kubuntu 7.10 resolution settings gone after logging in

[monkman]

geforce 6200a
samtron 96p (CRT)
kubuntu 7.10
nvidia driver (not the "new" one)

when starting i see the nvidia logo.
the kdm screen resolution and refresh rate is okay. but after logging in, my refresh rate changes to 43HZ. so i start nvidia-settings and change it up to 85hz.

i would like to know whether it is possible to make kubuntu remember these settings

my xorg.conf:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV44A [GeForce 6200]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 262144
EndSection

Section "Monitor"
Identifier "S/T 97P/96P"
Option "DPMS"
HorizSync 30-96
VertRefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV44A [GeForce 6200]"
Monitor "S/T 97P/96P"
DefaultDepth 24
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection



thank you!

[FuturePilot]

Try this
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV44A [GeForce 6200]"
Monitor "S/T 97P/96P"
DefaultDepth 24
Option "metamodes" "1280x1024_85 +0+0"
Add the line in Bold to the screen section. I'm assuming your res is 1280x1024
The _85 specifies the refresh rate.