zorro26
May 14th, 2007, 09:17 PM
HI GUYS, I AM NEW TO LINUX, WELL HAVE BEEN USING IT FOR FEW MONTHS, INSTALLED IT QUITE FEW TIME, PLAYED AROUND ALOT AND LEARNT ALOT. PROBLEM I AM HAVING IS I TRIED TO MOUNT MY PSP BUT IT WONT WORK, I USE TO MOUNT MY SAMSUNG I300 WHICH USES MASS STORAGE FORMULA USED TO MOUND FOR FEW MINS UNDER TFAT FOLDERS OR SOMETHING BUT THAT NOT HAPPENING NOW.
I SEARCHED UBUNTU, LINUX, PSP FORUMS AND GOOGLED ALOT. I FOLLWED AND DIDT LOADS OF STUFF (I JUST COPY AND PASTE COMANDS IN TERMINAL WITH OUT KNOWING WHAT THEY MEAN).
like these
mount -t vfat /dev/sda /mnt/psp/
but i get this
mount: special device /dev/sda does not exist
CHANGED MY FSTAB FILES LOADS .. NOW IT LOOKS LIKE THIS..
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/hda1
UUID=57a37a62-927c-4715-9cfb-ec1e5639812d / ext3 defaults,errors=remount-ro 0 1
# /dev/hda5
UUID=f8f64f27-3e09-4dd8-8fdc-4968f1ddc584 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0
MY DMESG IS AS FOLLOWING
[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] Command line: root=UUID=57a37a62-927c-4715-9cfb-ec1e5639812d ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff10000 (usable)
[ 0.000000] BIOS-e820: 000000003ff10000 - 000000003ff20000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff20000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261904) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fad60
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000507 MSFT 0x00000097) @ 0x000000003ff10000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x10000507 MSFT 0x00000097) @ 0x000000003ff10200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x10000507 MSFT 0x00000097) @ 0x000000003ff10390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x10000507 MSFT 0x00000097) @ 0x000000003ff20040
[ 0.000000] ACPI: DSDT (v001 A0217 A0217001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ff10000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261904) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff10000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 261904
[ 0.000000] On node 0 totalpages: 261807
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1085 pages reserved
[ 0.000000] DMA zone: 2858 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254284 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257142
[ 0.000000] Kernel command line: root=UUID=57a37a62-927c-4715-9cfb-ec1e5639812d ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 12.538643] Console: colour VGA+ 80x25
[ 12.539718] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 12.540346] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.540440] Checking aperture...
[ 12.540444] CPU 0: aperture @ 9812000000 size 32 MB
[ 12.540446] Aperture too small (32 MB)
[ 12.545809] No AGP bridge found
[ 12.559141] Memory: 1019564k/1047616k available (2217k kernel code, 27664k reserved, 1162k data, 304k init)
[ 12.635510] Calibrating delay using timer specific routine.. 4402.47 BogoMIPS (lpj=8804958)
[ 12.635569] Security Framework v1.0.0 initialized
[ 12.635575] SELinux: Disabled at boot.
[ 12.635601] Mount-cache hash table entries: 256
[ 12.635766] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 12.635768] CPU: L2 Cache: 1024K (64 bytes/line)
[ 12.635771] CPU 0/0 -> Node 0
[ 12.635794] SMP alternatives: switching to UP code
[ 12.636186] Early unpacking initramfs... done
[ 12.940107] ACPI: Core revision 20060707
[ 12.940583] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 12.982825] Using local APIC timer interrupts.
[ 13.028238] result 12501014
[ 13.028240] Detected 12.501 MHz APIC timer.
[ 13.031224] Brought up 1 CPUs
[ 13.031251] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 13.031253] time.c: Detected 2200.178 MHz processor.
[ 13.031548] Time: 0:59:29 Date: 04/15/107
[ 13.031586] NET: Registered protocol family 16
[ 13.031670] ACPI: bus type pci registered
[ 13.031676] PCI: Using configuration type 1
[ 13.037952] ACPI: Interpreter enabled
[ 13.037954] ACPI: Using IOAPIC for interrupt routing
[ 13.038851] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.038855] PCI: Probing PCI hardware (bus 00)
[ 13.039498] Boot video device is 0000:03:00.0
[ 13.039676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.058677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 13.058930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 13.059828] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.060041] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.060251] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.060459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 13.060722] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.060934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.061146] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.061356] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[ 13.061428] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.061435] pnp: PnP ACPI init
[ 13.067522] pnp: PnP ACPI: found 15 devices
[ 13.067571] PCI: Using ACPI for IRQ routing
[ 13.067574] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.067640] NET: Registered protocol family 8
[ 13.067642] NET: Registered protocol family 20
[ 13.068439] pnp: 00:0a: ioport range 0xc00-0xc0f has been reserved
[ 13.068442] pnp: 00:0a: ioport range 0xd00-0xd0f has been reserved
[ 13.068444] pnp: 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 13.068447] pnp: 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 13.068682] PCI: Bridge: 0000:00:01.0
[ 13.068684] IO window: e000-efff
[ 13.068688] MEM window: dff00000-dfffffff
[ 13.068691] PREFETCH window: dc000000-deffffff
[ 13.068695] PCI: Bridge: 0000:00:06.0
[ 13.068697] IO window: d000-dfff
[ 13.068700] MEM window: disabled.
[ 13.068702] PREFETCH window: disabled.
[ 13.068705] PCI: Bridge: 0000:00:07.0
[ 13.068707] IO window: c000-cfff
[ 13.068710] MEM window: disabled.
[ 13.068712] PREFETCH window: disabled.
[ 13.068727] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.068735] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 13.068743] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 13.068805] NET: Registered protocol family 2
[ 13.095204] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 13.095515] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 13.097287] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 13.098169] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.098172] TCP reno registered
[ 13.107257] checking if image is initramfs... it is
[ 13.671335] Freeing initrd memory: 7303k freed
[ 13.678341] audit: initializing netlink socket (disabled)
[ 13.678354] audit(1179190769.096:1): initialized
[ 13.678493] VFS: Disk quotas dquot_6.5.1
[ 13.678511] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.678557] io scheduler noop registered
[ 13.678559] io scheduler anticipatory registered
[ 13.678561] io scheduler deadline registered
[ 13.678571] io scheduler cfq registered (default)
[ 13.738721] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.738746] assign_interrupt_mode Found MSI capability
[ 13.738749] Allocate Port Service[0000:00:01.0:pcie00]
[ 13.758732] Real Time Clock Driver v1.12ac
[ 13.758770] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.758773] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.758885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.759352] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.759506] mice: PS/2 mouse device common for all mice
[ 13.759968] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.760192] input: Macintosh mouse button emulation as /class/input/input0
[ 13.760219] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 13.760223] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 13.760424] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 13.760582] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.760585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.760758] TCP cubic registered
[ 13.760766] NET: Registered protocol family 1
[ 13.760874] ACPI: (supports S0 S1 S3 S4 S5)
[ 13.760909] Magic number: 7:558:961
[ 13.760922] hash matches device ttyb2
[ 13.761028] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 13.761136] Freeing unused kernel memory: 304k freed
[ 13.780019] input: AT Translated Set 2 keyboard as /class/input/input1
[ 14.922542] Capability LSM initialized
[ 14.950861] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 15.426946] SIS5513: IDE controller at PCI slot 0000:00:02.5
[ 15.426971] SIS5513: chipset revision 1
[ 15.426973] SIS5513: not 100% native mode: will probe irqs later
[ 15.426979] SIS5513: SiS965 ATA 133 (2nd gen) controller
[ 15.426991] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 15.427001] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[ 15.427008] Probing IDE interface ide0...
[ 15.455294] usbcore: registered new interface driver usbfs
[ 15.455315] usbcore: registered new interface driver hub
[ 15.455334] usbcore: registered new device driver usb
[ 15.455927] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.509081] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 15.509084] Copyright (c) 1999-2006 Intel Corporation.
[ 15.581643] Floppy drive(s): fd0 is 1.44M
[ 15.625832] FDC 0 is a post-1991 82077
[ 15.724935] hda: Maxtor 6L160P0, ATA DISK drive
[ 16.401702] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 16.423538] Probing IDE interface ide1...
[ 17.163644] hdc: SONY DVD RW DW-G120A, ATAPI CD/DVD-ROM drive
[ 17.839166] ide1 at 0x170-0x177,0x376 on irq 15
[ 17.852329] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 17.852343] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 17.852603] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 17.852617] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfeb8000
[ 17.913280] usb usb1: configuration #1 chosen from 1 choice
[ 17.913423] hub 1-0:1.0: USB hub found
[ 17.913432] hub 1-0:1.0: 3 ports detected
[ 18.019163] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 18.019177] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 18.019296] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 18.019309] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfeb9000
[ 18.081035] usb usb2: configuration #1 chosen from 1 choice
[ 18.081175] hub 2-0:1.0: USB hub found
[ 18.081182] hub 2-0:1.0: 3 ports detected
[ 18.187023] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 18.187036] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 18.187152] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 18.187166] ohci_hcd 0000:00:03.2: irq 22, io mem 0xdfeba000
[ 18.248937] usb usb3: configuration #1 chosen from 1 choice
[ 18.249085] hub 3-0:1.0: USB hub found
[ 18.249093] hub 3-0:1.0: 2 ports detected
[ 18.360641] SCSI subsystem initialized
[ 18.365563] libata version 2.20 loaded.
[ 18.372807] sata_sis 0000:00:05.0: version 0.7
[ 18.372833] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 18.372847] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
[ 18.372914] ata1: SATA max UDMA/133 cmd 0x000000000001b400 ctl 0x000000000001b002 bmdma 0x000000000001a000 irq 17
[ 18.372944] ata2: SATA max UDMA/133 cmd 0x000000000001a800 ctl 0x000000000001a402 bmdma 0x000000000001a008 irq 17
[ 18.372960] scsi0 : sata_sis
[ 18.380060] hda: max request size: 512KiB
[ 18.385519] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[ 18.395927] hda: cache flushes supported
[ 18.395971] hda: hda1 hda2 < hda5 >
[ 18.446185] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 18.446192] Uniform CD-ROM driver Revision: 3.20
[ 18.570410] Attempting manual resume
[ 18.570414] swsusp: Resume From Partition 3:5
[ 18.570415] PM: Checking swsusp image.
[ 18.570519] PM: Resume from disk failed.
[ 18.582914] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 18.582918] EXT3-fs: write access will be enabled during recovery.
[ 20.584431] ata1: SATA link down (SStatus 1 SControl 300)
[ 20.595008] ATA: abnormal status 0x7F on port 0x000000000001b407
[ 20.595047] scsi1 : sata_sis
[ 22.319900] kjournald starting. Commit interval 5 seconds
[ 22.319913] EXT3-fs: recovery complete.
[ 22.322843] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.802444] ata2: SATA link down (SStatus 1 SControl 300)
[ 22.813021] ATA: abnormal status 0x7F on port 0x000000000001a807
[ 22.813811] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 23.063612] e1000: 0000:00:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:15:f2:4f:e2:10
[ 23.102889] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 23.102997] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 23.103006] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 23.103029] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 23.103065] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 23.103076] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdfebb000
[ 23.103083] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.103156] usb usb4: configuration #1 chosen from 1 choice
[ 23.103179] hub 4-0:1.0: USB hub found
[ 23.103185] hub 4-0:1.0: 8 ports detected
[ 31.646880] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 32.939156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.000334] NET: Registered protocol family 17
[ 33.250705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.279883] input: PC Speaker as /class/input/input2
[ 33.421572] parport: PnPBIOS parport detected.
[ 33.421614] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.525389] logips2pp: Detected unknown logitech mouse model 1
[ 33.623931] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 33.709227] input: PS/2 Logitech Mouse as /class/input/input3
[ 33.944457] intel8x0_measure_ac97_clock: measured 55792 usecs
[ 33.944460] intel8x0: clocking to 48000
[ 34.093878] fuse init (API version 7.8)
[ 34.115151] lp0: using parport0 (interrupt-driven).
[ 34.157944] Adding 3004112k swap on /dev/disk/by-uuid/f8f64f27-3e09-4dd8-8fdc-4968f1ddc584. Priority:-1 extents:1 across:3004112k
[ 34.272425] EXT3 FS on hda1, internal journal
[ 38.769132] NET: Registered protocol family 10
[ 38.769223] lo: Disabled Privacy Extensions
[ 41.805027] Using specific hotkey driver
[ 41.822829] No dock devices found.
[ 41.853159] input: Power Button (FF) as /class/input/input4
[ 41.856788] ACPI: Power Button (FF) [PWRF]
[ 41.879768] input: Power Button (CM) as /class/input/input5
[ 41.883350] ACPI: Power Button (CM) [PWRB]
[ 41.969888] ibm_acpi: ec object not found
[ 42.010174] pcc_acpi: loading...
[ 42.223683] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (version 2.00.00)
[ 42.223731] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
[ 42.223734] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
[ 42.223736] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 42.223738] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 45.321735] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 45.327624] [fglrx] Maximum main memory to use for locked dma buffers: 921 MBytes.
[ 45.327863] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 45.588663] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.003054] ppdev: user-space parallel port driver
[ 48.902423] [fglrx] total GART = 130023424
[ 48.902429] [fglrx] free GART = 114032640
[ 48.902431] [fglrx] max single GART = 114032640
[ 48.902433] [fglrx] total LFB = 33423360
[ 48.902435] [fglrx] free LFB = 21884928
[ 48.902437] [fglrx] max single LFB = 21884928
[ 48.902438] [fglrx] total Inv = 0
[ 48.902439] [fglrx] free Inv = 0
[ 48.902441] [fglrx] max single Inv = 0
[ 48.902442] [fglrx] total TIM = 0
[ 51.730903] Bluetooth: Core ver 2.11
[ 51.730940] NET: Registered protocol family 31
[ 51.730941] Bluetooth: HCI device and connection manager initialized
[ 51.730944] Bluetooth: HCI socket layer initialized
[ 51.779015] Bluetooth: L2CAP ver 2.8
[ 51.779018] Bluetooth: L2CAP socket layer initialized
[ 51.898146] Bluetooth: RFCOMM socket layer initialized
[ 51.898156] Bluetooth: RFCOMM TTY layer initialized
[ 51.898157] Bluetooth: RFCOMM ver 1.8
[ 55.340546] eth0: no IPv6 routers present
[ 160.817770] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 162.260130] usb 3-2: device descriptor read/64, error -110
[ 164.850506] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 166.374605] usb 3-2: new full speed USB device using ohci_hcd and address 4
[ 167.816958] usb 3-2: device descriptor read/64, error -110
[ 171.962292] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 173.404637] usb 2-2: device descriptor read/64, error -110
[ 181.691907] usb 2-2: device descriptor read/64, error -110
[ 181.819065] usb 2-2: new full speed USB device using ohci_hcd and address 3
[ 183.259578] usb 2-2: device descriptor read/64, error -110
[ 191.998616] usb 2-2: device descriptor read/64, error -110
[ 192.125774] usb 2-2: new full speed USB device using ohci_hcd and address 4
[ 194.407572] usb 2-2: device descriptor read/8, error -110
[ 196.732691] usb 2-2: device descriptor read/8, error -110
[ 196.859637] usb 2-2: new full speed USB device using ohci_hcd and address 5
[ 199.139558] usb 2-2: device descriptor read/8, error -110
[ 201.464691] usb 2-2: device descriptor read/8, error -110
CAN SOMEONE BE PATIENT ENOUGH TO HELP ME WITH SLOW STEPS STARTING FROM STEP ONE..
I SEARCHED UBUNTU, LINUX, PSP FORUMS AND GOOGLED ALOT. I FOLLWED AND DIDT LOADS OF STUFF (I JUST COPY AND PASTE COMANDS IN TERMINAL WITH OUT KNOWING WHAT THEY MEAN).
like these
mount -t vfat /dev/sda /mnt/psp/
but i get this
mount: special device /dev/sda does not exist
CHANGED MY FSTAB FILES LOADS .. NOW IT LOOKS LIKE THIS..
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/hda1
UUID=57a37a62-927c-4715-9cfb-ec1e5639812d / ext3 defaults,errors=remount-ro 0 1
# /dev/hda5
UUID=f8f64f27-3e09-4dd8-8fdc-4968f1ddc584 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0
MY DMESG IS AS FOLLOWING
[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] Command line: root=UUID=57a37a62-927c-4715-9cfb-ec1e5639812d ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff10000 (usable)
[ 0.000000] BIOS-e820: 000000003ff10000 - 000000003ff20000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff20000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261904) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fad60
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000507 MSFT 0x00000097) @ 0x000000003ff10000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x10000507 MSFT 0x00000097) @ 0x000000003ff10200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x10000507 MSFT 0x00000097) @ 0x000000003ff10390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x10000507 MSFT 0x00000097) @ 0x000000003ff20040
[ 0.000000] ACPI: DSDT (v001 A0217 A0217001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ff10000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261904) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff10000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 261904
[ 0.000000] On node 0 totalpages: 261807
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1085 pages reserved
[ 0.000000] DMA zone: 2858 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254284 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257142
[ 0.000000] Kernel command line: root=UUID=57a37a62-927c-4715-9cfb-ec1e5639812d ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 12.538643] Console: colour VGA+ 80x25
[ 12.539718] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 12.540346] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.540440] Checking aperture...
[ 12.540444] CPU 0: aperture @ 9812000000 size 32 MB
[ 12.540446] Aperture too small (32 MB)
[ 12.545809] No AGP bridge found
[ 12.559141] Memory: 1019564k/1047616k available (2217k kernel code, 27664k reserved, 1162k data, 304k init)
[ 12.635510] Calibrating delay using timer specific routine.. 4402.47 BogoMIPS (lpj=8804958)
[ 12.635569] Security Framework v1.0.0 initialized
[ 12.635575] SELinux: Disabled at boot.
[ 12.635601] Mount-cache hash table entries: 256
[ 12.635766] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 12.635768] CPU: L2 Cache: 1024K (64 bytes/line)
[ 12.635771] CPU 0/0 -> Node 0
[ 12.635794] SMP alternatives: switching to UP code
[ 12.636186] Early unpacking initramfs... done
[ 12.940107] ACPI: Core revision 20060707
[ 12.940583] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 12.982825] Using local APIC timer interrupts.
[ 13.028238] result 12501014
[ 13.028240] Detected 12.501 MHz APIC timer.
[ 13.031224] Brought up 1 CPUs
[ 13.031251] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 13.031253] time.c: Detected 2200.178 MHz processor.
[ 13.031548] Time: 0:59:29 Date: 04/15/107
[ 13.031586] NET: Registered protocol family 16
[ 13.031670] ACPI: bus type pci registered
[ 13.031676] PCI: Using configuration type 1
[ 13.037952] ACPI: Interpreter enabled
[ 13.037954] ACPI: Using IOAPIC for interrupt routing
[ 13.038851] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.038855] PCI: Probing PCI hardware (bus 00)
[ 13.039498] Boot video device is 0000:03:00.0
[ 13.039676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.058677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 13.058930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 13.059828] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.060041] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.060251] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.060459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 13.060722] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.060934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.061146] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.061356] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[ 13.061428] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.061435] pnp: PnP ACPI init
[ 13.067522] pnp: PnP ACPI: found 15 devices
[ 13.067571] PCI: Using ACPI for IRQ routing
[ 13.067574] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.067640] NET: Registered protocol family 8
[ 13.067642] NET: Registered protocol family 20
[ 13.068439] pnp: 00:0a: ioport range 0xc00-0xc0f has been reserved
[ 13.068442] pnp: 00:0a: ioport range 0xd00-0xd0f has been reserved
[ 13.068444] pnp: 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 13.068447] pnp: 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 13.068682] PCI: Bridge: 0000:00:01.0
[ 13.068684] IO window: e000-efff
[ 13.068688] MEM window: dff00000-dfffffff
[ 13.068691] PREFETCH window: dc000000-deffffff
[ 13.068695] PCI: Bridge: 0000:00:06.0
[ 13.068697] IO window: d000-dfff
[ 13.068700] MEM window: disabled.
[ 13.068702] PREFETCH window: disabled.
[ 13.068705] PCI: Bridge: 0000:00:07.0
[ 13.068707] IO window: c000-cfff
[ 13.068710] MEM window: disabled.
[ 13.068712] PREFETCH window: disabled.
[ 13.068727] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.068735] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 13.068743] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 13.068805] NET: Registered protocol family 2
[ 13.095204] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 13.095515] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 13.097287] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 13.098169] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.098172] TCP reno registered
[ 13.107257] checking if image is initramfs... it is
[ 13.671335] Freeing initrd memory: 7303k freed
[ 13.678341] audit: initializing netlink socket (disabled)
[ 13.678354] audit(1179190769.096:1): initialized
[ 13.678493] VFS: Disk quotas dquot_6.5.1
[ 13.678511] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.678557] io scheduler noop registered
[ 13.678559] io scheduler anticipatory registered
[ 13.678561] io scheduler deadline registered
[ 13.678571] io scheduler cfq registered (default)
[ 13.738721] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.738746] assign_interrupt_mode Found MSI capability
[ 13.738749] Allocate Port Service[0000:00:01.0:pcie00]
[ 13.758732] Real Time Clock Driver v1.12ac
[ 13.758770] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.758773] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.758885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.759352] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.759506] mice: PS/2 mouse device common for all mice
[ 13.759968] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.760192] input: Macintosh mouse button emulation as /class/input/input0
[ 13.760219] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 13.760223] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 13.760424] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 13.760582] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.760585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.760758] TCP cubic registered
[ 13.760766] NET: Registered protocol family 1
[ 13.760874] ACPI: (supports S0 S1 S3 S4 S5)
[ 13.760909] Magic number: 7:558:961
[ 13.760922] hash matches device ttyb2
[ 13.761028] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 13.761136] Freeing unused kernel memory: 304k freed
[ 13.780019] input: AT Translated Set 2 keyboard as /class/input/input1
[ 14.922542] Capability LSM initialized
[ 14.950861] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 15.426946] SIS5513: IDE controller at PCI slot 0000:00:02.5
[ 15.426971] SIS5513: chipset revision 1
[ 15.426973] SIS5513: not 100% native mode: will probe irqs later
[ 15.426979] SIS5513: SiS965 ATA 133 (2nd gen) controller
[ 15.426991] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 15.427001] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[ 15.427008] Probing IDE interface ide0...
[ 15.455294] usbcore: registered new interface driver usbfs
[ 15.455315] usbcore: registered new interface driver hub
[ 15.455334] usbcore: registered new device driver usb
[ 15.455927] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.509081] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 15.509084] Copyright (c) 1999-2006 Intel Corporation.
[ 15.581643] Floppy drive(s): fd0 is 1.44M
[ 15.625832] FDC 0 is a post-1991 82077
[ 15.724935] hda: Maxtor 6L160P0, ATA DISK drive
[ 16.401702] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 16.423538] Probing IDE interface ide1...
[ 17.163644] hdc: SONY DVD RW DW-G120A, ATAPI CD/DVD-ROM drive
[ 17.839166] ide1 at 0x170-0x177,0x376 on irq 15
[ 17.852329] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 17.852343] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 17.852603] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 17.852617] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfeb8000
[ 17.913280] usb usb1: configuration #1 chosen from 1 choice
[ 17.913423] hub 1-0:1.0: USB hub found
[ 17.913432] hub 1-0:1.0: 3 ports detected
[ 18.019163] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 18.019177] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 18.019296] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 18.019309] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfeb9000
[ 18.081035] usb usb2: configuration #1 chosen from 1 choice
[ 18.081175] hub 2-0:1.0: USB hub found
[ 18.081182] hub 2-0:1.0: 3 ports detected
[ 18.187023] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 18.187036] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 18.187152] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 18.187166] ohci_hcd 0000:00:03.2: irq 22, io mem 0xdfeba000
[ 18.248937] usb usb3: configuration #1 chosen from 1 choice
[ 18.249085] hub 3-0:1.0: USB hub found
[ 18.249093] hub 3-0:1.0: 2 ports detected
[ 18.360641] SCSI subsystem initialized
[ 18.365563] libata version 2.20 loaded.
[ 18.372807] sata_sis 0000:00:05.0: version 0.7
[ 18.372833] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 18.372847] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
[ 18.372914] ata1: SATA max UDMA/133 cmd 0x000000000001b400 ctl 0x000000000001b002 bmdma 0x000000000001a000 irq 17
[ 18.372944] ata2: SATA max UDMA/133 cmd 0x000000000001a800 ctl 0x000000000001a402 bmdma 0x000000000001a008 irq 17
[ 18.372960] scsi0 : sata_sis
[ 18.380060] hda: max request size: 512KiB
[ 18.385519] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[ 18.395927] hda: cache flushes supported
[ 18.395971] hda: hda1 hda2 < hda5 >
[ 18.446185] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 18.446192] Uniform CD-ROM driver Revision: 3.20
[ 18.570410] Attempting manual resume
[ 18.570414] swsusp: Resume From Partition 3:5
[ 18.570415] PM: Checking swsusp image.
[ 18.570519] PM: Resume from disk failed.
[ 18.582914] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 18.582918] EXT3-fs: write access will be enabled during recovery.
[ 20.584431] ata1: SATA link down (SStatus 1 SControl 300)
[ 20.595008] ATA: abnormal status 0x7F on port 0x000000000001b407
[ 20.595047] scsi1 : sata_sis
[ 22.319900] kjournald starting. Commit interval 5 seconds
[ 22.319913] EXT3-fs: recovery complete.
[ 22.322843] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.802444] ata2: SATA link down (SStatus 1 SControl 300)
[ 22.813021] ATA: abnormal status 0x7F on port 0x000000000001a807
[ 22.813811] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 23.063612] e1000: 0000:00:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:15:f2:4f:e2:10
[ 23.102889] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 23.102997] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 23.103006] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 23.103029] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 23.103065] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 23.103076] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdfebb000
[ 23.103083] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.103156] usb usb4: configuration #1 chosen from 1 choice
[ 23.103179] hub 4-0:1.0: USB hub found
[ 23.103185] hub 4-0:1.0: 8 ports detected
[ 31.646880] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 32.939156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.000334] NET: Registered protocol family 17
[ 33.250705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.279883] input: PC Speaker as /class/input/input2
[ 33.421572] parport: PnPBIOS parport detected.
[ 33.421614] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.525389] logips2pp: Detected unknown logitech mouse model 1
[ 33.623931] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 33.709227] input: PS/2 Logitech Mouse as /class/input/input3
[ 33.944457] intel8x0_measure_ac97_clock: measured 55792 usecs
[ 33.944460] intel8x0: clocking to 48000
[ 34.093878] fuse init (API version 7.8)
[ 34.115151] lp0: using parport0 (interrupt-driven).
[ 34.157944] Adding 3004112k swap on /dev/disk/by-uuid/f8f64f27-3e09-4dd8-8fdc-4968f1ddc584. Priority:-1 extents:1 across:3004112k
[ 34.272425] EXT3 FS on hda1, internal journal
[ 38.769132] NET: Registered protocol family 10
[ 38.769223] lo: Disabled Privacy Extensions
[ 41.805027] Using specific hotkey driver
[ 41.822829] No dock devices found.
[ 41.853159] input: Power Button (FF) as /class/input/input4
[ 41.856788] ACPI: Power Button (FF) [PWRF]
[ 41.879768] input: Power Button (CM) as /class/input/input5
[ 41.883350] ACPI: Power Button (CM) [PWRB]
[ 41.969888] ibm_acpi: ec object not found
[ 42.010174] pcc_acpi: loading...
[ 42.223683] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (version 2.00.00)
[ 42.223731] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
[ 42.223734] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
[ 42.223736] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 42.223738] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 45.321735] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 45.327624] [fglrx] Maximum main memory to use for locked dma buffers: 921 MBytes.
[ 45.327863] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 45.588663] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.003054] ppdev: user-space parallel port driver
[ 48.902423] [fglrx] total GART = 130023424
[ 48.902429] [fglrx] free GART = 114032640
[ 48.902431] [fglrx] max single GART = 114032640
[ 48.902433] [fglrx] total LFB = 33423360
[ 48.902435] [fglrx] free LFB = 21884928
[ 48.902437] [fglrx] max single LFB = 21884928
[ 48.902438] [fglrx] total Inv = 0
[ 48.902439] [fglrx] free Inv = 0
[ 48.902441] [fglrx] max single Inv = 0
[ 48.902442] [fglrx] total TIM = 0
[ 51.730903] Bluetooth: Core ver 2.11
[ 51.730940] NET: Registered protocol family 31
[ 51.730941] Bluetooth: HCI device and connection manager initialized
[ 51.730944] Bluetooth: HCI socket layer initialized
[ 51.779015] Bluetooth: L2CAP ver 2.8
[ 51.779018] Bluetooth: L2CAP socket layer initialized
[ 51.898146] Bluetooth: RFCOMM socket layer initialized
[ 51.898156] Bluetooth: RFCOMM TTY layer initialized
[ 51.898157] Bluetooth: RFCOMM ver 1.8
[ 55.340546] eth0: no IPv6 routers present
[ 160.817770] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 162.260130] usb 3-2: device descriptor read/64, error -110
[ 164.850506] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 166.374605] usb 3-2: new full speed USB device using ohci_hcd and address 4
[ 167.816958] usb 3-2: device descriptor read/64, error -110
[ 171.962292] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 173.404637] usb 2-2: device descriptor read/64, error -110
[ 181.691907] usb 2-2: device descriptor read/64, error -110
[ 181.819065] usb 2-2: new full speed USB device using ohci_hcd and address 3
[ 183.259578] usb 2-2: device descriptor read/64, error -110
[ 191.998616] usb 2-2: device descriptor read/64, error -110
[ 192.125774] usb 2-2: new full speed USB device using ohci_hcd and address 4
[ 194.407572] usb 2-2: device descriptor read/8, error -110
[ 196.732691] usb 2-2: device descriptor read/8, error -110
[ 196.859637] usb 2-2: new full speed USB device using ohci_hcd and address 5
[ 199.139558] usb 2-2: device descriptor read/8, error -110
[ 201.464691] usb 2-2: device descriptor read/8, error -110
CAN SOMEONE BE PATIENT ENOUGH TO HELP ME WITH SLOW STEPS STARTING FROM STEP ONE..