Getting conky to show CPU/mobo temp

[herbster]

Sensors output:

~$ sensors
coretemp-isa-0003
Adapter: ISA adapter
Core 3: +38.0°C (crit = +100.0°C)

coretemp-isa-0002
Adapter: ISA adapter
Core 2: +38.0°C (crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +39.0°C (crit = +100.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +39.0°C (crit = +100.0°C)

w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.13 V (min = +0.00 V, max = +1.74 V)
in1: +11.30 V (min = +8.18 V, max = +1.74 V) ALARM
AVCC: +3.28 V (min = +0.69 V, max = +0.43 V) ALARM
3VCC: +3.26 V (min = +0.40 V, max = +0.29 V) ALARM
in4: +1.65 V (min = +1.82 V, max = +0.30 V) ALARM
in5: +1.63 V (min = +0.00 V, max = +0.91 V) ALARM
in6: +5.22 V (min = +0.95 V, max = +4.92 V) ALARM
VSB: +3.28 V (min = +0.98 V, max = +3.52 V)
VBAT: +3.23 V (min = +3.94 V, max = +0.59 V) ALARM
Case Fan: 0 RPM (min = 421 RPM, div = 128) ALARM
CPU Fan: 2033 RPM (min = 37500 RPM, div = 4) ALARM
Aux Fan: 0 RPM (min = 958 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +31.0°C (high = +65.0°C, hyst = +50.0°C) sensor = thermistor
CPU Temp: +30.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUX Temp: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
~$

Relevant part of conky that was working on old computer:

${execi 5 sensors | grep -A 0 'temp1' | cut -c15-16}${color #e8e8e8}C
${color #ffffff}${execi 5 sensors | grep -A 0 'temp2' | cut -c15-16}

Thanks for any help :)

EDIT: Solved, just had to change "temp1" and "temp2" in conky to "CPU Temp" and "Sys Temp" respectively.