thumger
June 4th, 2008, 07:16 AM
Hi, I'm trying to install Ubuntu Server 8.04 on a PowerEdge 650. During the install, no disks are found and I'm presented with a list of drivers to load manually. I've tried many of them, including MegaRAID.* and aacraid - but no joy.
The box has two IDE disks setup as RAID1. During boot-up the controller is shown as: PERC/CERC ATA100/4ch
'lspci' shows the card as "RAID bus controller: American Megatrends Inc. MegaRAID (rev02)".
Before I dump the RAID controller and plug the two disks into the onboard IDE controller (and use s/w RAID), any ideas on how to get RAID the card working?
Thanks.
The box has two IDE disks setup as RAID1. During boot-up the controller is shown as: PERC/CERC ATA100/4ch
'lspci' shows the card as "RAID bus controller: American Megatrends Inc. MegaRAID (rev02)".
Before I dump the RAID controller and plug the two disks into the onboard IDE controller (and use s/w RAID), any ideas on how to get RAID the card working?
Thanks.