teddmeister2
April 27th, 2008, 10:09 PM
Please help. I need to know if my HDD is failing. Basically I have a really slow boot with the following over and over again in my dmesg:
[ 525.860000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 525.868000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 525.868000] ata1.00: configured for UDMA/66
[ 525.868000] ata1: EH complete
[ 555.868000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 555.868000] ata1.00: cmd c8/00:08:2a:ad:4b/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
[ 555.868000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 562.868000] ata1: port is slow to respond, please be patient (Status 0xd0)
[ 585.884000] ata1: port failed to respond (30 secs, Status 0xd0)
[ 585.884000] ata1: soft resetting port
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.348000] ata1.00: revalidation failed (errno=-2)
[ 586.348000] ata1: failed to recover some devices, retrying in 5 secs
[ 591.352000] ata1: soft resetting port
[ 591.908000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 591.916000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 591.916000] ata1.00: configured for UDMA/66
Then I get the following in dmesg as my computer decides to actually boot up:
[ 591.916000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 591.916000] sda: Current [descriptor]: sense key: Aborted Command
[ 591.916000] Additional sense: No additional sense information
[ 591.916000] Descriptor sense data with sense descriptors (in hex):
[ 591.916000] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 591.916000] 00 00 00 00
[ 591.916000] end_request: I/O error, dev sda, sector 139177258
[ 591.916000] ata1: EH complete
[ 591.948000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 591.948000] sda: Write Protect is off
[ 591.948000] sda: Mode Sense: 00 3a 00 00
[ 591.948000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 591.968000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 591.968000] sda: Write Protect is off
[ 591.968000] sda: Mode Sense: 00 3a 00 00
[ 591.968000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 598.080000] NET: Registered protocol family 10
[ 598.080000] lo: Disabled Privacy Extensions
Is this a hardware error? What is it? Do I have a hard drive or motherboard on the way out? If it's not a hardware error, what kind of error is it, and how can I fix it? Please help!
[ 525.860000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 525.868000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 525.868000] ata1.00: configured for UDMA/66
[ 525.868000] ata1: EH complete
[ 555.868000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 555.868000] ata1.00: cmd c8/00:08:2a:ad:4b/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
[ 555.868000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 562.868000] ata1: port is slow to respond, please be patient (Status 0xd0)
[ 585.884000] ata1: port failed to respond (30 secs, Status 0xd0)
[ 585.884000] ata1: soft resetting port
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.048000] ATA: abnormal status 0xD0 on port 0x000101f7
[ 586.348000] ata1.00: revalidation failed (errno=-2)
[ 586.348000] ata1: failed to recover some devices, retrying in 5 secs
[ 591.352000] ata1: soft resetting port
[ 591.908000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 591.916000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 591.916000] ata1.00: configured for UDMA/66
Then I get the following in dmesg as my computer decides to actually boot up:
[ 591.916000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 591.916000] sda: Current [descriptor]: sense key: Aborted Command
[ 591.916000] Additional sense: No additional sense information
[ 591.916000] Descriptor sense data with sense descriptors (in hex):
[ 591.916000] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 591.916000] 00 00 00 00
[ 591.916000] end_request: I/O error, dev sda, sector 139177258
[ 591.916000] ata1: EH complete
[ 591.948000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 591.948000] sda: Write Protect is off
[ 591.948000] sda: Mode Sense: 00 3a 00 00
[ 591.948000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 591.968000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 591.968000] sda: Write Protect is off
[ 591.968000] sda: Mode Sense: 00 3a 00 00
[ 591.968000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 598.080000] NET: Registered protocol family 10
[ 598.080000] lo: Disabled Privacy Extensions
Is this a hardware error? What is it? Do I have a hard drive or motherboard on the way out? If it's not a hardware error, what kind of error is it, and how can I fix it? Please help!