Rui Sun
June 7th, 2007, 02:55 PM
Hi every one
I'm very new to linux and ubuntu, so excuse me if I sounds like id10t :p
I have setup ubuntu with beryl/emerald on my Desktop computer few times before and it has being working fine. But I just got a new notebook(asus VX2-AK018G) it has geforce go 7700 on it, I installed i386 Festy on this notebook, got the latest kernel 2.6.20-16 installed, I'm using nvidia driver from nvidia web, I'm using IA32 1.0-9755 driver. beryl seems to work fine, no borbut emerald do not load, here is my Xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Feb 26 23:38:46 PST 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 84.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation GeForce Go 7700"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
Option "RenderAccel" "True"
Option "AllowGLXWithComposite" "True"
Option "backingstore" "True"
Option "TripleBuffer" "True"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation GeForce Go 7700"
Monitor "Generic Monitor"
DefaultDepth 16
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 1
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
also when I try to run emerald on terminal here what I get,
emerald: Could not acquire decoration manager selection on screen 0 display ":0.0"
and I have also tried apt-get remove emerald, apt-get clean and apt-get install emerald, and that did nothing. if there is some one using beryl and emerald on VX2-AK018G before and got it working, your help will be much appreciated, and any one can help fix this will also be very much appreciated.
On another topic, my sound don't work too, I never had to trouble shoot sound before on my Desktop for linux, so I have no idea what to do, is using Built-in High Definition Audio compliant audio chip.
thank you ahead
I'm very new to linux and ubuntu, so excuse me if I sounds like id10t :p
I have setup ubuntu with beryl/emerald on my Desktop computer few times before and it has being working fine. But I just got a new notebook(asus VX2-AK018G) it has geforce go 7700 on it, I installed i386 Festy on this notebook, got the latest kernel 2.6.20-16 installed, I'm using nvidia driver from nvidia web, I'm using IA32 1.0-9755 driver. beryl seems to work fine, no borbut emerald do not load, here is my Xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Feb 26 23:38:46 PST 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 84.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation GeForce Go 7700"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
Option "RenderAccel" "True"
Option "AllowGLXWithComposite" "True"
Option "backingstore" "True"
Option "TripleBuffer" "True"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation GeForce Go 7700"
Monitor "Generic Monitor"
DefaultDepth 16
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 1
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
also when I try to run emerald on terminal here what I get,
emerald: Could not acquire decoration manager selection on screen 0 display ":0.0"
and I have also tried apt-get remove emerald, apt-get clean and apt-get install emerald, and that did nothing. if there is some one using beryl and emerald on VX2-AK018G before and got it working, your help will be much appreciated, and any one can help fix this will also be very much appreciated.
On another topic, my sound don't work too, I never had to trouble shoot sound before on my Desktop for linux, so I have no idea what to do, is using Built-in High Definition Audio compliant audio chip.
thank you ahead