View Full Version : [SOLVED] display resolution
mashavecher
March 20th, 2012, 06:34 PM
Hi.
Need help very much. I've installed ubuntu on toshiba satellite l755-a2w, I have display resolution 800*600, while it' capable of 1366*768. How do I set it properly?
And one more thing my fan seems to have gone mad, heating and running full speed
IWantFroyo
March 20th, 2012, 06:36 PM
Go to the "Display" or "Monitors" application, and change the resolution from there.
mashavecher
March 20th, 2012, 06:50 PM
The problem is that in there I only have two options 640*480 and 800*600
sudodus
March 20th, 2012, 06:54 PM
Hi mashavecher
I think you have problems with the graphics driver. What is your graphics chip? And what is your graphics driver?
Edit: Run the command
gksudo lshw>lshw.txt
and look at the output with for example
less lshw.txt and look for the chapter about display for the hardware
And run the command
glxinfo|grep -i opengl for the software. Install glxinfo if necessary with
sudo apt-get install mesa-utils
mashavecher
March 20th, 2012, 07:00 PM
NVIDIA GeForce GT 525M
Where do I look for the driver?
sudodus
March 20th, 2012, 07:14 PM
NVIDIA GeForce GT 525M
Where do I look for the driver?
With nvidia you should use the graphics driver, that is offered via the internal tool for proprietary drivers. Then it should work. I run nvidia without problems. GeForce GT 525M should perform quite well. See the edit in my previous post howto find out about the current driver.
You can run
jockey-gtk to start the GUI application that offers proprietary drivers.
mashavecher
March 20th, 2012, 07:27 PM
proprietary drivers offers nothing, says no proprietary drivers are in use on this system.
sudodus
March 20th, 2012, 07:43 PM
proprietary drivers offers nothing, says no proprietary drivers are in use on this system.
gksudo lshw>lshw.txt and nothing happens, no output.
Maybe lshw is not installed, try to run it with
gksudo lshw and if it fails install with
sudo apt-get install lshw
Which version of Ubuntu are you running?
mashavecher
March 20th, 2012, 08:00 PM
Maybe lshw is not installed, try to run it with
gksudo lshw and if it fails install with
sudo apt-get install lshw
Which version of Ubuntu are you running?
10.04 install says newest version, then
gksudo lshw>lshw.txt asked for pswd in GUI window, which then disappeared and again no output
I've tried to place output of
less lshw.txt from computer running ubuntu, but I get connection reset by server. I'm writing from my MacBook.
I need ubuntu to run special software for my science
mashavecher
March 20th, 2012, 10:00 PM
I know it's not the best way, but I have just installed 11.10 and everything looks beautiful.
I just need linux to run ARB.
Thank's anyway for help
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.