HOWTO: On-Access ("resident") virus scanning with clamav + dazuko

[drigloi]

I managed to bring alive ClamAV's On-Access virus scanning feature (so it detects virus infected files at once when they are accessed/opened) here's how:

NOTE: viruses don't really threat Linux boxes. Virus scanners are actually scan for W32 and MSOffice viruses - this can be handy if you multi boot Ubuntu with a Win or don't want to infect your friends. The HOWTO may seem a bit complicated at first - but it really is not :) well a bit... But I bet you'll enjoy it if you accomplish it!

1. install clamav and clamav-daemon with apt
sudo apt-get install clamav clamav-daemon

2. install dazuko. NOTE: Ubuntu/Debian package is quite old, use the latest one from dazuko.org like this:
wget http://www.dazuko.org/files/dazuko-source_2.0.6-1_all.deb
sudo dpkg -i dazuko-source_2.0.6-1_all.deb

3. configuration of Dazuko is much easier with module-assistant this way:
sudo apt-get install module-assistant
m-a a-i dazuko

4. After you have the Dazuko kernel module you can't modprobe it yet - because kernel module capability conflicts with it. Solution is that you load dazuko PRIOR capability (this way both will work). You can achieve it this way:
sudo gedit /etc/modules
and write in dazuko in this file (I've written it before ide-cd but I don't think it matters).

5. Reboot the computer! You can test if dazuko loaded properly by issuing the "lsmod | grep dazuko" command.

6. Now the problem part: Ubuntu's official clamav package was made without clamuko support unfortunately (clamuko is clamav's interface to interact with dazuko - tricky, eh?). No problem the effort will worth the result - believe me. We will rebuild Ubuntu's clamav to our needs:
sudo apt-get install fakeroot build-essential
sudo apt-get build-dep clamav
sudo apt-get source clamav

7. These commands will setup the required build environment and source files for the package rebuild. You should have a clamav-0.83/ subdir by now so
cd clamav-0.83/
gedit debian/rules

and replace
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-clamav --with-dbdir=/var/lib/clamav/ --sysconfdir=/etc/clamav --enable-milter --with-tcpwrappers --disable-clamuko --with-gnu-ld --with-libcurl --with-dns

with
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-clamav --with-dbdir=/var/lib/clamav/ --sysconfdir=/etc/clamav --enable-milter --with-tcpwrappers --with-gnu-ld --with-libcurl --with-dns

(don't let these scare you: the only difference between them is that we removed "--disable-clamuko" from the ./configure line)

8. Now rebuild the clamav packages with this command:
dpkg-buildpackage -rfakeroot -uc -us

9. You'll find the new packages up one level in the dir hierarchy so do a
cd ..
sudo dpkg -i *.deb

10. So we've the clamuko enabled packages installed now. Last step is to configure clamav-daemon by editing /etc/clamav/clamd.conf:
sudo gedit /etc/clamav/clamd.conf

Insert the following:
ClamukoScanOnAccess
ClamukoScanOnOpen
ClamukoScanArchive
ClamukoIncludePath /home

Also replace "User clamav" with "User root" to let things work (* will need a fix for this - give your ideas plz *)

11. Restart clamav-daemon to make changes take effect:
sudo invoke-rc.d clamav-daemon restart

12. You'd like to see how it's working?

You can grab the "eicar" test virus (no malicious code, just for testing) from here:
http://www.eicar.org/anti_virus_test_file.htm

You can also try it with real-life (!) viruses from here:
http://vx.netlux.org/vl.php

You won't be able to open virus infected files/archives - clamav+dazuko immediately bans access to them (deletion is possible though). Also "tail /var/log/clamav/clamav.log" tells you about the virus. Try man clamd.conf for more options. I suggest to look after the "VirusEvent" option. The possibilities from here are limitless.

NOTE: Ubuntu's official clamav package and the dazuko-source (I bet it is not in main/restricted:) package are outdated. Backport has a more current clamav package but unfortunately both repos has the "clamuko" feature disabled and that's why on-access scanning doesn't work out-of-the-box. I hope this will change with time. I hope you liked my howto and clamav/dazuko. Clamav is btw an excellent virus scanner and is updated multiple times a day.

[drigloi]

I've developed a simple script (called ClamDazer) for handling virus events. You can see a screenshot here:

http://xpedition.mine.nu/clamdazer/clamdazer.jpg

You can easily set it up this way:

1.
sudo gedit /opt/clamdazer

2. copy and paste to /opt/clamdazer:
#!/bin/sh
#Clamdazer script by Gabor Igloi (2005) GPL

v=`tail -n 1 /var/log/clamav/clamav.log`
v=${v#*: }
v=${v%:*}

f=${v##*/}

zenity --title ClamDazer --warning --text '"'"$f"$'" CONTAINS A VIRUS!\n[ '"$1"$' ]\nWould you like to delete it?'

if [ $? -eq 0 ]; then
rm $v
zenity --title ClamDazer --info --text '"'"$f"$'"\nRemoved successfully!'
fi

3. making it executable
sudo chmod a+x /opt/clamdazer

4. finally add VirusEvent option to /etc/clamav/clamd.conf
sudo gedit /etc/clamav/clamd.conf

Add this line to the end of clamd.conf:
VirusEvent /opt/clamdazer %v &

5. Don't forget to restart clamav-daemon by "sudo invoke-rc.d clamav-daemon restart"

Now you'll get a warning dialog everytime you click on an infected file/archive and you can delete it easily.

[sal]

I managed to bring alive ClamAV's On-Access virus scanning feature (so it detects virus infected files at once when they are accessed/opened) here's how:

NOTE: viruses don't really threat Linux boxes. Virus scanners are actually scan for W32 and MSOffice viruses - this can be handy if you multi boot Ubuntu with a Win or don't want to infect your friends. The HOWTO may seem a bit complicated at first - but it really is not :) well a bit... But I bet you'll enjoy it if you accomplish it!

1. install clamav and clamav-daemon with apt
sudo apt-get install clamav clamav-daemon

2. install dazuko. NOTE: Ubuntu/Debian package is quite old, use the latest one from dazuko.org like this:
wget http://www.dazuko.org/files/dazuko-source_2.0.6-1_all.deb
sudo dpkg -i dazuko-source_2.0.6-1_all.deb

3. configuration of Dazuko is much easier with module-assistant this way:
sudo apt-get install module-assistant
m-a a-i dazuko

4. After you have the Dazuko kernel module you can't modprobe it yet - because kernel module capability conflicts with it. Solution is that you load dazuko PRIOR capability (this way both will work). You can achieve it this way:
sudo gedit /etc/modules
and write in dazuko in this file (I've written it before ide-cd but I don't think it matters).

5. Reboot the computer! You can test if dazuko loaded properly by issuing the "lsmod | grep dazuko" command.

6. Now the problem part: Ubuntu's official clamav package was made without clamuko support unfortunately (clamuko is clamav's interface to interact with dazuko - tricky, eh?). No problem the effort will worth the result - believe me. We will rebuild Ubuntu's clamav to our needs:
sudo apt-get install fakeroot build-essential
sudo apt-get build-dep clamav
sudo apt-get source clamav

7. These commands will setup the required build environment and source files for the package rebuild. You should have a clamav-0.83/ subdir by now so
cd clamav-0.83/
gedit debian/rules

and replace
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-clamav --with-dbdir=/var/lib/clamav/ --sysconfdir=/etc/clamav --enable-milter --with-tcpwrappers --disable-clamuko --with-gnu-ld --with-libcurl --with-dns

with
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-clamav --with-dbdir=/var/lib/clamav/ --sysconfdir=/etc/clamav --enable-milter --with-tcpwrappers --with-gnu-ld --with-libcurl --with-dns

(don't let these scare you: the only difference between them is that we removed "--disable-clamuko" from the ./configure line)

8. Now rebuild the clamav packages with this command:
dpkg-buildpackage -rfakeroot -uc -us

9. You'll find the new packages up one level in the dir hierarchy so do a
cd ..
sudo dpkg -i *.deb

10. So we've the clamuko enabled packages installed now. Last step is to configure clamav-daemon by editing /etc/clamav/clamd.conf:
sudo gedit /etc/clamav/clamd.conf

Insert the following:
ClamukoScanOnAccess
ClamukoScanOnOpen
ClamukoScanArchive
ClamukoIncludePath /home

Also replace "User clamav" with "User root" to let things work (* will need a fix for this - give your ideas plz *)

11. Restart clamav-daemon to make changes take effect:
sudo invoke-rc.d clamav-daemon restart

12. You'd like to see how it's working?

You can grab the "eicar" test virus (no malicious code, just for testing) from here:
http://www.eicar.org/anti_virus_test_file.htm

You can also try it with real-life (!) viruses from here:
http://vx.netlux.org/vl.php

You won't be able to open virus infected files/archives - clamav+dazuko immediately bans access to them (deletion is possible though). Also "tail /var/log/clamav/clamav.log" tells you about the virus. Try man clamd.conf for more options. I suggest to look after the "VirusEvent" option. The possibilities from here are limitless.

NOTE: Ubuntu's official clamav package and the dazuko-source (I bet it is not in main/restricted:) package are outdated. Backport has a more current clamav package but unfortunately both repos has the "clamuko" feature disabled and that's why on-access scanning doesn't work out-of-the-box. I hope this will change with time. I hope you liked my howto and clamav/dazuko. Clamav is btw an excellent virus scanner and is updated multiple times a day.


after using this method would i have to do it again every time ubuntu releses a new kernel or a kernel update? and will this work with the clamav front end gui i think its called klamAV http://www.kde-apps.org/content/show.php?content=12388

thanks.

[sal]

I've developed a simple script (called ClamDazer) for handling virus events. You can see a screenshot here:

http://xpedition.mine.nu/clamdazer/clamdazer.jpg

You can easily set it up this way:

1.
sudo gedit /opt/clamdazer

2. copy and paste to /opt/clamdazer:
#!/bin/sh
#Clamdazer script by Gabor Igloi (2005) GPL

v=`tail -n 1 /var/log/clamav/clamav.log`
v=${v#*: }
v=${v%:*}

f=${v##*/}

zenity --title ClamDazer --warning --text '"'"$f"$'" CONTAINS A VIRUS!\n[ '"$1"$' ]\nWould you like to delete it?'

if [ $? -eq 0 ]; then
rm $v
zenity --title ClamDazer --info --text '"'"$f"$'"\nRemoved successfully!'
fi

3. making it executable
sudo chmod a+x /opt/clamdazer

4. finally add VirusEvent option to /etc/clamav/clamd.conf
sudo gedit /etc/clamav/clamd.conf

Add this line to the end of clamd.conf:
VirusEvent /opt/clamdazer %v &

5. Don't forget to restart clamav-daemon by "sudo invoke-rc.d clamav-daemon restart"

Now you'll get a warning dialog everytime you click on an infected file/archive and you can delete it easily.

should this go in /etc/opt or /var/opt?

[drigloi]

I placed it under /opt.

[fourchannel]

my clamav will detect the eicar virus. but when i'm in console and open it, it does nothing to stop me. no warning, and i set up the clamdazer script.

my clamd.conf
#Automatically Generated by clamav-base postinst
#To reconfigure clamd run #dpkg-reconfigure clamav-base
#Please read /usr/share/doc/clamav-base/README.Debian.gz for details

#-------from the insta-scan manual
ClamukoScanOnAccess
ClamukoScanOnOpen
ClamukoScanArchive
ClamukoIncludePath /home



LocalSocket /var/run/clamav/clamd.ctl
FixStaleSocket
User root
ScanMail
ScanArchive
ArchiveMaxRecursion 5
ArchiveMaxFiles 1000
ArchiveMaxFileSize 10M
ArchiveMaxCompressionRatio 250
ReadTimeout 180
MaxThreads 12
MaxConnectionQueueLength 15
LogFile /var/log/clamav/clamav.log
LogTime
LogFileMaxSize 0
PidFile /var/run/clamav/clamd.pid
DatabaseDirectory /var/lib/clamav
SelfCheck 3600
VirusEvent /opt/clamdazer %v &
and clamdazer, with root:root 755 own, perm

#!/bin/sh
#Clamdazer script by Gabor Igloi (2005) GPL

v=`tail -n 1 /var/log/clamav/clamav.log`
v=${v#*: }
v=${v%:*}

f=${v##*/}

zenity --title ClamDazer --warning --text '"'"$f"$'" CONTAINS A VIRUS!\n[ '"$1"$' ]\nWould you like to delete it?'

if [ $? -eq 0 ]; then
rm $v
zenity --title ClamDazer --info --text '"'"$f"$'"\nRemoved successfully!'
fi

[ZoltanPatay]

Dazuko module can be loaded properly also using modules.d and then you wont need reboot, since "modprobe dazuko" will work. See it here: http://www.ubuntuforums.org/showpost.php?p=634418&postcount=13

[ameerirshad]

7. These commands will setup the required build environment and source files for the package rebuild. You should have a clamav-0.83/ subdir by now so
cd clamav-0.83/
gedit debian/rules

and replace
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-clamav --with-dbdir=/var/lib/clamav/ --sysconfdir=/etc/clamav --enable-milter --with-tcpwrappers --disable-clamuko --with-gnu-ld --with-libcurl --with-dns

with
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-clamav --with-dbdir=/var/lib/clamav/ --sysconfdir=/etc/clamav --enable-milter --with-tcpwrappers --with-gnu-ld --with-libcurl --with-dns

(don't let these scare you: the only difference between them is that we removed "--disable-clamuko" from the ./configure line)

Ok untill point 7 everything went rite! But I can't find
cd clamav-0.83/
gedit debian/rulesAnd as such everything further down the line I can't perform I guess!

[Video Toaster]

Wow, great how-to! This was exactly what I was looking for!

However, I ran into a slight problem - when I try to download the source for clamav, apt tells me that a source package cannot be found. (Dapper Drake, ClamAV 0.84). Any ideas?

EDIT: Never mind... I uncommented Universe in my source list and the source package was found. Oops. :D

[Yun_Pilgrim]

I have followed the instructions until after I installed the module assistant, i ran
m-a a-i dazuko
and got the following error in the log (after it stopped on about 2%):
dh_clean
│ /usr/bin/make -f debian/rules kdist_clean kdist_config binary-modules ▒
│ make[1]: Entering directory `/usr/src/modules/dazuko' ▒
│ dh_clean ▒
│ make[1]: dh_clean: Command not found ▒
│ make[1]: *** [kdist_clean] Error 127 ▒
│ make[1]: Leaving directory `/usr/src/modules/dazuko' ▒
│ make: *** [kdist_build] Error 2

Im a newbie running Ubuntu 5.10.
Could it be the kernel source or headers or something?
Please help.

Thanks.

[Yun_Pilgrim]

The first time you run module-assistant, you have to run the prepare. Using the module-assistant prepare command will download the kernel headers, matching your installed kernel version, and other files necessary to insert modules into the kernel. Issue the following command in the Terminal window:

sudo module-assistant prepare

...from here (http://allyourtech.com/content/articles/15_01_2006_installing_antivir_with_on_access_scann ing_in_ubuntu_linux.php)
This solved my problem.
:-D 8)

[stell86]

cd clamav-0.83/
gedit debian/rules
I've tried with both 0.88.2 (from 'normal' repositories) and 0.88.4 (from backports), but I can't find 'debian' or 'rules'
I new to compiling, so much of this was a walk in dark park for me - i'll bring the flashlght next time...

retief

[Hormat Grak]

Excuse me, can anyone here tell me how to change dazuko file permission to a+rwx automatically on boot. Thanks

[yel]

how to change dazuko file permission to a+rwx automatically on boot

Also replace "User clamav" with "User root" to let things work (* will need a fix for this - give your ideas plz *)


You can add the chmod command to the file /etc/modprobe.d/dazuko :

sudo gedit /etc/modprobe.d/dazuko

And copy and paste the following code:

install dazuko modprobe -r capability;\
modprobe -i dazuko; \
chmod a+rwx /dev/dazuko; \
modprobe -i capability

But I think that to give some right for all users can raise problems of securities.

To by-pass it, I prefer to create a group, ie dazuko, which I add as secondary group to the user clamav. As it clamuko has access to dazuko without giving the right for all users.

You have to replace the chmod line in /etc/modprobe.d/dazuko by:

chgrp dazuko /dev/dazuko; \

[salman01]

i have the same problem...

[vitorio]

I'm having similar problem in Gutsy. Dazuko is installed (from latest source), module is loaded, device is created.

Clamav is installed from Gutsy repository and seems to be working. The only problem I've noticed that clamDscan does not have access to /home unless I change "User clamav" to "User root" in clamd.conf. But then I can use clamscan and freshclam only as root.

But the major problem clamd.conf reports:"Clamuko is not available". Even if "User root" is set in clamd.conf.

Since this howto was created in year 2006 and based on the fact that Ubuntu Clamav package at that time was built with --desable-clamuko option, my question is whether this is still applicable to Gutsy Clamav package?

Shoud I rebuild my installation or things changed and I'm having a different problem here?

Thank you.

[ambiman2]

Hi guys,

i've patched my current kernel (rel. 2.6.26) with dazuko. Removed sec compatibilities and SELinux support. Device /dev/dazuko exists (full rights for everyone :-) ). I've compilied clamav 0.94 (without --disable-clamuko) but i'm still unable to scan my files realtime cause:
In the logfile i can see "ERROR: Unable to start Clamuko."

Sorry, but i've no further debugging information.

Any ideas?

Kind regards,

Daniel

[stuffystuff200681]

can't compile it :( this is what i get

user@user-laptop:~/clamav-0.95.1+dfsg$ dpkg-buildpackage -rfakeroot -uc -us
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package clamav
dpkg-buildpackage: source version 0.95.1+dfsg-1ubuntu1.2
dpkg-buildpackage: source changed by Imre Gergely <gimre@narancs.net>
dpkg-buildpackage: host architecture i386
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-res
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-base
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-binfilter
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-math
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-draw
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-impress
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-calc
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-writer
dpkg-checkbuilddeps: warning: can't parse dependency ooobasis31-en_us-help
fakeroot debian/rules clean
debconf-updatepo
dh_testdir
dh_testroot
/usr/bin/make distclean
make[1]: Entering directory `/home/user/clamav-0.95.1+dfsg'
Making distclean in clamdtop
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/clamdtop'
rm -f clamdtop clamdtop
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
rm: cannot remove `./.deps/clamdtop.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/clamdtop'
Making distclean in unit_tests
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/unit_tests'
rm -f check_clamav check_clamav
rm -f check_clamd check_clamd
test -z "lcov.out *.gcno *.gcda *.log clam-phish-exe test-stderr.log clamscan.log valgrind-*.log duma.log duma2.log clamscan2.log" || rm -f lcov.out *.gcno *.gcda *.log clam-phish-exe test-stderr.log clamscan.log valgrind-*.log duma.log duma2.log clamscan2.log
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/check_clamav-check_matchers.Po': Permission denied
rm: cannot remove `./.deps/check_clamd-check_clamav_skip.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_regex.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_uniq.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_htmlnorm.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_str.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_clamav_skip.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_jsnorm.Po': Permission denied
rm: cannot remove `./.deps/check_clamd-check_clamd.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_clamav.Po': Permission denied
rm: cannot remove `./.deps/check_clamav-check_disasm.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/unit_tests'
Making distclean in test
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/test'
rm -rf .libs _libs
rm -f clam-v2.rar clam-v3.rar clam.cab clam.exe.bz2 clam.exe clam.zip clam.arj clam.exe.rtf clam.exe.szdd clam.tar.gz clam.chm clam.sis clam-aspack.exe clam-pespin.exe clam-upx.exe clam-fsg.exe clam-mew.exe clam-nsis.exe clam-petite.exe clam-upack.exe clam-wwpack.exe clam.pdf clam.mail clam.ppt clam.tnef clam.ea05.exe clam.ea06.exe clam.d64.zip clam.exe.mbox.base64 clam.exe.mbox.uu clam.exe.binhex clam.ole.doc clam.impl.zip clam.exe.html clam.bz2.zip
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/test'
Making distclean in clamav-milter
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/clamav-milter'
test -z "*.gcda *.gcno" || rm -f *.gcda *.gcno
rm -rf .libs _libs
rm -f clamav-milter clamav-milter
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/clamfi.Po': Permission denied
rm: cannot remove `./.deps/connpool.Po': Permission denied
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/whitelist.Po': Permission denied
rm: cannot remove `./.deps/output.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
rm: cannot remove `./.deps/netcode.Po': Permission denied
rm: cannot remove `./.deps/clamav-milter.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/clamav-milter'
Making distclean in etc
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/etc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/etc'
Making distclean in docs
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/docs'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/docs'
Making distclean in database
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/database'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/database'
Making distclean in clamconf
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/clamconf'
rm -f clamconf clamconf
test -z "*.gcda *.gcno" || rm -f *.gcda *.gcno
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
rm: cannot remove `./.deps/clamconf.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/clamconf'
Making distclean in sigtool
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/sigtool'
rm -f sigtool sigtool
test -z "*.gcda *.gcno" || rm -f *.gcda *.gcno
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/tar.Po': Permission denied
rm: cannot remove `./.deps/cdiff.Po': Permission denied
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/sigtool.Po': Permission denied
rm: cannot remove `./.deps/vba.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/output.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/sigtool'
Making distclean in freshclam
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/freshclam'
rm -f freshclam freshclam
test -z "*.gcda *.gcno" || rm -f *.gcda *.gcno
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/execute.Po': Permission denied
rm: cannot remove `./.deps/tar.Po': Permission denied
rm: cannot remove `./.deps/cdiff.Po': Permission denied
rm: cannot remove `./.deps/nonblock.Po': Permission denied
rm: cannot remove `./.deps/notify.Po': Permission denied
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/mirman.Po': Permission denied
rm: cannot remove `./.deps/dns.Po': Permission denied
rm: cannot remove `./.deps/freshclam.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/output.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
rm: cannot remove `./.deps/manager.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/freshclam'
Making distclean in clamdscan
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/clamdscan'
rm -f clamdscan clamdscan
test -z "*.gcda *.gcno" || rm -f *.gcda *.gcno
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/client.Po': Permission denied
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/clamdscan.Po': Permission denied
rm: cannot remove `./.deps/actions.Po': Permission denied
rm: cannot remove `./.deps/strlcpy.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/output.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
rm: cannot remove `./.deps/proto.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/clamdscan'
Making distclean in clamd
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/clamd'
test -z "*.gcda *.gcno" || rm -f *.gcda *.gcno
rm -rf .libs _libs
rm -f clamd clamd
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/server-th.Po': Permission denied
rm: cannot remove `./.deps/others.Po': Permission denied
rm: cannot remove `./.deps/network.Po': Permission denied
rm: cannot remove `./.deps/dazukoio_compat12.Po': Permission denied
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/thrmgr.Po': Permission denied
rm: cannot remove `./.deps/clamd.Po': Permission denied
rm: cannot remove `./.deps/localserver.Po': Permission denied
rm: cannot remove `./.deps/scanner.Po': Permission denied
rm: cannot remove `./.deps/dazukoio.Po': Permission denied
rm: cannot remove `./.deps/tcpserver.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/output.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
rm: cannot remove `./.deps/clamuko.Po': Permission denied
rm: cannot remove `./.deps/session.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/clamd'
Making distclean in clamscan
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/clamscan'
rm -f clamscan clamscan
test -z "*.gcda *.gcno" || rm -f *.gcda *.gcno
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/others.Po': Permission denied
rm: cannot remove `./.deps/misc.Po': Permission denied
rm: cannot remove `./.deps/actions.Po': Permission denied
rm: cannot remove `./.deps/optparser.Po': Permission denied
rm: cannot remove `./.deps/output.Po': Permission denied
rm: cannot remove `./.deps/getopt.Po': Permission denied
rm: cannot remove `./.deps/clamscan.Po': Permission denied
rm: cannot remove `./.deps/manager.Po': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/clamscan'
Making distclean in libclamav
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/libclamav'
Making distclean in lzma
make[3]: Entering directory `/home/user/clamav-0.95.1+dfsg/libclamav/lzma'
rm -rf .libs _libs
test -z "liblzma.la" || rm -f liblzma.la
rm -f "./so_locations"
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/LzmaStateDecode.Plo': Permission denied
make[3]: [distclean] Error 1 (ignored)
rm -f Makefile
make[3]: Leaving directory `/home/user/clamav-0.95.1+dfsg/libclamav/lzma'
Making distclean in .
make[3]: Entering directory `/home/user/clamav-0.95.1+dfsg/libclamav'
test -z "version.h version.h.tmp *.gcda *.gcno lzma/*.gcda lzma/*.gcno" || rm -f version.h version.h.tmp *.gcda *.gcno lzma/*.gcda lzma/*.gcno
test -z " libclamav.la" || rm -f libclamav.la
rm -f "./so_locations"
rm -rf .libs _libs
test -z "libclamav_internal_utils.la libclamav_internal_utils_nothreads.la" || rm -f libclamav_internal_utils.la libclamav_internal_utils_nothreads.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory `/home/user/clamav-0.95.1+dfsg/libclamav'
rm -rf ./.deps
rm: cannot remove `./.deps/libclamav_la-chmunpack.Plo': Permission denied
rm: cannot remove `./.deps/unrar_iface.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-version.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-strlcpy.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-ole2_extract.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-wwunpack.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-petite.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-phishcheck.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-msexpand.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-elf.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-cvd.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-pdf.Plo': Permission denied
rm: cannot remove `./.deps/unrarhlp.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-scanners.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-rtf.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-cab.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-regcomp.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-mspack.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-upx.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-aspack.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-infblock.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-others_common.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-unzip.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-vba_extract.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-upack.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-phish_whitelist.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-special.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-rebuildpe.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-dconf.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-blob.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-others_common.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-sha256.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-mbox.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-text.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-textnorm.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-mew.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-line.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-regexec.Plo': Permission denied
rm: cannot remove `./.deps/unrarvm.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-str.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-strlcpy.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-readdb.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-fsg.Plo': Permission denied
rm: cannot remove `./.deps/unrarppm.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-table.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-js-norm.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-regfree.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-str.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-regcomp.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-others.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-regex_list.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-nulsft.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-entconv.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-disasm.Plo': Permission denied
rm: cannot remove `./.deps/unrar.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-message.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-regex_suffix.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-uniq.Plo': Permission denied
rm: cannot remove `./.deps/unrarfilter.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-dsig.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-md5.Plo': Permission denied
rm: cannot remove `./.deps/unrarcmd.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-filetypes.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-matcher-bm.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-yc.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-is_tar.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-packlibs.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-hashtab.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-untar.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-dlp.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-matcher.Plo': Permission denied
rm: cannot remove `./.deps/unrar20.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-bignum.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-tnef.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-bzlib.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-uuencode.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-regerror.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-matcher-ac.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-regfree.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-htmlnorm.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-textdet.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-inflate64.Plo': Permission denied
rm: cannot remove `./.deps/unrar15.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-phish_domaincheck_db.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-unsp.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-sis.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_nothreads_la-regexec.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-unarj.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-pe.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-md5.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-explode.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-mpool.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-autoit.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_internal_utils_la-regerror.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-spin.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-lzma_iface.Plo': Permission denied
rm: cannot remove `./.deps/libclamav_la-binhex.Plo': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/libclamav'
Making distclean in libltdl
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg/libltdl'
test -z "libltdl.la libltdlc.la libdlloader.la lt__strl.o lt__strl.lo" || rm -f libltdl.la libltdlc.la libdlloader.la lt__strl.o lt__strl.lo
test -z "" || rm -f
rm -rf .libs _libs
rm: cannot remove `.libs/libltdlc_la-lt__alloc.o': Permission denied
rm: cannot remove `.libs/libltdlc.a': Permission denied
rm: cannot remove `.libs/dlopen.la': Permission denied
rm: cannot remove `.libs/libltdlc_la-ltdl.o': Permission denied
rm: cannot remove `.libs/libltdlc_la-slist.o': Permission denied
rm: cannot remove `.libs/dlopen.o': Permission denied
rm: cannot remove `.libs/libltdlc_la-preopen.o': Permission denied
rm: cannot remove `.libs/dlopen.a': Permission denied
rm: cannot remove `.libs/lt__strl.o': Permission denied
rm: cannot remove `.libs/libltdlc_la-lt_dlloader.o': Permission denied
rm: cannot remove `.libs/libltdlcS.o': Permission denied
rm: cannot remove `.libs/libltdlc_la-lt_error.o': Permission denied
rm: cannot remove `.libs/libltdlc.la': Permission denied
make[2]: [clean-libtool] Error 1 (ignored)
test -z "dlopen.la libltdlc.la" || rm -f dlopen.la libltdlc.la
rm -f "./so_locations"
rm -f "./so_locations"
rm -f *.o
test -z "argz.h argz.h-t" || rm -f argz.h argz.h-t
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm: cannot remove `./.deps/dyld.Plo': Permission denied
rm: cannot remove `./.deps/libltdl_la-slist.Plo': Permission denied
rm: cannot remove `./.deps/libltdl_la-lt_error.Plo': Permission denied
rm: cannot remove `./.deps/dld_link.Plo': Permission denied
rm: cannot remove `./.deps/libltdlc_la-lt_error.Plo': Permission denied
rm: cannot remove `./.deps/libltdl_la-ltdl.Plo': Permission denied
rm: cannot remove `./.deps/libltdlc_la-preopen.Plo': Permission denied
rm: cannot remove `./.deps/libltdlc_la-lt__alloc.Plo': Permission denied
rm: cannot remove `./.deps/libltdl_la-lt_dlloader.Plo': Permission denied
rm: cannot remove `./.deps/libltdl_la-preopen.Plo': Permission denied
rm: cannot remove `./.deps/libltdlc_la-lt_dlloader.Plo': Permission denied
rm: cannot remove `./.deps/shl_load.Plo': Permission denied
rm: cannot remove `./.deps/libltdlc_la-slist.Plo': Permission denied
rm: cannot remove `./.deps/load_add_on.Plo': Permission denied
rm: cannot remove `./.deps/libltdlc_la-ltdl.Plo': Permission denied
rm: cannot remove `./.deps/lt__strl.Plo': Permission denied
rm: cannot remove `./.deps/dlopen.Plo': Permission denied
rm: cannot remove `./.deps/loadlibrary.Plo': Permission denied
rm: cannot remove `./.deps/libltdl_la-lt__alloc.Plo': Permission denied
make[2]: [distclean] Error 1 (ignored)
rm -f Makefile
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg/libltdl'
Making distclean in .
make[2]: Entering directory `/home/user/clamav-0.95.1+dfsg'
rm -rf .libs _libs
rm -f *.lo
test -z "clamav-config libclamav.pc docs/man/clamav-milter.8 docs/man/clamconf.1 docs/man/clamd.8 docs/man/clamd.conf.5 docs/man/clamdscan.1 docs/man/clamscan.1 docs/man/freshclam.1 docs/man/freshclam.conf.5 docs/man/sigtool.1 docs/man/clamdtop.1" || rm -f clamav-config libclamav.pc docs/man/clamav-milter.8 docs/man/clamconf.1 docs/man/clamd.8 docs/man/clamd.conf.5 docs/man/clamdscan.1 docs/man/clamscan.1 docs/man/freshclam.1 docs/man/freshclam.conf.5 docs/man/sigtool.1 docs/man/clamdtop.1
test -z "target.h" || rm -f target.h
rm -f clamav-config.h stamp-h1
rm -f libtool
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory `/home/user/clamav-0.95.1+dfsg'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory `/home/user/clamav-0.95.1+dfsg'
rm -f target.h config.log
rm -f build-arch-stamp build-indep-stamp install-indep-stamp install-arch-stamp build-stamp install-stamp
rm -f debian/clamav-base.config
rm -f debian/clamav-base.postinst
rm -f debian/clamav-daemon.postinst
rm -f debian/clamav-daemon.init
rm -f debian/clamav-milter.init
rm -f debian/clamav-milter.config
rm -f debian/clamav-milter.postinst
rm -f debian/clamav-freshclam.init
rm -f debian/clamav-freshclam.config
rm -f debian/clamav-freshclam.postinst
dh_clean
dpkg-source -b clamav-0.95.1+dfsg
dpkg-source: info: using source format `1.0'
dpkg-source: info: building clamav using existing clamav_0.95.1+dfsg.orig.tar.gz
dpkg-source: info: building clamav in clamav_0.95.1+dfsg-1ubuntu1.2.diff.gz
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc_la-lt__alloc.o: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc.a: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/dlopen.la:
dpkg-source: error: new version is symlink to ../dlopen.la
dpkg-source: error: old version is nonexistent
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc_la-ltdl.o: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc_la-slist.o: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/dlopen.o: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc_la-preopen.o: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/dlopen.a: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/lt__strl.o: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc_la-lt_dlloader.o: binaryfile contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlcS.o: binary file contentschanged
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc_la-lt_error.o: binary file contents changed
dpkg-source: error: cannot represent change to clamav-0.95.1+dfsg/libltdl/.libs/libltdlc.la:
dpkg-source: error: new version is symlink to ../libltdlc.la
dpkg-source: error: old version is nonexistent
dpkg-source: warning: ignoring deletion of file libclamav/version.h
dpkg-source: unrepresentable changes to source
dpkg-buildpackage: failure: dpkg-source -b clamav-0.95.1+dfsg gave error exit status 1


looks like fakeroot is not working! WHY!?!:confused:

EDIT: just sudo it (sorry for using all the space)

[stuffystuff200681]

I've tried with both 0.88.2 (from 'normal' repositories) and 0.88.4 (from backports), but I can't find 'debian' or 'rules'
I new to compiling, so much of this was a walk in dark park for me - i'll bring the flashlght next time...

retief
just type it in the terminal

and you will find it (worked with me anyway

[faizyunus]

Does anybody have those instructions for ubuntu 10.04 karmic koala? TQ

[wyrdrat]

I'd like to use clam to real time scan emails in Thunderbird 3. I understand that clamdrib addon doesn't work in TB3 and I'm getting very confused with Dazuko, DazukoFS and ClamFS.

I'm using 10.04 Lucid. Any pointers?

Thanks

[BarryDocks]

Does this work for file accessed by a windows box via samba share?
Thanks

Sorry, just found this:
http://dazuko.dnsalias.org/wiki/index.php/FAQ#Does_DazukoFS_detect_file_accesses_over_Samba. 2C_Netatalk.2C_and_NFS.3F
:oops:

[BarryDocks]

Having trouble loading the dazuko module on boot and hence nothing works. Running 32bit 9.10:

Have done this:
gedit /etc/modules
and added dazuko

but I then get nothing after the reboot: :~# lsmod | grep dazuko
:~#
I tried adding the following to /etc/modprobe.d/dazuko.conf
install dazuko modprobe -r capability;\
modprobe -i dazuko; \
chmod a+rwx /dev/dazuko; \
modprobe -i capability

And tried changing the chmod line to:chgrp dazuko /dev/dazuko; \

But get:
:~# modprobe dazuko
FATAL: Module capability not found.
FATAL: Module dazuko not found.
chmod: cannot access `/dev/dazuko': No such file or directory
FATAL: Error running install command for dazuko

I also tried the following to the same file, from here http://ubuntuforums.org/showpost.php?p=634418&postcount=13:
install dazuko /sbin/modprobe -r capability;\
/sbin/modprobe --ignore-install dazuko; \
/sbin/modprobe --ignore-install capability

Now I get:
:~# modprobe dazuko
FATAL: Module capability not found.
FATAL: Module dazuko not found.
FATAL: Module capability not found.
FATAL: Error running install command for dazuko


There's got to be something simple I'm missing?](*,)