ouselesso
May 17th, 2008, 02:31 AM
I'm a little flustered about this. I'm running Gutsy 7.10, my video card is a Radeon X300 (PCIE).I've been trying for the last two days to set up my dual monitors. I've read many guides to help get an idea, most helpful was the link below
http://ubuntuforums.org/showthread.php?t=301941
So far I've amounted to getting nowhere fast. I've tried fresh install, I get my drivers installed fine
jgallios@jgallios-desktop:~$ fglrxinfo -display :0
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon X300/X550/X1050 Series
OpenGL version string: 2.1.7412 Release
My problem is when i try to run sudo aticonfig --query-monitor I get this
jgallios@jgallios-desktop:~$ sudo aticonfig --query-monitor
Connected monitors: none
Enabled monitors: none
Anyone have any idea to fix this? I'm tired of staring at a clone screens :(
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "fglrx"
Load "dri"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "DELL E228WFP"
Vendorname "Dell"
Modelname "Dell 1704FPT (Digital)"
Horizsync 30.0-81.0
Vertrefresh 56.0-76.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Boardname "ati"
Busid "PCI:1:0:0"
Driver "fglrx"
Screen 0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "DELL E228WFP"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1600 1200
Modes "1024x768@60" "1152x864@75" "1024x768@70" "1280x1024@75" "1024x768@75" "1280x960@60" "832x624@75" "1280x1024@60" "800x600@60" "1280x960@75" "800x600@75" "1400x1050@60" "800x600@72" "1600x1200@65" "800x600@56" "1600x1200@60" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "device" #
Identifier "device1"
Boardname "ATI Radeon (fglrx)"
Busid "PCI:1:0:1"
Driver "ati"
Screen 0
Vendorname "ATI"
Option "MergedFB" "off"
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
http://ubuntuforums.org/showthread.php?t=301941
So far I've amounted to getting nowhere fast. I've tried fresh install, I get my drivers installed fine
jgallios@jgallios-desktop:~$ fglrxinfo -display :0
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon X300/X550/X1050 Series
OpenGL version string: 2.1.7412 Release
My problem is when i try to run sudo aticonfig --query-monitor I get this
jgallios@jgallios-desktop:~$ sudo aticonfig --query-monitor
Connected monitors: none
Enabled monitors: none
Anyone have any idea to fix this? I'm tired of staring at a clone screens :(
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "fglrx"
Load "dri"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "DELL E228WFP"
Vendorname "Dell"
Modelname "Dell 1704FPT (Digital)"
Horizsync 30.0-81.0
Vertrefresh 56.0-76.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Boardname "ati"
Busid "PCI:1:0:0"
Driver "fglrx"
Screen 0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "DELL E228WFP"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1600 1200
Modes "1024x768@60" "1152x864@75" "1024x768@70" "1280x1024@75" "1024x768@75" "1280x960@60" "832x624@75" "1280x1024@60" "800x600@60" "1280x960@75" "800x600@75" "1400x1050@60" "800x600@72" "1600x1200@65" "800x600@56" "1600x1200@60" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "device" #
Identifier "device1"
Boardname "ATI Radeon (fglrx)"
Busid "PCI:1:0:1"
Driver "ati"
Screen 0
Vendorname "ATI"
Option "MergedFB" "off"
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection