Monkey-Dude
July 10th, 2005, 07:27 AM
Hi
My quake 3 is acting up. everytime i try to start it, it simply reply's:
Error: GLimp_Init() - could not load OpenGL subsystem
I would realy like to be rid of having to start windows up
everytime i feel like playing a game
My hardware is:
CPU: 2,8 Ghz P4 With HT
RAM: 1024 MB PC3200
GPU: Nvidia Geforce 6600 GT
My software is:
Ubuntu Hoary
Kernel: linux-image-2.6.10-5-686-smp
Nvidia: 1.0 - 7174
My Xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "dk"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 Ultra]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "NoLogo"
EndSection
Section "Monitor"
Identifier "Standard Skærm"
Option "DPMS"
HorizSync 30-65
VertRefresh 50-75
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 Ultra]"
Monitor "Standard Skærm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
The complete "answar" from quake3 is this:
kenneth@Phoenux:~$ quake3
Q3 1.11 linux-i386 Nov 24 1999
----- FS_Startup -----
Current search path:
/home/kenneth/.q3a/baseq3
./baseq3/pak0.pk3 (3539 files)
./baseq3
----------------------
execing default.cfg
execing q3config.cfg
couldn't exec autoexec.cfg
----- Client Initialization -----
----- Initializing Renderer ----
-------------------------------
----- Client Initialization Complete -----
--- Common Initialization Complete ---
Opening IP socket: localhost:27960
Hostname: localhost.localdomain
Alias: localhost
Alias: Phoenux
IP: 127.0.0.1
----- R_Init -----
...loading libGL.so: QGL_Init: Can't load libGL.so from /etc/ld.so.conf or current dir: /usr/local/games/quake3/libGL.so: cannot open shared object file: No such file or directory
failed
...loading libMesaVoodooGL.so: QGL_Init: Can't load libMesaVoodooGL.so from /etc/ld.so.conf or current dir: /usr/local/games/quake3/libMesaVoodooGL.so: cannot open shared object file: No such file or directory
failed
----- CL_Shutdown -----
RE_Shutdown( 1 )
-----------------------
----- CL_Shutdown -----
-----------------------
Error: GLimp_Init() - could not load OpenGL subsystem
Any help will be much apriciated.
My quake 3 is acting up. everytime i try to start it, it simply reply's:
Error: GLimp_Init() - could not load OpenGL subsystem
I would realy like to be rid of having to start windows up
everytime i feel like playing a game
My hardware is:
CPU: 2,8 Ghz P4 With HT
RAM: 1024 MB PC3200
GPU: Nvidia Geforce 6600 GT
My software is:
Ubuntu Hoary
Kernel: linux-image-2.6.10-5-686-smp
Nvidia: 1.0 - 7174
My Xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "dk"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 Ultra]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "NoLogo"
EndSection
Section "Monitor"
Identifier "Standard Skærm"
Option "DPMS"
HorizSync 30-65
VertRefresh 50-75
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 Ultra]"
Monitor "Standard Skærm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x450" "720x400" "640x480" "640x400"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
The complete "answar" from quake3 is this:
kenneth@Phoenux:~$ quake3
Q3 1.11 linux-i386 Nov 24 1999
----- FS_Startup -----
Current search path:
/home/kenneth/.q3a/baseq3
./baseq3/pak0.pk3 (3539 files)
./baseq3
----------------------
execing default.cfg
execing q3config.cfg
couldn't exec autoexec.cfg
----- Client Initialization -----
----- Initializing Renderer ----
-------------------------------
----- Client Initialization Complete -----
--- Common Initialization Complete ---
Opening IP socket: localhost:27960
Hostname: localhost.localdomain
Alias: localhost
Alias: Phoenux
IP: 127.0.0.1
----- R_Init -----
...loading libGL.so: QGL_Init: Can't load libGL.so from /etc/ld.so.conf or current dir: /usr/local/games/quake3/libGL.so: cannot open shared object file: No such file or directory
failed
...loading libMesaVoodooGL.so: QGL_Init: Can't load libMesaVoodooGL.so from /etc/ld.so.conf or current dir: /usr/local/games/quake3/libMesaVoodooGL.so: cannot open shared object file: No such file or directory
failed
----- CL_Shutdown -----
RE_Shutdown( 1 )
-----------------------
----- CL_Shutdown -----
-----------------------
Error: GLimp_Init() - could not load OpenGL subsystem
Any help will be much apriciated.