soundsfromsound
January 17th, 2013, 08:38 PM
Hello.
I recently have installed Ubuntu Server 12.10 on my LAN here and it's working fine as far as within my home network, but I cannot connect to the web anymore. I'm not sure what happened, but I was originally able to install applications, ping websites, etc but now I'm offline it seems. I can ping websites but only when I use the IP address, fyi. I can't figure it out because I was able to use the web no problem and recently it just stopped. Did I mess up DNS or something?
Thank you for your help. Here are some snippets:
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0c:29:01:ca:22
inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe01:ca22/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3913 errors:0 dropped:0 overruns:0 frame:0
TX packets:3330 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:643607 (643.6 KB) TX bytes:1314518 (1.3 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5808 errors:0 dropped:0 overruns:0 frame:0
TX packets:5808 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1070212 (1.0 MB) TX bytes:1070212 (1.0 MB)
route -n
ben@userver:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.13
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 8.8.8.8
I recently have installed Ubuntu Server 12.10 on my LAN here and it's working fine as far as within my home network, but I cannot connect to the web anymore. I'm not sure what happened, but I was originally able to install applications, ping websites, etc but now I'm offline it seems. I can ping websites but only when I use the IP address, fyi. I can't figure it out because I was able to use the web no problem and recently it just stopped. Did I mess up DNS or something?
Thank you for your help. Here are some snippets:
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0c:29:01:ca:22
inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe01:ca22/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3913 errors:0 dropped:0 overruns:0 frame:0
TX packets:3330 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:643607 (643.6 KB) TX bytes:1314518 (1.3 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5808 errors:0 dropped:0 overruns:0 frame:0
TX packets:5808 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1070212 (1.0 MB) TX bytes:1070212 (1.0 MB)
route -n
ben@userver:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.13
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 8.8.8.8