] to D3
[ 15.446756] ACPI: Transitioning device [C316] to D3
[ 15.446759] ACPI: Fan [C316] (off)
[ 15.446963] ACPI: Transitioning device [C317] to D3
[ 15.446965] ACPI: Transitioning device [C317] to D3
[ 15.446970] ACPI: Fan [C317] (off)
[ 15.447190] ACPI: Transitioning device [C318] to D3
[ 15.447192] ACPI: Transitioning device [C318] to D3
[ 15.447195] ACPI: Fan [C318] (off)
[ 15.455875] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 15.455881] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.455894] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 3.056000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.056000] ACPI: Thermal Zone [TZ0] (52 C)
[ 3.060000] Time: acpi_pm clocksource has been installed.
[ 3.072000] ACPI: Thermal Zone [TZ1] (47 C)
[ 3.084000] ACPI: Thermal Zone [TZ2] (40 C)
[ 3.096000] ACPI: Thermal Zone [TZ3] (23 C)
[ 3.096000] ACPI: Thermal Zone [TZ4] (20 C)
[ 3.584000] usbcore: registered new interface driver usbfs
[ 3.584000] usbcore: registered new interface driver hub
[ 3.584000] usbcore: registered new device driver usb
[ 3.584000] USB Universal Host Controller Interface driver v3.0
[ 3.584000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 3.584000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.584000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.584000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.584000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006020
[ 3.584000] usb usb1: configuration #1 chosen from 1 choice
[ 3.584000] hub 1-0:1.0: USB hub found
[ 3.584000] hub 1-0:1.0: 2 ports detected
[ 3.688000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19
[ 3.688000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.688000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.688000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.688000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006040
[ 3.688000] usb usb2: configuration #1 chosen from 1 choice
[ 3.688000] hub 2-0:1.0: USB hub found
[ 3.688000] hub 2-0:1.0: 2 ports detected
[ 3.696000] SCSI subsystem initialized
[ 3.700000] libata version 2.21 loaded.
[ 3.792000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 3.792000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.792000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.792000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.792000] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00006060
[ 3.792000] usb usb3: configuration #1 chosen from 1 choice
[ 3.792000] hub 3-0:1.0: USB hub found
[ 3.792000] hub 3-0:1.0: 2 ports detected
[ 3.896000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
[ 3.896000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.896000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.896000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.896000] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00006080
[ 3.896000] usb usb4: configuration #1 chosen from 1 choice
[ 3.896000] hub 4-0:1.0: USB hub found
[ 3.896000] hub 4-0:1.0: 2 ports detected
[ 4.000000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
[ 4.000000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.000000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.000000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.000000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.000000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.000000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe8584000
[ 4.004000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.004000] usb usb5: configuration #1 chosen from 1 choice
[ 4.004000] hub 5-0:1.0: USB hub found
[ 4.004000] hub 5-0:1.0: 8 ports detected
[ 4.108000] ata_piix 0000:00:1f.2: version 2.11
[ 4.108000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.108000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 21
[ 4.108000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.108000] scsi0 : ata_piix
[ 4.108000] scsi1 : ata_piix
[ 4.108000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000160a0 irq 14
[ 4.108000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000160a8 irq 15
[ 4.172000] Clocksource tsc unstable (delta = -152082446 ns)
[ 4.272000] ata1.00: ATA-7: ST96812AS, 7.24, max UDMA/100
[ 4.272000] ata1.00: 117231408 sectors, multi 16: LBA48
[ 4.288000] ata1.00: configured for UDMA/100
[ 4.624000] ata2.00: ATAPI: TSSTcorpCDW/DVD TS-L462C, HP10, max MWDMA2
[ 4.828000] ata2.00: configured for MWDMA2
[ 4.828000] scsi 0:0:0:0: Direct-Access ATA ST96812AS 7.24 PQ: 0 ANSI: 5
[ 4.848000] scsi 1:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462C HP10 PQ: 0 ANSI: 5
[ 4.848000] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 4.900000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[e8101000-e81017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.900000] b44.c:v1.01 (Jun 16, 2006)
[ 4.900000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.904000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:17:08:47:de:54
[ 4.916000] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
[ 4.916000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.916000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.916000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.920000] sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
[ 4.920000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.920000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.920000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.920000] sda: sda1 sda2 sda3 < sda5 >
[ 5.020000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.024000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.024000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.156000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 5.156000] Uniform CD-ROM driver Revision: 3.20
[ 5.156000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.348000] Attempting manual resume
[ 5.348000] swsusp: Resume From Partition 8:5
[ 5.348000] PM: Checking swsusp image.
[ 5.348000] PM: Resume from disk failed.
[ 5.388000] kjournald starting. Commit interval 5 seconds
[ 5.388000] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.420000] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.460000] agpgart: Detected an Intel 945GM Chipset.
[ 13.460000] agpgart: Detected 7932K stolen memory.
[ 13.476000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 13.572000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.580000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.284000] iTCO_vendor_support: vendor-support=0
[ 14.284000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 14.284000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 14.284000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.300000] intel_rng: FWH not detected
[ 14.640000] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30aa]
[ 14.640000] Yenta: Enabling burst memory read transactions
[ 14.640000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 14.640000] Yenta: Routing CardBus interrupts to PCI
[ 14.640000] Yenta TI: socket 0000:02:06.0, mfunc 0x01a61b22, devctl 0x64
[ 14.736000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
[ 14.736000] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 14.776000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 14.872000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 14.872000] Socket status: 30000820
[ 14.872000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 14.872000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 14.872000] cs: IO port probe 0x2000-0x2fff: clean.
[ 14.872000] pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff
[ 14.872000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 14.904000] input: PC Speaker as /class/input/input3
[ 14.920000] ieee80211_crypt: registered algorithm 'NULL'
[ 14.920000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 14.920000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 14.972000] bcm43xx driver
[ 14.972000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.972000] PCI: Setting latency timer of device 0000:08:00.0 to 64
[ 15.424000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 15.424000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.508000] pccard: CardBus card inserted into slot 0
[ 15.548000] cs: IO port probe 0x100-0x3af: clean.
[ 15.552000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 15.552000] cs: IO port probe 0x820-0x8ff: clean.
[ 15.552000] cs: IO port probe 0xc00-0xcf7: clean.
[ 15.552000] cs: IO port probe 0xa00-0xaff: clean.
[ 15.592000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.336000] si3054: cannot initialize. EXT MID = 0000
[ 16.356000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[ 16.356000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 16.356000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 16.356000] ohci_hcd 0000:03:00.0: OHCI Host Controller
[ 16.356000] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 16.356000] ohci_hcd 0000:03:00.0: irq 17, io mem 0x44000000
[ 16.440000] usb usb6: configuration #1 chosen from 1 choice
[ 16.440000] hub 6-0:1.0: USB hub found
[ 16.440000] hub 6-0:1.0: 1 port detected
[ 16.544000] PCI: Enabling device 0000:03:00.1 (0000 -> 0002)
[ 16.544000] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 18 (level, low) -> IRQ 17
[ 16.544000] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 16.544000] ohci_hcd 0000:03:00.1: OHCI Host Controller
[ 16.544000] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
[ 16.544000] ohci_hcd 0000:03:00.1: irq 17, io mem 0x44001000
[ 16.628000] usb usb7: configuration #1 chosen from 1 choice
[ 16.628000] hub 7-0:1.0: USB hub found
[ 16.628000] hub 7-0:1.0: 1 port detected
[ 17.128000] lp: driver loaded but no devices found
[ 17.184000] Adding 1188768k swap on /dev/sda5. Priority:-1 extents:1 across:1188768k
[ 17.596000] EXT3 FS on sda2, internal journal
[ 18.364000] usb 6-1: new full speed USB device using ohci_hcd and address 2
[ 18.576000] usb 6-1: configuration #1 chosen from 1 choice
[ 18.736000] usbcore: registered new interface driver usbserial
[ 18.736000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 18.736000] usbcore: registered new interface driver usbserial_generic
[ 18.736000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 18.744000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
[ 18.744000] option 6-1:1.0: GSM modem (1-port) converter detected
[ 18.744000] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 18.744000] option 6-1:1.1: GSM modem (1-port) converter detected
[ 18.744000] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 18.744000] option 6-1:1.2: GSM modem (1-port) converter detected
[ 18.744000] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 18.744000] usbcore: registered new interface driver option
[ 18.744000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
[ 18.760000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
[ 18.764000] usbcore: registered new interface driver pl2303
[ 18.764000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
[ 18.864000] ACPI: Battery Slot [C1B5] (battery present)
[ 18.864000] ACPI: Battery Slot [C1B4] (battery absent)
[ 18.924000] ACPI: AC Adapter [C1B3] (on-line)
[ 18.940000] No dock devices found.
[ 18.984000] ACPI: Video Device [C07F] (multi-head: yes rom: no post: no)
[ 19.084000] input: Power Button (FF) as /class/input/input4
[ 19.084000] ACPI: Power Button (FF) [PWRF]
[ 19.104000] input: Sleep Button (CM) as /class/input/input5
[ 19.104000] ACPI: Sleep Button (CM) [C235]
[ 19.116000] input: Lid Switch as /class/input/input6
[ 19.116000] ACPI: Lid Switch [C22E]
[ 20.456000] ppdev: user-space parallel port driver
[ 20.488000] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
[ 21.200000] audit(1213120494.062:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4789 profile="/usr/sbin/cupsd"
[ 21.276000] apm: BIOS not found.
[ 21.544000] Failure registering capabilities with primary security module.
[ 21.712000] Bluetooth: Core ver 2.11
[ 21.712000] NET: Registered protocol family 31
[ 21.712000] Bluetooth: HCI device and connection manager initialized
[ 21.712000] Bluetooth: HCI socket layer initialized
[ 21.732000] Bluetooth: L2CAP ver 2.8
[ 21.732000] Bluetooth: L2CAP socket layer initialized
[ 21.816000] Bluetooth: RFCOMM socket layer initialized
[ 21.816000] Bluetooth: RFCOMM TTY layer initialized
[ 21.816000] Bluetooth: RFCOMM ver 1.8
[ 25.608000] [drm] Initialized drm 1.1.0 20060810
[ 25.612000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 25.616000] [drm] Initialized i915 1.6.0 20060119 on minor 0

Look at the various messages printed on the screen and let us know if there is a section that describes your modem and which device node it is attached (post this info back). Also post back the ouput of running

Code:

lsusb
lusb output

Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 12d1:1001
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

http://i191.photobucket.com/albums/z219/fawaazm/Screenshot.png