max69
May 6th, 2008, 11:06 AM
Hello,
I've installed mythbuntu on my laptop but for the life of me I cannot get the TV-out to get properly. I would like to either use my laptop display and TV each in their respective resolution. If that is not possible or too complicated I would just like to use the TV only. At the moment when I boot with the tv plugged in I do not get anything on the TV and a weird desktop on the laptop with a XFCE wallpaper instead of mythbuntu on the whole of the screeen but the top panel stops at about 2/3 of the width of the screen. It is the same for fullscreen windows. My Xorg.conf file looks very weird with very little in it. I also got some info on my TV specs through my windows partition.
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
ntel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 05/06/2008
Report Time[hr:mm:ss]: 15:16:12
Driver Version: 6.14.10.4906
Operating System: Windows XP* Professional, Service Pack 3, v.3264 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 3061 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 128 MB
Graphics Memory in Use: 10 MB
Processor: x86 family 6 Model 15 Stepping 10
Processor Speed: 2193 MHZ
Vendor ID: 8086
Device ID: 2A02
Device Revision: 03
* Accelerator Information *
Accelerator in Use: Mobile Intel(R) 965 Express Chipset Family
Video BIOS: 1471.0
Current Graphics Mode: 1280 by 800 True Color (60 Hz)
* Devices Connected to the Graphics Accelerator *
Active Notebook Displays: 1
Non Active Televisions: 1
* Television *
Monitor Name: Generic Television
Display Type: Analog
Gamma Value: 1.0
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: Not Available
Vertical: Not Available
Monitor Supported Modes:
640 by 480 (60 Hz)
720 by 480 (60 Hz)
720 by 576 (60 Hz)
800 by 600 (60 Hz)
1024 by 768 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Not Supported
* Notebook *
Monitor Name: Plug and Play Monitor
Display Type: Digital
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: Not Available
Vertical: Not Available
Monitor Supported Modes:
1280 by 800 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Not Supported
Raw EDID:
00 ff ff ff ff ff ff 00 0e 14 15 14 00 00 00 00
29 11 01 03 80 21 15 78 0a 09 2d 9d 56 4f 90 27
21 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 ea 1a 00 80 50 20 0d 30 18 20
13 00 4b cf 10 00 00 19 00 00 00 0f 00 20 20 20
20 20 20 20 20 20 6e 05 0f 00 00 00 00 fe 00 43
50 54 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
00 43 4c 41 41 31 35 34 57 42 30 35 41 20 00 ba
* Other names and brands are the property of their respective owners.########################################### ###################
And my xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
My laptop is a Zepto Znote 6025wd with Mythbuntu hardy. The TV is a Philips 28pw6008/05.
Thanks in advance.
I've installed mythbuntu on my laptop but for the life of me I cannot get the TV-out to get properly. I would like to either use my laptop display and TV each in their respective resolution. If that is not possible or too complicated I would just like to use the TV only. At the moment when I boot with the tv plugged in I do not get anything on the TV and a weird desktop on the laptop with a XFCE wallpaper instead of mythbuntu on the whole of the screeen but the top panel stops at about 2/3 of the width of the screen. It is the same for fullscreen windows. My Xorg.conf file looks very weird with very little in it. I also got some info on my TV specs through my windows partition.
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
ntel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 05/06/2008
Report Time[hr:mm:ss]: 15:16:12
Driver Version: 6.14.10.4906
Operating System: Windows XP* Professional, Service Pack 3, v.3264 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 3061 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 128 MB
Graphics Memory in Use: 10 MB
Processor: x86 family 6 Model 15 Stepping 10
Processor Speed: 2193 MHZ
Vendor ID: 8086
Device ID: 2A02
Device Revision: 03
* Accelerator Information *
Accelerator in Use: Mobile Intel(R) 965 Express Chipset Family
Video BIOS: 1471.0
Current Graphics Mode: 1280 by 800 True Color (60 Hz)
* Devices Connected to the Graphics Accelerator *
Active Notebook Displays: 1
Non Active Televisions: 1
* Television *
Monitor Name: Generic Television
Display Type: Analog
Gamma Value: 1.0
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: Not Available
Vertical: Not Available
Monitor Supported Modes:
640 by 480 (60 Hz)
720 by 480 (60 Hz)
720 by 576 (60 Hz)
800 by 600 (60 Hz)
1024 by 768 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Not Supported
* Notebook *
Monitor Name: Plug and Play Monitor
Display Type: Digital
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: Not Available
Vertical: Not Available
Monitor Supported Modes:
1280 by 800 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Not Supported
Raw EDID:
00 ff ff ff ff ff ff 00 0e 14 15 14 00 00 00 00
29 11 01 03 80 21 15 78 0a 09 2d 9d 56 4f 90 27
21 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 ea 1a 00 80 50 20 0d 30 18 20
13 00 4b cf 10 00 00 19 00 00 00 0f 00 20 20 20
20 20 20 20 20 20 6e 05 0f 00 00 00 00 fe 00 43
50 54 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
00 43 4c 41 41 31 35 34 57 42 30 35 41 20 00 ba
* Other names and brands are the property of their respective owners.########################################### ###################
And my xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
My laptop is a Zepto Znote 6025wd with Mythbuntu hardy. The TV is a Philips 28pw6008/05.
Thanks in advance.