jadeye
July 15th, 2011, 08:43 AM
Hey guys....
Working my way through understanding LINUX.
I still consider myself a newbie.
I recently installed a 10.04 server with LAMP and others onit.
I wish to get it surfing the net: apt-get update and install webmin.
My SETUP:
Ubuntu 10.04 PC
Ubuntu 10.04 SERVER
PC connects to www through WiFi:
netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags Iface
10.0.0.0 * 255.255.255.0 U wlan0
192.168.122.0 * 255.255.255.0 U eth0
link-local * 255.255.0.0 U eth0
ifconfig -a
eth0 Link encap:Ethernet HWaddr 6c:f0:49:c1:20:48
inet addr:192.168.122.100 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::6ef0:49ff:fec1:2048/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:40 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:3654 (3.6 KB) TX bytes:3666 (3.6 KB)
Interrupt:27
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:62051 errors:0 dropped:0 overruns:0 frame:0
TX packets:62051 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:568917887 (568.9 MB) TX bytes:568917887 (568.9 MB)
wlan0 Link encap:Ethernet HWaddr 00:1f:1f:3c:f5:37
inet addr:10.0.0.4 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::21f:1fff:fe3c:f537/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:445534 errors:0 dropped:0 overruns:0 frame:0
TX packets:311288 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:594104219 (594.1 MB) TX bytes:43179501 (43.1 MB)
SERVER connects:
Destination Gateway Genmask Flags Iface
192.168.122.0 * 255.255.255.0 U eth0
default 192.168.122.100 0.0.0.0 UG eth0
WHEN I PING FROM SERVER:
ping 10.0.0.4 - GOOD
ping 192.168.122.100 - GOOD
ping -b 192.168.122.253 OR 0 - GOOD
in /etc/network/interface:
I defined Gateway as 192.168.122.100
What am I doing wrong?
I am not that great with networks...
Does anyone have any idea how to get the SERVER to get to the internet through the PC?
They see each other, the server sees the ip given by the WWW router to the PC but he does not exit through it...
I did some experimenting here trying to replace the gateway with all sorts but with no luck...
Tried:
up route add -net 10.0.0.0 netmask 255.255.255.0 gw 192.168.122.253 (=router static ip)
How to fixit?
Thanx.
Working my way through understanding LINUX.
I still consider myself a newbie.
I recently installed a 10.04 server with LAMP and others onit.
I wish to get it surfing the net: apt-get update and install webmin.
My SETUP:
Ubuntu 10.04 PC
Ubuntu 10.04 SERVER
PC connects to www through WiFi:
netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags Iface
10.0.0.0 * 255.255.255.0 U wlan0
192.168.122.0 * 255.255.255.0 U eth0
link-local * 255.255.0.0 U eth0
ifconfig -a
eth0 Link encap:Ethernet HWaddr 6c:f0:49:c1:20:48
inet addr:192.168.122.100 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::6ef0:49ff:fec1:2048/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:40 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:3654 (3.6 KB) TX bytes:3666 (3.6 KB)
Interrupt:27
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:62051 errors:0 dropped:0 overruns:0 frame:0
TX packets:62051 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:568917887 (568.9 MB) TX bytes:568917887 (568.9 MB)
wlan0 Link encap:Ethernet HWaddr 00:1f:1f:3c:f5:37
inet addr:10.0.0.4 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::21f:1fff:fe3c:f537/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:445534 errors:0 dropped:0 overruns:0 frame:0
TX packets:311288 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:594104219 (594.1 MB) TX bytes:43179501 (43.1 MB)
SERVER connects:
Destination Gateway Genmask Flags Iface
192.168.122.0 * 255.255.255.0 U eth0
default 192.168.122.100 0.0.0.0 UG eth0
WHEN I PING FROM SERVER:
ping 10.0.0.4 - GOOD
ping 192.168.122.100 - GOOD
ping -b 192.168.122.253 OR 0 - GOOD
in /etc/network/interface:
I defined Gateway as 192.168.122.100
What am I doing wrong?
I am not that great with networks...
Does anyone have any idea how to get the SERVER to get to the internet through the PC?
They see each other, the server sees the ip given by the WWW router to the PC but he does not exit through it...
I did some experimenting here trying to replace the gateway with all sorts but with no luck...
Tried:
up route add -net 10.0.0.0 netmask 255.255.255.0 gw 192.168.122.253 (=router static ip)
How to fixit?
Thanx.