PDA

View Full Version : [ubuntu] Random Jack failure or user error



pepsifx357
November 12th, 2011, 08:23 PM
I cut off my computer last night which was running a generic kernel and jackd version 0.118.0. We were recording last night with no problems.

I wake up this morning to find jack constantly failing. I've had the normal problems setting jack up, but this one is different.

Here's the output.


14:15:29.158 Patchbay deactivated.
14:15:29.160 Statistics reset.
14:15:29.170 ALSA connection graph change.
14:15:29.367 ALSA connection change.
14:15:56.881 Startup script...
14:15:56.882 artsshell -q terminate
sh: artsshell: not found
14:15:57.284 Startup script terminated with exit status=32512.
14:15:57.284 JACK is starting...
14:15:57.285 /usr/bin/jackd -r -dalsa -dhw:0 -r44100 -p1024 -n2 -s
jackd 0.118.0
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
14:15:57.292 JACK was started with PID=6741.
no message buffer overruns
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|soft-mode|32bit
control device hw:0
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
14:15:59.347 Server configuration saved to "/home/ben/.jackdrc".
14:15:59.348 Statistics reset.
14:15:59.349 Client activated.
14:15:59.357 JACK connection change.
14:15:59.360 JACK connection graph change.
ALSA: poll time out, polled for 34862333 usecs
DRIVER NT: could not run driver cycle
14:16:32.168 JACK connection graph change.
jack main caught signal 12
cannot continue execution of the processing graph (Broken pipe)
cannot continue execution of the processing graph (Broken pipe)
14:16:32.186 Client deactivated.
cannot continue execution of the pro
14:16:32.187 JACK was stopped successfully.
14:16:32.188 Post-shutdown script...
14:16:32.188 killall jackd
cessing graph (Broken pipe)
cannot continue execution of the processing graph (Broken pipe)
cannot continue execution of the processing graph (Broken pipe)
14:16:32.614 Post-shutdown script terminated with exit status=256.
cannot continue execution of the processing graph (Broken pipe)
cannot continue execution of the processing graph (Broken pipe)
jackd: no process found

For the forum's sake, I remove the hundreds of lines that said "cannot continue execution of the processing graph (Broken pipe)"

Can anyone help me out? The card is an RME HDSP MADI and this is Ubuntu 10.04 desktop.

lshw:


ben@DAW:~$ sudo lshw -C multimedia
[sudo] password for ben:
*-multimedia
description: Multimedia audio controller
product: RME Hammerfall DSP MADI
vendor: Xilinx Corporation
physical id: 7
bus info: pci@0000:04:07.0
version: cf
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=RME Hammerfall DSP MADI latency=64
resources: irq:19 memory:dbff0000-dbffffff


/etc/security/limit.conf



ben@DAW:~$ sudo cat /etc/security/limits.conf
# /etc/security/limits.conf
#
#Each line describes a limit for a user in the form:
#
#<domain> <type> <item> <value>
#
#Where:
#<domain> can be:
# - an user name
# - a group name, with @group syntax
# - the wildcard *, for default entry
# - the wildcard %, can be also used with %group syntax,
# for maxlogin limit
# - NOTE: group and wildcard limits are not applied to root.
# To apply a limit to the root user, <domain> must be
# the literal username root.
#
#<type> can have the two values:
# - "soft" for enforcing the soft limits
# - "hard" for enforcing hard limits
#
#<item> can be one of the following:
# - core - limits the core file size (KB)
# - data - max data size (KB)
# - fsize - maximum filesize (KB)
# - memlock - max locked-in-memory address space (KB)
# - nofile - max number of open files
# - rss - max resident set size (KB)
# - stack - max stack size (KB)
# - cpu - max CPU time (MIN)
# - nproc - max number of processes
# - as - address space limit (KB)
# - maxlogins - max number of logins for this user
# - maxsyslogins - max number of logins on the system
# - priority - the priority to run user process with
# - locks - max number of file locks the user can hold
# - sigpending - max number of pending signals
# - msgqueue - max memory used by POSIX message queues (bytes)
# - nice - max nice priority allowed to raise to values: [-20, 19]
# - rtprio - max realtime priority
# - chroot - change root to directory (Debian-specific)
#
#<domain> <type> <item> <value>
#

#* soft core 0
#root hard core 100000
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#ftp - chroot /ftp
#@student - maxlogins 4
@realtime - rtprio 99
@realtime - memlock unlimited
#@realtime - nice -10
# End of file