Ok as per the link you provided I tried "sudo apt-get install lirc" and it said I already have it installed and that is the latest version. I ran "irw" in terminal and get no response from pressing remote control buttons.
Here is the contents of the hardware.conf file located at /etc/lirc
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Snapstream X10 RF"
# Arguments which will be used when launching lircd
LIRCD_ARGS=""
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false
#Try to load appropriate kernel modules
LOAD_MODULES=true
# Run "lircd --driver=help" for a list of supported drivers.
DRIVER=""
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=""
MODULES="lirc_dev lirc_atiusb"
# Default configuration files for your hardware if any
LIRCD_CONF="atiusb/lircd.conf.atiusb"
LIRCMD_CONF=""
Here is the content of the lircd.conf file located at /etc/lirc
#
# this config file was automatically generated
# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004
#
# contributed by Paul Miller <pmiller9@users.sourceforge.net>
#
# brand: ATI Remote Wonder
# model no. of remote control: 5000015900A
# devices being controlled by this remote: ATI USB Receiver
#
# CHANNEL CODES
# To change your channel, hold the hand button down until the
# LED begins to blink. Then enter the channel number
# (1 through 16) and press the hand again.
#
# NOTE!! The lirc_atiusb driver now removes the channel code
# from key-codes (by default). This effectively outputs codes
# for remote channel 1. You can change this behavior by
# loading the module with unique=1. Type `modinfo lirc_atiusb`
# for details.
begin remote
name ATIUSB_5000015900A
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 139944
toggle_bit 0
begin codes
A 0x000000000000F500
B 0x000000000000F601
C 0x0000000000000E19
D 0x000000000000101B
E 0x0000000000001621
F 0x0000000000001823
TV 0x000000000000F803
DVD 0x000000000000F904
WEB 0x000000000000FA05
BOOK 0x000000000000FB06
HAND 0x000000000000FC07
POWER 0x000000000000F702
MOUSE_LEFT_BTN 0x0000000000006D78
MOUSE_RIGHT_BTN 0x000000000000717C
MOUSE_UP 0x0000000000006772
MOUSE_DOWN 0x0000000000006B76
MOUSE_LEFT 0x0000000000006C77
MOUSE_RIGHT 0x0000000000006B76
VOL_UP 0x000000000000FD08
VOL_DOWN 0x000000000000FE09
MUTE 0x000000000000FF0A
CH_UP 0x000000000000000B
CH_DOWN 0x000000000000010C
1 0x000000000000020D
2 0x000000000000030E
3 0x000000000000040F
4 0x0000000000000510
5 0x0000000000000611
6 0x0000000000000712
7 0x0000000000000813
8 0x0000000000000914
9 0x0000000000000A15
0 0x0000000000000C17
LIST 0x0000000000000B16
CHECK 0x0000000000000D18
UP 0x0000000000000F1A
DOWN 0x0000000000001722
LEFT 0x000000000000121D
RIGHT 0x000000000000141F
OK 0x000000000000131E
TIMER 0x000000000000111C
MAX 0x0000000000001520
REWIND 0x0000000000001924
PLAY 0x0000000000001A25
FFWD 0x0000000000001B26
REC 0x0000000000001C27
STOP 0x0000000000001D28
PAUSE 0x0000000000001E29
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003
#
# contributed by Jason Piterak
#
# brand: ATI
# model no. of remote control: 5000022000
#
# devices being controlled by this remote:
# MythTV PVR using knopmyth by Cecil and Dale at
# http://mysettopbox.tv
# Key map names are as per ATI's website:
# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html
# Feel free to change them as you see fit :-)
#
# NOTE: There are 16 channels for this remote; this file only
# supports one channel. See the GATOS project for information
# on how to change the channel. Not tested. Unknown channel.
#
# also reported by Jeffrey Barnhill to work with model 5000023600 while
# the dedicated section below did not work
begin remote
name ATIUSB_5000022000
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0000
gap 139891
toggle_bit 0
begin codes
a 0x000000000000C500
b 0x000000000000C601
power 0x000000000000C702
tv 0x000000000000C803
dvd 0x000000000000C904
web 0x000000000000CA05
media_library 0x000000000000CB06
drag 0x000000000000CC07
mouse-button_left 0x0000000000003D78
mouse-button_right 0x000000000000417C
mouse-up 0x0000000000003772
mouse-down 0x0000000000003873
mouse-left 0x0000000000003570
mouse-right 0x0000000000003671
mouse-left_up 0x0000000000003974
mouse-right_up 0x0000000000003A75
mouse-left_down 0x0000000000003C77
mouse-right_down 0x0000000000003B76
vol-up 0x000000000000CD08
vol-down 0x000000000000CE09
mute 0x000000000000CF0A
chan-up 0x000000000000D00B
chan-down 0x000000000000D10C
1 0x000000000000D20D
2 0x000000000000D30E
3 0x000000000000D40F
4 0x000000000000D510
5 0x000000000000D611
6 0x000000000000D712
7 0x000000000000D813
8 0x000000000000D914
9 0x000000000000DA15
0 0x000000000000DC17
dvd-root_menu 0x000000000000DB16
launch_setup 0x000000000000DD18
c 0x000000000000DE19
d 0x000000000000E01B
tv_on_demand 0x000000000000E11C
max_window 0x000000000000E520
cursor-up 0x000000000000DF1A
cursor-down 0x000000000000E722
cursor-left 0x000000000000E21D
cursor-right 0x000000000000E41F
ok 0x000000000000E31E
e 0x000000000000E621
f 0x000000000000E823
rewind 0x000000000000E924
play 0x000000000000EA25
fast_forward 0x000000000000EB26
record 0x000000000000EC27
stop 0x000000000000ED28
pause 0x000000000000EE29
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004
#
# contributed by Jurgen Kramer
#
# brand: ATI
# model no. of remote control: 5000023600
# devices being controlled by this remote: MythTV 0.14
#
# USB ID: 0bc7:0004
#
begin remote
name ATIUSB_5000023600
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 227972
min_repeat 4
toggle_bit 0
begin codes
1 0x000000000000920D
2 0x000000000000930E
3 0x000000000000940F
4 0x0000000000009510
5 0x0000000000009611
6 0x0000000000009712
7 0x0000000000009813
8 0x0000000000009914
9 0x0000000000009A15
a 0x0000000000008500
b 0x0000000000008601
power 0x0000000000008702
tv 0x0000000000008803
dvd 0x0000000000008904
web 0x0000000000008A05
media_library 0x0000000000008B06
drag 0x0000000000008C07
0 0x0000000000009C17
c 0x0000000000009E19
d 0x000000000000A01B
mute 0x0000000000008F0A
tv_on_demand 0x000000000000A11C
max_window 0x000000000000A520
e 0x000000000000A621
f 0x000000000000A823
ok 0x000000000000A31E
left 0x000000000000A21D
right 0x000000000000A41F
up 0x0000000000009F1A
down 0x000000000000A722
rewind 0x000000000000A924
play 0x000000000000AA25
forward 0x000000000000AB26
record 0x000000000000AC27
stop 0x000000000000AD28
pause 0x000000000000AE29
mouse_button_left 0x000000000000FD78
mouse_button_right 0x000000000000017C
vol-down 0x0000000000008E09
vol-up 0x0000000000008D08
chan-down 0x000000000000910C
chan-up 0x000000000000900B
mouse-up 0x000000000000F772
mouse-down 0x000000000000F873
mouse-left 0x000000000000F570
mouse-right 0x000000000000F671
mouse-left_up 0x000000000000F974
mouse-left_down 0x000000000000FC77
mouse-right_up 0x000000000000FA75
mouse-right_down 0x000000000000FB76
dvd-root_menu 0x0000000000009B16
launch_setup 0x0000000000009D18
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005
#
# contributed by Raphaël Doursenaud (rdoursenaud@free.fr)
#
# brand: Sapphire (ATI)
# model no. of remote control: 5000023600
# devices being controlled by this remote: xmms, tvtime
#
begin remote
name SAPPHIRE_ATIUSB_5000023600
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 227990
toggle_bit 0
begin codes
1 0x00000014E20D0000
2 0x00000014E30E0000
3 0x00000014E40F0000
4 0x00000014E5100000
5 0x00000014E6110000
6 0x00000014E7120000
7 0x00000014E8130000
8 0x00000014E9140000
9 0x00000014EA150000
a 0x00000014D5000000
b 0x00000014D6010000
power 0x00000014D7020000
tv 0x00000014D8030000
dvd 0x00000014D9040000
web 0x00000014DA050000
media_library 0x00000014DB060000
drag 0x00000014DC070000
0 0x00000014EC170000
c 0x00000014EE190000
d 0x00000014F01B0000
mute 0x00000014DF0A0000
tv_on_demand 0x00000014F11C0000
max_window 0x00000014F5200000
e 0x00000014F6210000
f 0x00000014F8230000
ok 0x00000014F31E0000
left 0x00000014F21D0000
right 0x00000014F41F0000
up 0x00000014EF1A0000
down 0x00000014F7220000
rewind 0x00000014F9240000
play 0x00000014FA250000
forward 0x00000014FB260000
record 0x00000014FC270000
stop 0x00000014FD280000
pause 0x00000014FE290000
mouse_button_left 0x000000144D780000
mouse_button_right 0x00000014517C0000
vol-down 0x00000014DE090000
vol-up 0x00000014DD080000
chan-down 0x00000014E10C0000
chan-up 0x00000014E00B0000
mouse-up 0x0000001447720000
mouse-down 0x0000001448730000
mouse-left 0x0000001445700000
mouse-right 0x0000001446710000
mouse-left_up 0x0000001449740000
mouse-left_down 0x000000144C770000
mouse-right_up 0x000000144A750000
mouse-right_down 0x000000144B760000
dvd-root_menu 0x00000014EB160000
launch_setup 0x00000014ED180000
end codes
end remote
# lircd.conf for X-10 Lola remote
#
# this config file was automatically generated
# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004
# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc
#
#
# brand: X-10 Lola
# model no. of remote control: UR89A
# devices being controlled by this remote: mythtv
#
begin remote
name X-10_Lola
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 219972
toggle_bit 0
begin codes
up 0x000000000000600B
down 0x000000000000610C
left 0x0000000000005D08
right 0x0000000000005E09
M 0x0000000000005F0A
1 0x000000000000620D
2 0x000000000000630E
3 0x000000000000640F
4 0x0000000000006510
5 0x0000000000006611
6 0x0000000000006712
7 0x0000000000006813
8 0x0000000000006914
9 0x0000000000006A15
0 0x0000000000006C17
a-d 0x0000000000006B16
a-b 0x0000000000006D18
pageup 0x000000000000711C
pagedown 0x0000000000007520
T 0x000000000000832E
E 0x000000000000842F
F 0x0000000000005C07
S 0x0000000000008530
scan- 0x000000000000802B
rew 0x0000000000007924
play 0x0000000000007A25
ff 0x0000000000007B26
scan+ 0x0000000000007F2A
rec 0x0000000000007C27
stop 0x0000000000007D28
pause 0x0000000000007E29
playlist 0x0000000000005601
playing 0x000000000000822D
enter 0x000000000000731E
eu 0x0000000000006F1A
ed 0x0000000000007722
el 0x000000000000721D
er 0x000000000000741F
alb 0x0000000000006E19
art 0x000000000000701B
gen 0x0000000000007621
trk 0x0000000000007823
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004
#
# contributed by Julien Damon
#
# brand: microapp6in1
# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184
# distributed in France
# model no. of remote control: 4184(UR86E)
# devices being controlled by this remote:
#
# sold by Pearl as Q-Sonic Master Remote 6in1 PC
#
begin remote
name microapp6in1
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 203993
toggle_bit 0
begin codes
num_1 0x00000020EE11820D
num_2 0x00000020EE11420D
num_3 0x00000020EE11C20D
num_4 0x00000020EE11220D
num_5 0x00000020EE11A20D
num_6 0x00000020EE11620D
num_7 0x00000020EE11E20D
num_8 0x00000020EE11120D
num_9 0x00000020EE11920D
num_0 0x00000020EE11020D
AV 0x00000020EE11BA05
ok 0x00000020EE11520D
up 0x00000020EE11D50A
left 0x00000020EE11D20D
right 0x00000020EE11D10E
down 0x00000020EE11D30C
exit 0x00000020EE11C906
menu 0x00000020EE11B609
mute 0x00000020EE11A00F
vol+ 0x00000020EE11600F
vol- 0x00000020EE11E00F
ch+ 0x00000020EE11400F
ch- 0x00000020EE11C00F
hand 0x00000014307B0000
skip_left 0x00000020EE113A05
skip_right 0x00000020EE11D807
play 0x00000020EE11B00F
backward 0x00000020EE113807
forward 0x00000020EE11B807
pause 0x00000020EE11720D
stop 0x00000020EE11FF00
record 0x00000020EE11700F
clic_left 0x000000142D780000
clic_right 0x00000014317C0000
mouse_up 0x0000001427720000
mouse_down 0x0000001428730000
mouse_right 0x0000001426710000
mouse_left 0x0000001425700000
mouse_up_right 0x000000142A750000
mouse_down_right 0x000000142B760000
mouse_up_left 0x0000001429740000
mouse_down_left 0x000000142C770000
power 0x00000020EE11F00F
# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC
leftbtn_up 0x000000142e790000
rightbtn_up 0x00000014327d0000
pc 0x00000020ee11d40b
end codes
end remote
# this config file was automatically generated
# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004
#
# contributed by Martin Tomasek <mtd@centrum.cz>
#
# brand: ATI Remote Wonder
# model no. of remote control:
# devices being controlled by this remote: ATI USB Receiver (X10).
#
# * remote is set to channel 1, driver reports channel 16. don't know
# which is true.
#
# P: Vendor=0bc7 ProdID=0004 Rev= 1.00
# S: Manufacturer=X10 Wireless Technology Inc
# S: Product=USB Receiver
#
begin remote
name atiusb_ch1
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 227933
toggle_bit 0
begin codes
A 0x000000000000D500
B 0x000000000000D601
C 0x000000000000EE19
D 0x000000000000F01B
E 0x000000000000F621
F 0x000000000000F823
POWER 0x000000000000D702
TV 0x000000000000D803
DVD 0x000000000000D904
WEB 0x000000000000DA05
BOOK 0x000000000000DB06
HAND 0x000000000000DC07
MOUSE_LEFT_BTN 0x0000000000004D78
MOUSE_RIGHT_BTN 0x000000000000517C
MOUSE_LEFT 0x0000000000004570
MOUSE_RIGHT 0x0000000000004671
MOUSE_UP 0x0000000000004772
MOUSE_DOWN 0x0000000000004873
VOL_UP 0x000000000000DD08
VOL_DOWN 0x000000000000DE09
MUTE 0x000000000000DF0A
CH_UP 0x000000000000E00B
CH_DOWN 0x000000000000E10C
1 0x000000000000E20D
2 0x000000000000E30E
3 0x000000000000E40F
4 0x000000000000E510
5 0x000000000000E611
6 0x000000000000E712
7 0x000000000000E813
8 0x000000000000E914
9 0x000000000000EA15
0 0x000000000000EC17
LIST 0x000000000000EB16
CHECK 0x000000000000ED18
UP 0x000000000000EF1A
DOWN 0x000000000000F722
LEFT 0x000000000000F21D
RIGHT 0x000000000000F41F
OK 0x000000000000F31E
TIMER 0x000000000000F11C
MAXIMIZE 0x000000000000F520
REW 0x000000000000F924
FFWD 0x000000000000FB26
PLAY 0x000000000000FA25
STOP 0x000000000000FD28
RECORD 0x000000000000FC27
PAUSE 0x000000000000FE29
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004
#
# contributed by Phil Speights
#
# brand: nvidia
# model no. of remote control: UR88A
# devices being controlled by this remote: nvidia personal cinema
#
begin remote
name ATIUSB_UR88A
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 243948
toggle_bit 0
begin codes
mouse-up 0x4A75
mouse-right_up 0x4A75
mouse-right 0x4671
mouse-right_down 0x4B76
mouse-down 0x4B76
mouse-left_down 0x4873
mouse-left 0x4C77
mouse-left_up 0x4772
esc 0xDF0A
mouse-button_left 0x4D78
mouse-button_right 0x517C
1 0xE20D
2 0xE30E
3 0xE40F
4 0xE510
5 0xE611
6 0xE712
7 0xE813
8 0xE914
9 0xEA15
0 0xEC17
stop 0xFD28
play 0xFA25
fastfoward 0xFB26
rewind 0xF924
pause 0xFE29
record 0xFC27
previous 0xF621
next 0xF823
up 0xEF1A
down 0xF722
right 0xF41F
left 0xF21D
web 0xDC07
music 0xDB06
photo 0xDA05
dvd/vcd 0xD904
dvr 0xD803
mute 0xD500
playlist 0xD601
chsurf 0xD702
dvdmenu 0xEE19
txt 0xEB16
snapshots 0xED18
setup 0xF01B
audio 0xF11C
slow 0xF520
ok 0xF31E
vol+ 0xDE09
vol- 0xDD08
chan- 0xE10C
chan+ 0xE00B
zoom 0xFF2A
angle 0x002B
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005
#
# contributed by Dirk Aust
#
# brand: Medion, Made by X10, China
# Remote P/N: 20016398
# Receiver P/N: 20016397
#
# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC
begin remote
name Medion
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 139873
toggle_bit 0
begin codes
TV 0x012C
VCR 0x022D
DVD 0xD904
MUSIC 0xDB06
RADIO 0x032E
PHOTO 0xDA05
TV_PREVIEW 0x042F
CHANNEL_LIST 0x0530
SETUP 0xF01B
VIDEO_DESKTOP 0x0631
CHAN+ 0xE00B
VOL- 0xDD08
MUTE 0xD500
VOL+ 0xDE09
CHAN- 0xE10C
RED 0x0732
GREEN 0x0833
YELLOW 0x0934
BLUE 0x0A35
TXT 0xEB16
1 0xE20D
2 0xE30E
3 0xE40F
4 0xE510
5 0xE611
6 0xE712
7 0xE813
8 0xE914
9 0xEA15
TV/RADIO 0xF11C
0 0xEC17
DELETE 0xF520
RENAME 0x0B36
SNAPSHOT 0xED18
UP 0xEF1A
LEFT 0xF21D
OK 0xF31E
RIGHT 0xF41F
DOWN 0xF722
ACQ_IMAGE 0x0C37
EDIT_IMAGE 0x0D38
REW 0xF924
PLAY 0xFA25
FFW 0xFB26
RECORD 0xFC27
STOP 0xFD28
PAUSE 0xFE29
PREV 0xF621
FULL 0x0E39
NEXT 0xF823
DVD_MENU 0xEE19
DVD_AUDIO 0x0F3A
POWER 0xD702
end codes
end remote
# this config file was automatically generated
# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005
#
# contributed by Steffen <starv-lirc@juniks.org>
#
# brand: ATI Sapphire Remote Bob II USB
# model no. of remote control: 5000024400
# devices being controlled by this remote: ASUS Digimatrix MythTV PVR
#
begin remote
name 5000024400
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x0
post_data_bits 16
post_data 0x0
gap 299851
toggle_bit 0
begin codes
aux1 0x023F
aux2 0x023F
aux3 0x023F
aux4 0x023F
leftmouse 0x02A9
rightmouse 0x02AA
a 0x0278
b 0x0279
power 0x020C
dvd 0x0238
tv 0x0239
help 0x02BE
pc 0x023F
resize 0x02D5
hand 0x02D0
ati 0x028E
vol-up 0x0210
vol-down 0x0211
mute 0x020D
chan-up 0x0220
chan-down 0x0221
mouse-up 0x013F
mouse-down 0x013F
mouse-left 0x013F
mouse-right 0x013F
1 0x0201
2 0x0202
3 0x0203
4 0x0204
5 0x0205
6 0x0206
7 0x0207
8 0x0208
9 0x0209
0 0x0200
list 0x0254
check 0x0282
info 0x02F9
timer 0x0296
up 0x0258
left 0x025A
right 0x025B
down 0x0259
ok 0x025C
c 0x017A
d 0x027B
play 0x022C
e 0x027C
f 0x027D
rewind 0x0229
rec 0x0237
stop 0x0231
pause 0x0230
ffwd 0x0228
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005
#
# contributed by
#
# brand: Niveus
# model no. of remote control:
# devices being controlled by this remote: Niveus X10
#
begin remote
name Niveus_X10
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 203974
toggle_bit 0
begin codes
power 0x00000020EE11F00F
mouse-up 0x0000001447720000
mouse-down 0x0000001448730000
mouse-left 0x0000001445700000
mouse-right 0x0000001446710000
mouse-up-left 0x0000001449740000
mouse-up-right 0x000000144A750000
mouse-down-left 0x000000144C770000
mouse-down-right 0x000000144B760000
mouse-left-click 0x000000144D780000
mouse-right-click 0x00000014517C0000
mouse-drag 0x00000014507B0000
vol- 0x00000020EE01E00F
vol+ 0x00000020EE81600F
ch- 0x00000020EEE1C00F
ch+ 0x00000020EE61400F
mute 0x00000020EEC1A00F
1 0x00000020EEA1820D
2 0x00000020EE61420D
3 0x00000020EEE1C20D
4 0x00000020EE41220D
5 0x00000020EEC1A20D
6 0x00000020EE81620D
7 0x00000020EE01E20D
8 0x00000020EE31120D
9 0x00000020EEB1920D
ent 0x00000020EE71520D
0 0x00000020EE21020D
a-b 0x00000020EED1BA05
a 0x00000020EE513A05
b 0x00000020EEF1D807
c 0x00000020EEF1D609
d 0x00000020EEF1D906
menu 0x00000020EED1B609
exit 0x00000020EEE1C906
up 0x00000020EEF1D50A
down 0x00000020EEF1D30C
left 0x00000020EEF1D20D
right 0x00000020EEF1D10E
ok 0x00000020EE71520D
rew 0x00000020EE513807
play 0x00000020EED1B00F
ff 0x00000020EED1B807
rec 0x00000020EE11FF00
stop 0x00000020EE91700F
pause 0x00000020EE91720D
end codes
end remote
#
# this config file was manually generated
# Time-stamp: <2006-11-09 10:15:33 root>
#
# contributed by Heike C. Zimmerer <hcz|hczim.de>
#
# brand: Medion MD95700 DVB-T USB box RF remote
# driver: lirc_atiusb
#
#
# Remote ID
#
# You can give your remote a unique ID and instruct lirc_atiusb
# to only accept signals from specific IDs and mask out the others.
#
# To set the ID, hold the select buttun (the only transparent one,
# positioned betwenn volume up/down and channel up/down) down until
# the LED begins to blink. Then enter the channel number (1 through
# 16) and press the button again.
#
# By counting the blinks, you can read out the actual ID your remote
# currently is set to.
#
# Loading the lirc_atiusb driver with "unique=1,mask=0x10" makes it
# recognize only ID 5. Each bit in the mask corresponds to one ID,
# counting from Bit #0 = ID #1 up to Bit #15 = ID #16. So "mask=0x21"
# will let it recognize both IDs #6 and #1, "mask=8" connects only to
# ID #4, and "mask=0xffff" accepts all.
#
#
# UP and DOWN acceleration
#
# the "up" and "down" key names have a trailing underscore followed by
# numbers from 0 to 7 to reflect the motion speed of the up/down
# wheel. You might remove both characters if you aren't interested in
# getting acceleration values.
begin remote
name ATIUSB_MEDION_MD95700
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 139944
toggle_bit_mask 0x80800000
begin codes
1 0x628d
2 0x638e
3 0x648f
4 0x6590
5 0x6691
6 0x6792
7 0x6893
8 0x6994
9 0x6a95
0 0x6c97
Power 0xd702
TV 0x81ac
Video 0x82ad
CD/DVD 0x5984
Teletext 0x6b96
Audio 0x5b86
Radio 0x83ae
Guide 0x86b1
Photo 0x5a85
Info 0x84af
Menu 0x6e99
left 0x729d
up_0 0x4d78
up_1 0x4e79
up_2 0x4f7a
up_3 0x507b
up_4 0x517c
up_5 0x527d
up_6 0x537e
up_7 0x547f
down_0 0x4570
down_1 0x4671
down_2 0x4772
down_3 0x4873
down_4 0x4974
down_5 0x4a75
down_6 0x4b76
down_7 0x4c77
Click 0xf31e
right 0x749f
Back 0xf520
Vol+ 0xde09
Vol- 0xdd08
Select 0xf01b
P+ 0xe00b
P- 0xe10c
Mute 0x5580
Zap 0x719c
Red/Audio 0x87b2
Green/Subtitle 0x88b3
Yellow/Angle 0x89b4
Blue/Title 0x8ab5
Stop 0x7da8
Pause 0x7ea9
Play 0x7aa5
SkipBack 0x76a1
Folder 0x6d98
SkipForward 0x78a3
Rewind 0x79a4
Record 0x7ca7
FastForward 0x7ba6
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005
#
# contributed by a_matteur
#
# brand: MEDION X10 RF
# model no. of remote control: remote P/N:20014752, receiver P/N:20014751
# devices being controlled by this remote:
#
begin remote
name MEDION_X10_RF
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 235923
toggle_bit 0
begin codes
tv 0x012C
vcr 0x022D
dvd 0x0904
music 0x0B06
radio 0x032E
photo 0x0A05
tvpreview 0x042F
channellist 0x0530
setup 0x001B
videodesktop 0x0631
ch+ 0x000B
ch- 0x010C
vol+ 0x0E09
vol- 0x0D08
mute 0x0500
red 0x0732
green 0x0833
yellow 0x0934
blue 0x0A35
txt 0x0B16
0 0x0C17
1 0x020D
2 0x030E
3 0x040F
4 0x0510
5 0x0611
6 0x0712
7 0x0813
8 0x0914
9 0x0A15
tvradio 0x011C
delete 0x0520
rename 0x0B36
snapshot 0x0D18
up 0x0F1A
down 0x0722
left 0x021D
right 0x041F
ok 0x031E
acquireimage 0x0C37
editimage 0x0D38
play 0x0A25
pause 0x0E29
stop 0x0D28
forward 0x0B26
rewind 0x0924
next 0x0823
prev 0x0621
record 0x0C27
fullscreen 0x0E39
dvdmenu 0x0E19
dvdaudio 0x0F3A
power 0x0702
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005
#
# contributed by: Peter J. Weyers <lirc(a)usr-local.de>
#
# brand: MEDION / ATI
# model no. of remote control: 40005927
# devices being controlled by this remote:
#
# This is an USB attached reciever wich works by radio, not by IR. It is
# most probably a relabeled ATI X10 device and sold together with the
# Medion Notebook MD41300. It works with the lirc_atiusb driver while the
# ati_remote module is NOT(!) loaded
begin remote
name MEDION_40005927
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 227972
toggle_bit 0
begin codes
TV_DVD 0x1481AC0000
VIDEO 0x1482AD0000
PHOTO 0x1459840000
MUSIC 0x145B860000
PC 0x1483AE0000
MUTE 0x1455800000
OK 0x14739E0000
UP 0x146F9A0000
DOWN 0x1477A20000
LEFT 0x14729D0000
RIGHT 0x14749F0000
CH+ 0x145E890000
CH- 0x145D880000
VOL+ 0x14608B0000
VOL- 0x14618C0000
PLAY_PAUSE 0x147AA50000
RECORD 0x147CA70000
STOP 0x147DA80000
FRWND 0x1479A40000
FFWD 0x147BA60000
PREV 0x1476A10000
NEXT 0x1478A30000
1 0x14628D0000
2 0x14638E0000
3 0x14648F0000
4 0x1465900000
5 0x1466910000
6 0x1467920000
7 0x1468930000
8 0x1469940000
9 0x146A950000
0 0x146C970000
RC 0x1484AF0000
Screen_Symbol 0x146B960000
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.1pre2(any) on Tue Aug 22 20:53:57 2006
#
# contributed by Patrick-Thomas Chmielewski (www.ptch.de)
#
# brand: Medion X10
# model no. of remote control: P/N 40009936
# devices being controlled by this remote: P/N 40009937
#
begin remote
name Medion_X10
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 227969
min_repeat 2
toggle_bit_mask 0x80800000
begin codes
ok 0x14F31E0000
power 0x14D7020000
tv 0x1481AC0000
video 0x1482AD0000
cd 0x1459840000
txt 0x146B960000
audio 0x145B860000
radio 0x1483AE0000
book 0x1486B10000
photo 0x145A850000
info 0x1484AF0000
menu 0x146E990000
up 0x14CDF80000
down 0x14C5F00000
left 0x14729D0000
right 0x14749F0000
return 0x1475A00000
vol+ 0x145E890000
vol- 0x145D880000
mute 0x1455800000
ch+ 0x14608B0000
ch- 0x14618C0000
last 0x14719C0000
red 0x1487B20000
green 0x1488B30000
yellow 0x1409340000
blue 0x140A350000
stop 0x147DA80000
pause 0x14FE290000
play 0x14FA250000
back 0x14F6210000
time 0x146D980000
next 0x14F8230000
rew 0x14F9240000
rec 0x147CA70000
ff 0x14FB260000
1 0x14E20D0000
2 0x14E30E0000
3 0x14E40F0000
4 0x14E5100000
5 0x14E6110000
6 0x14E7120000
7 0x14E8130000
8 0x14E9140000
9 0x14EA150000
0 0x14EC170000
end codes
end remote
#
# this config file was hand crafted for
# lirc-0.8.0(atiusb) on Sun June 11 22:49:23 2006
#
# contributed by Ted Schipper <t.schipper@tsux.org>
#
# brand: Medion 8802
# Remote P/N: 20029724
# Receiver P/N: 20024123
# model no. of remote control: Medion RF remote
# devices being controlled by this remote: Medion 8802 Multimedia Home Entertainment Design Center
#
begin remote
name Medion_8802
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 227999
min_repeat 5
toggle_bit_mask 0x80800000
begin codes
Line_TV 0x719C
Rec_TV 0x6D98
On/Standby 0xD702
Photo 0x5A85
Music 0x5B86
Guide 0x0631
DVD_Menu 0x5984
Video 0x022D
Text 0x6B96
RED/Audio 0x0732
YELLOW/Angle 0x0934
BLUE/Title 0x0A35
GREEN/Subtitle 0x0833
Vol+ 0x5E89
Vol- 0x5D88
Up 0x6F9A
Down 0x77A2
Left 0x729D
Right 0x749F
Ok 0x739E
Mute 0x5580
Ch+ 0x608B
Ch- 0x618C
1 0x628D
2 0x638E
3 0x648F
4 0x6590
5 0x6691
6 0x6792
7 0x6893
8 0x6994
9 0x6A95
* 0x0C37
0 0x6C97
# 0x0D38
Back 0x75A0
Info 0x042F
Select 0x709B
Rewind 0x79A4
Play 0x7AA5
Fast_Forward 0x7BA6
Pause 0x7EA9
Start 0x76A1
End 0x78A3
Stop 0x7DA8
Record 0x7CA7
end codes
end remote
# this config file was automatically generated
# using lirc-0.8.0(atiusb) on Mon Dec 11 20:45:22 2006
#
# contributed by Wim Lemmers
#
# brand: Medion
# model no. of remote control: OR24E RF MCE Remote Control
# devices being controlled by this remote: Mythtv Linux
#
begin remote
name Medion_OR24E
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 228011
min_repeat 3
toggle_bit 0
begin codes
on_off 0xD702
teletext 0xEB16
yellow 0x89B4
red 0x0732
green 0x88B3
blue 0x0A35
tv_rec 0x6D98
dvd 0xD904
epg 0x86B1
tv 0xF11C
back 0x75A0
info 0x042F
vol+ 0x5E89
vol- 0xDD08
mute 0x5580
prog+ 0xE00B
prog- 0x618C
up 0xEF1A
down 0x77A2
left 0xF21D
right 0x749F
ok 0xF31E
windows 0x709B
previous 0xF621
next 0x78A3
backward 0xF924
forward 0x7BA6
play 0xFA25
stop 0x7DA8
still 0xFE29
record 0x7CA7
1 0xE20D
2 0x638E
3 0xE40F
4 0x6590
5 0xE611
6 0x6792
7 0xE813
8 0x6994
9 0xEA15
0 0x6C97
* 0x0C37
# 0x8DB8
clear 0x0530
enter 0x8BB6
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.1pre5(default) on Tue Mar 6 19:31:31 2007
#
# contributed by Harald Wild - www.wild-technology.de
#
# brand: Q-Sonic Master Remote PC / TV
# model no. of remote control: Art.Nr. PE-9999
# frequency: 433.92 MHz
# distributor Germany: PEARL AGENCY - www.pearl.de
# devices being controlled by this remote: MythTv
#
begin remote
name Q-Sonic_Master_Remote
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 203972
toggle_bit 0
begin codes
POWER 0x20EE11F00F
MouseLEFT 0x1449740000
MouseRIGHT 0x1446710000
MouseUP 0x1447720000
MouseDOWN 0x1448730000
MouseButtonLEFT 0x144D780000
MouseButtonRIGHT 0x14517C0000
Volume+ 0x20EE81600F
Volume- 0x20EE01E00F
Channel+ 0x20EE61400F
Channel- 0x20EEE1C00F
M 0x20EEC1A00F
1 0x20EEA1820D
2 0x20EE61420D
3 0x20EEE1C20D
4 0x20EE41220D
5 0x20EEC1A20D
6 0x20EE81620D
7 0x20EE01E20D
8 0x20EE31120D
9 0x20EEB1920D
0 0x20EE21020D
-/-- 0x20EE71520D
AV 0x20EED1BA05
MENU 0x20EED1B609
EXIT 0x20EEE1C906
VideoTextLO 0x20EED1B609
VideoTextRO 0x20EEE1C906
VideoTextLU 0x20EE513A05
VideoTextRU 0x20EEF1D807
UP 0x20EEF1D50A
DOWN 0x20EEF1D30C
LEFT 0x20EEF1D20D
RIGHT 0x20EEF1D10E
OK 0x20EE71520D
PLAY 0x20EED1B00F
<< 0x20EE513807
>> 0x20EED1B807
REC 0x20EE11FF00
STOP 0x20EE91700F
PAUSE 0x20EE91720D
end codes
end remote
# This config file was automatically generated
# using lirc-0.8.2-CVS(lirc_atiusb) on Wed Feb 10.03.2007
#
# contributed by boris64 (me@boris64.net ;)
#
# brand: "AR Remote Control MCE"
# "Made in China by X10"
# grey/silver colored with "MS-Logo"
# model no.: "1040050"
#
# devices being controlled by this remote:
# PCs running "Microsoft MediaCenterEdition(?)"
#
# some pictures/infos of this remote can be found here:
# -> http://www.mce-community.de/forum/index.php?showtopic=11652&hl=x
# -> http://cgi.ebay.de/MCE-Fernbedienung-WINDOWS-XP-Media-Center-Zertifiziert_W0QQitemZ8810664119QQcategoryZ38861QQ rdZ1QQcmdZViewItem
#
begin remote
name AR_Remote_Control_MCE
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 227995
toggle_bit_mask 0x80800000
begin codes
POWER 0xD702
RED 0x87B2
YELLOW 0x0934
GREEN 0x88B3
BLUE 0x0A35
TELETEXT 0x6B96
BACKSPACE 0xF520
INFO 0x84AF
UP 0xEF1A
LEFT 0x729D
RIGHT 0xF41F
DOWN 0x77A2
OK 0xF31E
TIMESHIFT 0x6D98
EPG 0x0631
TV/FM 0x719C
CD/DVD 0xD904
M$LOGO 0x709B
VOL+ 0xDE09
VOL- 0x5D88
CHAN+ 0xE00B
CHAN- 0x618C
MUTE 0xD500
PREV 0x76A1
NEXT 0xF823
REW 0x79A4
PLAY 0xFA25
FFW 0x7BA6
RECORD 0xFC27
STOP 0x7DA8
PAUSE 0xFE29
1 0x628D
2 0xE30E
3 0x648F
4 0xE510
5 0x6691
6 0xE712
7 0x6893
8 0xE914
9 0x6A95
0 0xEC17
* 0x8CB7
HASH 0x0D38
CLEAR 0x85B0
ENTER 0x0B36
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.1(default) on Sun May 27 19:55:56 2007
#
# contributed by Revertive
#
# brand: Toshiba X10
# model no. of remote control: PX1246E-1ETC
# devices being controlled by this remote: PC(Hauppage PVR-500)
#
begin remote
name Toshiba_X10
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 228000
min_repeat 11
toggle_bit 0
begin codes
power 0xD702
red 0x87B2
yellow 0x0934
green 0x88B3
blue 0x0A35
teletext 0x6B96
back 0xF520
info 0x84AF
up 0xEF1A
down 0x77A2
left 0xF21D
right 0x749F
ok 0xF31E
recordings 0x6D98
dvds 0x5984
tvguide 0x0631
livetv 0x719C
volume+ 0x5E89
volume- 0xDD08
channel+ 0x608B
channel- 0x618C
start 0xF01B
mute 0x5580
rewind 0x76A1
forward 0xF823
next 0x79A4
prev 0xFB26
play 0x7AA5
record 0xFC27
stop 0x7DA8
pause 0xFE29
1 0x628D
2 0xE30E
3 0x648F
4 0xE510
5 0x6691
6 0xE712
7 0x6893
8 0xE914
9 0x6A95
0 0xEC17
* 0x8CB7
# 0x0D38
clear 0x85B0
enter 0x0B36
end codes
end remote
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.2-CVS(atilibusb) on Fri Jun 8 13:19:29 2007
#
# contributed by
#
# brand:
# model no. of remote control: ATI/X10 RF USB Remote Control v. 2.2.1
# devices being controlled by this remote:
#
# comes with Packard Bell MC9667
#
begin remote
name ATI_REMOTE_2_2_1
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 139999
toggle_bit_mask 0x0
begin codes
POWER 0xD702
TV 0xEB16
RED 0x88B3
GREEN 0x0732
YELLOW 0x89B4
BLUE 0x0A35
TV2 0x81AC
CAMCORDER 0x022D
MUSIC 0x5B86
CAMERA 0xDA05
TVRECORDER 0x6D98
CD 0xD904
EQUALIZER 0x86B1
TVPLAYER 0xF11C
BACK 0x75A0
INFORMATION 0x042F
TOP 0x6F9A
LEFT 0xF21D
OK 0x739E
RIGHT 0xF41F
DOWN 0x77A2
SOUNDPLUS 0xDE09
SOUNDMINUS 0x5D88
WINDOB 0xF01B
CHANNELUP 0x608B
CHANNELDOWN 0xE10C
MUTE 0x5580
RECORD 0xFC27
STOP 0x7DA8
PAUSE 0xFE29
REWIND 0x79A4
PLAY 0xFA25
FORWARD 0x7BA6
BACKREWIND 0xF621
BACKFORWARD 0x78A3
1 0xE20D
2 0x638E
3 0xE40F
4 0x6590
5 0xE611
6 0x6792
7 0xE813
8 0x6994
9 0xEA15
ASTERISK 0x8CB7
0 0xEC17
DIESE 0x8DB8
CLEAR 0x0530
ENTER 0x8BB6
end codes
end remote
begin remote
name Snapstream Firefly
bits 40
eps 30
aeps 100
one 0 0
zero 0 0
gap 219964
toggle_bit 0
begin codes
MAXI 0x0000001481AC0000
MAXI 0x00000014012C0000
CLOSE 0x00000014D7020000
CLOSE 0x0000001457820000
1 0x00000014628D0000
1 0x00000014E20D0000
2 0x00000014E30E0000
2 0x00000014638E0000
3 0x00000014648F0000
3 0x00000014E40F0000
4 0x00000014E5100000
4 0x0000001465900000
5 0x0000001466910000
5 0x00000014E6110000
6 0x00000014E7120000
6 0x0000001467920000
7 0x0000001468930000
7 0x00000014E8130000
8 0x00000014E9140000
8 0x0000001469940000
9 0x000000146A950000
9 0x00000014EA150000
0 0x00000014EC170000
0 0x000000146C970000
BACK 0x000000146B960000
BACK 0x00000014EB160000
ENT 0x00000014ED180000
ENT 0x000000146D980000
VOL+ 0x000000145E890000
VOL+ 0x00000014DE090000
VOL- 0x000000145D880000
VOL- 0x00000014DD080000
MUTE 0x000000145F8A0000
MUTE 0x00000014DF0A0000
FIREFLY 0x0000001455800000
FIREFLY 0x00000014D5000000
CH+ 0x00000014608B0000
CH+ 0x00000014E00B0000
CH- 0x00000014618C0000
CH- 0x00000014E10C0000
INFO 0x0000001483AE0000
INFO 0x00000014032E0000
OPTION 0x0000001484AF0000
OPTION 0x00000014042F0000
UP 0x000000146F9A0000
UP 0x00000014EF1A0000
LEFT 0x00000014729D0000
LEFT 0x00000014F21D0000
DOWN 0x0000001477A20000
DOWN 0x00000014F7220000
RIGHT 0x00000014749F0000
RIGHT 0x00000014F41F0000
OK 0x00000014739E0000
OK 0x00000014F31E0000
MENU 0x00000014719C0000
MENU 0x00000014F11C0000
EXIT 0x0000001475A00000
EXIT 0x00000014F5200000
REC 0x00000014FC270000
REC 0x000000147CA70000
PLAY 0x00000014FA250000
PLAY 0x000000147AA50000
STOP 0x00000014FD280000
STOP 0x000000147DA80000
REW 0x00000014F9240000
REW 0x0000001479A40000
FWD 0x00000014FB260000
FWD 0x000000147BA60000
PREV 0x00000014002B0000
PREV 0x0000001480AB0000
PAUSE 0x00000014FE290000
PAUSE 0x000000147EA90000
NEXT 0x00000014FF2A0000
NEXT 0x000000147FAA0000
MUSIC 0x00000014DB060000
MUSIC 0x000000145B860000
PHOTOS 0x00000014DA050000
PHOTOS 0x000000145A850000
DVD 0x00000014D9040000
DVD 0x0000001459840000
TV 0x00000014D8030000
TV 0x0000001458830000
VIDEO 0x00000014DC070000
VIDEO 0x000000145C870000
HELP 0x00000014D6010000
HELP 0x0000001456810000
MOUSE 0x00000014022D0000
MOUSE 0x0000001482AD0000
A 0x00000014EE190000
A 0x000000146E990000
B 0x00000014F01B0000
B 0x00000014709B0000
C 0x00000014F6210000
C 0x0000001476A10000
D 0x00000014F8230000
D 0x0000001478A30000
end codes
end remote
Here is the content of lircmd.conf located at /etc/lirc
#UNCONFIGURED
#
# To find out how to get a proper configuration file please read:
#
# /usr/share/doc/lirc/README.Debian
I do not have any files in my home/lvcoyote/ directory with a .lircrc
Furthermore I do not see Lirc generator in control panel unless you are talking about where I select my remote control from the list.