PDA

View Full Version : [SOLVED] Is my computer in overheat?



mellouli
June 15th, 2011, 05:44 PM
I have a hp compact 6830s laptop with ubuntu natty 11.4 i386 installed in
I noticed that my fan runs all the time and doesn't stop at all only if (and that's extremely rare) when the temperature of cpus is 38 C
in terminal

ubuntu@natty:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +49.0C (crit = +110.0C)
temp2: +45.0C (crit = +256.0C)
temp3: +50.0C (crit = +112.0C)
temp4: +53.0C (crit = +105.0C)
temp5: +30.3C (crit = +112.0C)
temp6: +50.0C (crit = +110.0C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +47.0C (high = +105.0C, crit = +105.0C)
Core 1: +45.0C (high = +105.0C, crit = +105.0C)
and


ubuntu@natty:~$ top

top - 17:41:50 up 2:26, 3 users, load average: 0.11, 0.14, 0.14
Tasks: 159 total, 1 running, 156 sleeping, 0 stopped, 2 zombie
Cpu(s): 10.8%us, 4.3%sy, 0.0%ni, 82.7%id, 2.2%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3062628k total, 2049372k used, 1013256k free, 49936k buffers
Swap: 0k total, 0k used, 0k free, 1524984k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1445 ubuntu 20 0 247m 42m 10m S 10 1.4 7:09.46 compiz
1447 ubuntu 9 -11 158m 8092 6704 S 6 0.3 6:30.77 pulseaudio
994 root 20 0 105m 67m 38m S 5 2.2 29:48.57 Xorg
1660 ubuntu 20 0 578m 176m 23m S 3 5.9 17:58.51 firefox-bin
8579 ubuntu 20 0 94700 10m 7028 S 3 0.4 0:07.36 gnome-terminal
8885 ubuntu 20 0 303m 92m 58m S 2 3.1 5:28.41 vlc
1428 ubuntu 20 0 115m 8964 4636 S 1 0.3 0:11.33 gnome-settings-
1466 ubuntu 20 0 134m 27m 11m S 1 0.9 0:21.21 nautilus
1709 ubuntu 20 0 180m 25m 12m S 1 0.8 13:42.02 plugin-containe
872 root 20 0 18020 1220 532 S 1 0.0 0:05.70 gdm-binary
1416 ubuntu 20 0 5308 2300 520 S 1 0.1 0:04.74 dbus-daemon
1421 ubuntu 20 0 9632 3088 1092 S 1 0.1 0:02.91 gconfd-2
1745 ubuntu 20 0 51200 2664 1688 S 1 0.1 0:05.72 unity-files-dae
8878 ubuntu 20 0 19052 8756 7164 S 1 0.3 0:28.05 xsensors
11090 ubuntu 20 0 6272 1788 1384 S 1 0.1 0:04.71 wget
11 root -2 19 0 0 0 S 0 0.0 0:22.21 rcuc1 And i noticed in any version of windows (and after using linux I hate windows so much)
the temperature doesn't surpass 36 c and my laptop is calm
what can I do

pqwoerituytrueiwoq
June 15th, 2011, 06:04 PM
check the temp when you are using classic ubuntu
http://scottlinux.com/2011/03/05/ubuntu-11-04-change-from-unity-to-classic-gnome/
does the fan sound louder when you run windows on it?

StrayEddy
June 15th, 2011, 06:14 PM
Control your fans ;)

http://ubuntumanual.org/posts/127/how-to-control-fan-speed-lm-sensors-in-ubuntu

or

http://www.garryconn.com/linux/how-to-control-cpu-and-case-fan-speeds-on-a-linux-server/

mellouli
June 15th, 2011, 06:22 PM
check the temp when you are using classic ubuntu
http://scottlinux.com/2011/03/05/ubuntu-11-04-change-from-unity-to-classic-gnome/
does the fan sound louder when you run windows on it?
yeah i tried every single one before i even installed LXDE and the same problem :sad:
I have known ubuntu since lucid and the same problem percist i386 or amd64
and the fan sound of windows is as loud as ubuntu but for 5 minutes maximum 8 minutes and then it's quiet

mellouli
June 15th, 2011, 06:30 PM
Control your fans ;)

http://ubuntumanual.org/posts/127/how-to-control-fan-speed-lm-sensors-in-ubuntu

or

http://www.garryconn.com/linux/how-to-control-cpu-and-case-fan-speeds-on-a-linux-server/
I tried pwmconfig and that's the result

ubuntu@natty:~$ sudo pwmconfig
# pwmconfig revision 5857 (2010-08-22)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/local/sbin/pwmconfig: There are no pwm-capable sensor modules installed


Iknow how to control my fans using

echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:00/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:0a/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:01/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:02/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:03/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:04/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:05/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:06/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:07/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:08/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:09/thermal_cooling/cur_state

but them the laptop became hotter and reaches 60 C
the fan start spinning automatically louder then usual and then as usual
and stuck in the same speed and doesn't stop at all :(

mellouli
June 15th, 2011, 07:40 PM
what can i do???

Quackers
June 15th, 2011, 07:44 PM
For the moment I would suggest not using Ubuntu, until a fix can be found. You don't want to cook your pc!
Maybe trying some boot options, like noapic, nolapic or acpi=off might help (or others). Read here for how to do that
http://ubuntuforums.org/showthread.php?t=1613132

Try first running the live cd with boot options and see if things improve.

mellouli
June 15th, 2011, 07:52 PM
For the moment I would suggest not using Ubuntu, until a fix can be found. You don't want to cook your pc!
Maybe trying some boot options, like noapic, nolapic or acpi=off might help (or others). Read here for how to do that
http://ubuntuforums.org/showthread.php?t=1613132

Try first running the live cd with boot options and see if things improve.
that seemed interesting but i didn't understand how to use it and he's talking about nvidia but i have ati radeon hd 3430 I'm a bigginer in ubuntu and i don't wanna stop using it
please help me

Quackers
June 15th, 2011, 07:58 PM
The link largely talks about the nomodeset option.
You won't need that one, but the noapic, nolapic and acpi=off options are used in the same way.
If you read the whole thread you will see that boot options like these can be used for various purposes. They can be used to boot a live cd or an installed system, but the process is slightly different.

mellouli
June 15th, 2011, 08:43 PM
The link largely talks about the nomodeset option.
You won't need that one, but the noapic, nolapic and acpi=off options are used in the same way.
If you read the whole thread you will see that boot options like these can be used for various purposes. They can be used to boot a live cd or an installed system, but the process is slightly different.
when i tried that look what top gave me

ubuntu@natty:~$ top

top - 20:41:54 up 1 min, 2 users, load average: 1.81, 0.77, 0.28
Tasks: 144 total, 1 running, 142 sleeping, 0 stopped, 1 zombie
Cpu(s): 1.5%us, 14.8%sy, 0.0%ni, 83.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3062628k total, 343100k used, 2719528k free, 27808k buffers
Swap: 0k total, 0k used, 0k free, 138836k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
13 root 20 0 0 0 0 S 27 0.0 0:20.10 kworker/0:1
1025 root 20 0 34548 16m 6004 S 3 0.6 0:01.80 Xorg
1480 ubuntu 20 0 248m 42m 20m S 2 1.4 0:02.14 compiz
1695 ubuntu 20 0 93608 13m 10m S 1 0.5 0:00.49 gnome-terminal
1754 ubuntu 20 0 2632 1140 860 R 1 0.0 0:00.04 top
1495 ubuntu 20 0 120m 17m 12m S 0 0.6 0:00.67 nautilus
1 root 20 0 3012 1832 1276 S 0 0.1 0:01.38 init
2 root 20 0 0 0 0 S 0 0.0 0:00.16 kthreadd
3 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/0
4 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/0:0
5 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/u:0
6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
7 root -2 19 0 0 0 S 0 0.0 0:00.63 rcuc0
8 root RT 0 0 0 0 S 0 0.0 0:00.00 rcun0
9 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1
10 root 20 0 0 0 0 S 0 0.0 0:00.02 kworker/1:0
11 root -2 19 0 0 0 S 0 0.0 0:00.16 rcuc1
what's that kworker that takes 27 percent of my cpu

Jacobonbuntu
June 15th, 2011, 09:44 PM
....the "normal" temperature of your processor (s) depends on the type of processor!!
on the internet you will probably find the normal temerature of yours. Older AMD processors can get pretty hot.

If it is too hot, you should probably check your cooler "ribs" (don't know the English word for it) if they are not coverered with dust! I 've had this several times, after cleaning everything was ok.

edit:
oops, that's probably not it, I didn't read the post well...

mellouli
June 15th, 2011, 10:06 PM
....the "normal" temperature of your processor (s) depends on the type of processor!!
on the internet you will probably find the normal temerature of yours. Older AMD processors can get pretty hot.

If it is too hot, you should probably check your cooler "ribs" (don't know the English word for it) if they are not coverered with dust! I 've had this several times, after cleaning everything was ok.

edit:
oops, that's probably not it, I didn't read the post well...
no i have a core 2 duo intel 2.1 ghz and i clean the dust every week
but like i said in windows the temperature don't go greater than 36 and the fan is quiet:confused:

Jacobonbuntu
June 15th, 2011, 10:15 PM
no i have a core 2 duo intel 2.1 ghz and i clean the dust every week
but like i said in windows the temperature don't go greater than 36 and the fan is quiet:confused:

I once had a problem like this with an onboard videocard (running Windows XP). Fan was always blowing, and my cpu busy for 25% or so. I switched my videocard (for other reasons) and my cpu was "unemployed" since then.
I am afraid it is no use for you.....

mellouli
June 15th, 2011, 10:33 PM
I once had a problem like this with an onboard videocard (running Windows XP). Fan was always blowing, and my cpu busy for 25% or so. I switched my videocard (for other reasons) and my cpu was "unemployed" since then.
I am afraid it is no use for you.....
but my VGA is ATI Radeon hd 3430
and i have the driver installed in ubuntu
and it works fine with windows xp and the fan cpu is quiet

pqwoerituytrueiwoq
June 15th, 2011, 10:36 PM
maybe windows is set to not run the cpu at full speed

Jacobonbuntu
June 15th, 2011, 10:50 PM
AHA,
that is a brillant thought, specially as we are dealing with a laptop!

mellouli
June 15th, 2011, 11:08 PM
maybe windows is set to not run the cpu at full speed
so what can i do ](*,)

pqwoerituytrueiwoq
June 15th, 2011, 11:12 PM
check the power management settings in windows and see if it is limiting the core speed
if it is below 100% that is why ubuntu runs hotterer
i would edit ondemand and change ondemand to conservative
alt+f2
gksudo gedit /etc/init.d/ondemand

line 27 has
echo -n ondemand > $CPUFREQ
change it to
echo -n conservative > $CPUFREQ

mellouli
June 16th, 2011, 12:12 AM
check the power management settings in windows and see if it is limiting the core speed
if it is below 100% that is why ubuntu runs hotterer
i would edit ondemand and change ondemand to conservative
alt+f2
gksudo gedit /etc/init.d/ondemand

line 27 has
echo -n ondemand > $CPUFREQ
change it to
echo -n conservative > $CPUFREQ
yeah that worked a little

ubuntu@natty:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +44.0C (crit = +110.0C)
temp2: +31.0C (crit = +256.0C)
temp3: +44.0C (crit = +112.0C)
temp4: +46.0C (crit = +105.0C)
temp5: +28.3C (crit = +112.0C)
temp6: +50.0C (crit = +110.0C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +41.0C (high = +105.0C, crit = +105.0C)
Core 1: +40.0C (high = +105.0C, crit = +105.0C)


and that after changing back to gnome classic
but the fan doen't stop

mellouli
June 16th, 2011, 12:39 AM
i installed powertop look what it gave me it might be important
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254263_1864456008859_1164769270_31760178_2076227_n .jpg

mellouli
June 16th, 2011, 01:10 AM
this one has more details


Cn Avg residency P-states (frequencies)
C0 (cpu running) ( 5.1%) Turbo Mode 0.0%
polling 0.0ms ( 0.0%) 2.10 Ghz 0.0%
C1 mwait 0.4ms ( 1.2%) 1.60 Ghz 0.0%
C4 mwait 2.8ms (93.6%) 1200 Mhz 100.0%



Wakeups-from-idle per second : 370.6 interval: 10.0s
no ACPI power usage estimate available

Top causes for wakeups:
33.9% (189.2) [Rescheduling interrupts] <kernel IPI>
11.8% ( 65.9) [extra timer interrupt]
10.8% ( 60.3) [radeon] <interrupt>
7.8% ( 43.3) [ata_piix, ehci_hcd:usb1, ehci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb5, uhci_hcd:usb6, uhci_hcd:usb7, uhci_hcd:usb8] <interrupt>
7.8% ( 43.3) USB device 8-1 : USB OPTICAL MOUSE ()
5.5% ( 30.7) [kernel scheduler] Load balancing tick
3.7% ( 20.8) firefox-bin
3.7% ( 20.5) kworker/0:0
3.4% ( 18.9) [iwlagn] <interrupt>
2.2% ( 12.1) compiz
1.9% ( 10.7) [acpi] <interrupt>
1.9% ( 10.6) Xorg
1.4% ( 8.0) [kernel core] usb_hcd_poll_rh_status (rh_timer_func)
0.8% ( 4.3) [Function call interrupts] <kernel IPI>
0.6% ( 3.6) [kernel core] hrtimer_start (tick_sched_timer)
0.6% ( 3.6) xsensors
0.6% ( 3.4) [ata_piix] <interrupt>
0.4% ( 2.0) multiload-apple
0.3% ( 1.4) sensors-applet
0.2% ( 1.0) cpufreq-applet
0.2% ( 1.0) [kernel core] start_rt_bandwidth (sched_rt_period_timer)
0.1% ( 0.5) udisks-daemon
0.1% ( 0.4) [TLB shootdowns] <kernel IPI>
0.1% ( 0.3) gnome-settings-
0.0% ( 0.2) lxterminal
0.0% ( 0.2) gnome-panel
0.0% ( 0.2) update-notifier
0.0% ( 0.1) PS/2 keyboard/mouse/touchpad interrupt
Suggestion: Enable USB autosuspend for non-input devices by pressing the U key

Jacobonbuntu
June 16th, 2011, 07:08 AM
....just for the record...
just checked my laptop, (pentium T2390) , temperature varies from 43-56! your values (your cpu's :)) seems not to be very high.
I also found this, maybe you can experiment with limitating the cpu frequency if you want to stay cool :)

http://askubuntu.com/questions/30334/list-of-application-indicators
(CPUFreq) (https://launchpad.net/indicator-cpufreq)

mellouli
June 16th, 2011, 10:22 PM
....just for the record...
just checked my laptop, (pentium T2390) , temperature varies from 43-56! your values (your cpu's :)) seems not to be very high.
I also found this, maybe you can experiment with limitating the cpu frequency if you want to stay cool :)

http://askubuntu.com/questions/30334/list-of-application-indicators
(CPUFreq) (https://launchpad.net/indicator-cpufreq)
Maybe the temperature of my laptop isn't high but why the fan doesn't stop automatically :confused::confused:

Jacobonbuntu
June 16th, 2011, 11:05 PM
I checked...
My fan almost never slows down when I use my laptop (Natty), the same with my son's laptop (running Windows 7... )
I am not sure, I can imagine it does not feel comfortable, but I think it doesn't harm. The difference in your case with Windows is strange.
Apart from that, usually in the bios is defined that the computer shuts down at a certain temperature to prevent damage, if the fan is broken for example. You can probably change the values, but I guess the default values will be a good choice...

mellouli
June 17th, 2011, 12:38 AM
I checked...
My fan almost never slows down when I use my laptop (Natty), the same with my son's laptop (running Windows 7... )
I am not sure, I can imagine it does not feel comfortable, but I think it doesn't harm. The difference in your case with Windows is strange.
Apart from that, usually in the bios is defined that the computer shuts down at a certain temperature to prevent damage, if the fan is broken for example. You can probably change the values, but I guess the default values will be a good choice...
But there is an other problem the battery life become too short when the fan doesn't stop that's why I wanna a solution:(

jtarin
June 17th, 2011, 01:38 AM
What drivers have you installed for your video card? fglrx or proprietary?

|{urse
June 17th, 2011, 05:52 AM
38c is an absolutely ok temp.

Jacobonbuntu
June 17th, 2011, 06:39 AM
But there is an other problem the battery life become too short when the fan doesn't stop that's why I wanna a solution:(


maybe it is a good thing to make sure your system is not occupied with some odd processes; an overheated system can only be overheated by doing a lot of work. I use the system monitor indicator:
https://launchpad.net/indicator-sysmonitor/+download
if your system is not occupied if you don't actually work on it, we can assume everything is ok. (in my case 01-05%)
In that case I would just reduce the processor-speed when running on batteries.

If your system is occupied when unused, I am curious what happens if you switch from fglrx to proprietary video card driver (or vice versa) as jtarin suggests. In my experience video cards are the first suspect in compatibility issues with Linux.

mellouli
June 18th, 2011, 01:51 AM
What drivers have you installed for your video card? fglrx or proprietary?
I tried to install fglrx but after installing it shows me a message fglrx could not be installed or upgraded report that problem and the driver was ati 11.6 x86
and while installing it shows me dmks failed or something like that
i followed the indicated instructors in this site but nothing worked
:(:(:(:(

http://wiki.cchtml.com/index.php/Ubuntu_Natty_Installation_Guide

and that's why I'm using xorg-edgers repository the open source driver
https://launchpad.net/~xorg-edgers/+archive/ppa

sammiev
June 18th, 2011, 02:05 AM
My dual cores run at about 38c while my i5 runs about 44c to 52c. My fan is usually slow to off but can speed about to med or high on high processor speeds for a length of time. GL :)

jtarin
June 18th, 2011, 02:08 AM
I tried to install fglrx but after installing it shows me a message fglrx could not be installed or upgraded report that problem and the driver was ati 11.6 x86
and while installing it shows me dmks failed or something like that
i followed the indicated instructors in this site but nothing worked
:(:(:(:(

http://wiki.cchtml.com/index.php/Ubuntu_Natty_Installation_Guide

and that's why I'm using xorg-edgers repository the open source driver
https://launchpad.net/~xorg-edgers/+archive/ppaRun the command
lspci and post the results.

pqwoerituytrueiwoq
June 18th, 2011, 02:14 AM
Run the command
lspci and post the results.
how about
sudo hwinfo --all > ~/Desktop/hwinfo.txt also
the output will not fit in terminal window without using the less command so i made it dump it to a file on the desktop that you can attach (may need to be compressed)
that should tell us everything from bios version to your dvd drive

mellouli
June 18th, 2011, 02:35 AM
Run the command
lspci and post the results.
here it is


ubuntu@natty:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Device 95c2
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
86:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller

mellouli
June 18th, 2011, 02:38 AM
how about
sudo hwinfo --all > ~/Desktop/hwinfo.txt also
the output will not fit in terminal window without using the less command so i made it dump it to a file on the desktop that you can attach (may need to be compressed)
that should tell us everything from bios version to your dvd drive
there it is

01: None 00.0: 10105 BIOS
[Created at bios.190]
Unique ID: rdCR.lZF+r4EgHp4
Hardware Class: bios
BIOS Keyboard LED Status:
Scroll Lock: off
Num Lock: off
Caps Lock: off
Parallel Port 0: 0x378
Base Memory: 639 kB
PnP BIOS: @D@3C00
SMBIOS Version: 2.4
BIOS Info: #10
Vendor: "Hewlett-Packard"
Version: "68PZD Ver. F.13"
Date: "12/06/2010"
Start Address: 0xf0000
ROM Size: 2048 kB
Features: 0x0783000000003c099980
PCI supported
PCMCIA supported
BIOS flashable
BIOS shadowing allowed
CD boot supported
Selectable boot supported
EDD spec supported
Print Screen supported
8042 Keyboard Services supported
Serial Services supported
Printer Services supported
ACPI supported
USB Legacy supported
Smart Battery supported
BIOS Boot Spec supported
F12 Network boot supported
System Info: #11
Manufacturer: "Hewlett-Packard"
Product: "HP Compaq 6830s"
Version: "F.13"
Serial: "CNU9122PCY"
UUID: undefined, but settable
Wake-up: 0x06 (Power Switch)
Board Info: #12
Manufacturer: "Hewlett-Packard"
Product: "30E9"
Version: "KBC Version 95.1D"
Serial: "CNU9122PCY"
Type: 0x01 (Other)
Features: 0x09
Hosting Board
Replaceable
Chassis: #13
Chassis Info: #13
Manufacturer: "Hewlett-Packard"
Serial: "CNU9122PCY"
Type: 0x0a (Notebook)
Bootup State: 0x03 (Safe)
Power Supply State: 0x03 (Safe)
Thermal State: 0x01 (Other)
Security Status: 0x01 (Other)
Processor Info: #0
Socket: "Intel(R) Genuine processor"
Socket Type: 0x04 (ZIF Socket)
Socket Status: Populated
Type: 0x03 (CPU)
Family: 0x01 (Other)
Manufacturer: "Intel(R) Corporation"
Version: "Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz"
Asset Tag: "Intel(R) Genuine processor"
Processor ID: 0xbfebfbff0001067a
Status: 0x01 (Enabled)
Voltage: 1.6 V
External Clock: 200 MHz
Max. Speed: 2100 MHz
Current Speed: 1300 MHz
L1 Cache: #3
L2 Cache: #1
Cache Info: #1
Designation: "Internal Cache"
Level: L2
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x05 (Unified)
Associativity: 0x07 (8-way Set-Associative)
Max. Size: 2048 kB
Current Size: 2048 kB
Supported SRAM Types: 0x0040 (Asynchronous)
Current SRAM Type: 0x0040 (Asynchronous)
Cache Info: #3
Designation: "Internal Cache"
Level: L1
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x04 (Data)
Associativity: 0x07 (8-way Set-Associative)
Max. Size: 32 kB
Current Size: 32 kB
Supported SRAM Types: 0x0040 (Asynchronous)
Current SRAM Type: 0x0040 (Asynchronous)
Cache Info: #2
Designation: "Internal Cache"
Level: L1
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x03 (Instruction)
Associativity: 0x07 (8-way Set-Associative)
Max. Size: 32 kB
Current Size: 32 kB
Supported SRAM Types: 0x0040 (Asynchronous)
Current SRAM Type: 0x0040 (Asynchronous)
System Slot: #16
Designation: "PCI SLOT1"
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x03 (Available)
Length: 0x04 (Long)
Slot ID: 1
Characteristics: 0x0504 (3.3 V, PME#)
OEM Strings: #15
ABS 70/71 79 7A 7B 7C
CSM v01.30
www.hp.com
Physical Memory Array: #4
Use: 0x03 (System memory)
Location: 0x03 (Motherboard)
Slots: 2
Max. Size: 8 GB
ECC: 0x03 (None)
Memory Device: #5
Location: "Top"
Bank: "BANK 0"
Manufacturer: "7F7F7F8300000000"
Serial: "00000000"
Asset Tag: "Unknown"
Memory Array: #4
Form Factor: 0x0d (SODIMM)
Type: 0x13 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 64 bits
Size: 2 GB
Speed: 667 MHz
Memory Device: #7
Location: "Bottom"
Bank: "BANK 2"
Manufacturer: "Hynix"
Serial: "00001060"
Asset Tag: "Unknown"
Part Number: "HYMP125S64CP8-S6"
Memory Array: #4
Form Factor: 0x0d (SODIMM)
Type: 0x13 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 64 bits
Size: 2 GB
Speed: 667 MHz
Memory Array Mapping: #9
Memory Array: #4
Partition Width: 2
Start Address: 0x0000000000000000
End Address: 0x0000000100000000
Memory Device Mapping: #6
Memory Device: #5
Array Mapping: #9
Row: 1
Interleave Pos: 1
Interleaved Depth: 1
Start Address: 0x00000000
End Address: 0x80000000
Memory Device Mapping: #8
Memory Device: #7
Array Mapping: #9
Row: 1
Interleave Pos: 2
Interleaved Depth: 1
Start Address: 0x00000000
End Address: 0x80000000
Type 22 Record: #17
Data 00: 16 1a 11 00 01 02 03 04 05 02 30 11 40 38 06 ff
Data 10: ab 04 54 3a 07 01 00 00 00 00
String 1: "Primary"
String 2: "STL-SOG6F"
String 3: "3A54"
String 4: "04AB"
String 5: "DD08063"
String 6: "1.1"
String 7: "LION"
Type 32 Record: #14
Data 00: 20 14 0e 00 00 00 00 00 00 00 00 00 00 00 00 00
Data 10: 00 00 00 00
Type 129 Record: #18
Data 00: 81 08 12 00 01 01 02 00
String 1: "Intel_ASF"
String 2: "Intel_ASF_001"
Type 130 Record: #19
Data 00: 82 14 13 00 24 41 4d 54 01 00 00 00 00 a5 0b 02
Data 10: 00 00 00 00
Config Status: cfg=new, avail=yes, need=no, active=unknown

02: None 00.0: 10107 System
[Created at sys.63]
Unique ID: rdCR.n_7QNeEnh23
Hardware Class: system
Model: "System"
Driver Info #0:
Driver Status: thermal,fan are not active
Driver Activation Cmd: "modprobe thermal; modprobe fan"
Config Status: cfg=new, avail=yes, need=no, active=unknown

03: None 00.0: 10104 FPU
[Created at misc.192]
Unique ID: rdCR.EMpH5pjcahD
Hardware Class: unknown
Model: "FPU"
I/O Ports: 0xf0-0xff (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

04: None 00.0: 0801 DMA controller (8237)
[Created at misc.206]
Unique ID: rdCR.f5u1ucRm+H9
Hardware Class: unknown
Model: "DMA controller"
I/O Ports: 0x00-0xcf7 (rw)
I/O Ports: 0xc0-0xdf (rw)
I/O Ports: 0x80-0x8f (rw)
DMA: 4
Config Status: cfg=new, avail=yes, need=no, active=unknown

05: None 00.0: 0800 PIC (8259)
[Created at misc.219]
Unique ID: rdCR.8uRK7LxiIA2
Hardware Class: unknown
Model: "PIC"
I/O Ports: 0x20-0x21 (rw)
I/O Ports: 0xa0-0xa1 (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

06: None 00.0: 0802 Timer (8254)
[Created at misc.230]
Unique ID: rdCR.AJKleuxpiP0
Hardware Class: unknown
Model: "Timer"
IRQ: 0 (1085429 events)
Config Status: cfg=new, avail=yes, need=no, active=unknown

07: None 00.0: 0900 Keyboard controller
[Created at misc.251]
Unique ID: rdCR.9N+EecqykME
Hardware Class: unknown
Model: "Keyboard controller"
I/O Port: 0x60 (rw)
I/O Port: 0x64 (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

08: None 00.0: 0701 Parallel controller (SPP)
[Created at misc.262]
Unique ID: YMnp.ecK7NLYWZ5D
Hardware Class: unknown
Model: "Parallel controller"
Device File: /dev/lp0
I/O Ports: 0x378-0x37a (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

09: None 00.0: 10400 PS/2 Controller
[Created at misc.304]
Unique ID: rdCR.DziBbWO85o5
Hardware Class: unknown
Model: "PS/2 Controller"
Config Status: cfg=new, avail=yes, need=no, active=unknown

12: None 00.0: 10102 Main Memory
[Created at memory.61]
Unique ID: rdCR.CxwsZFjVASF
Hardware Class: memory
Model: "Main Memory"
Memory Range: 0x00000000-0xbaef2fff (rw)
Memory Size: 3 GB
Config Status: cfg=new, avail=yes, need=no, active=unknown

13: PCI 00.0: 0600 Host bridge
[Created at pci.318]
Unique ID: qLht.ssqrsnbd70F
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: "Intel Mobile 4 Series Chipset Memory Controller Hub"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2a40 "Mobile 4 Series Chipset Memory Controller Hub"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x07
Module Alias: "pci:v00008086d00002A40sv0000103Csd000030E9bc06sc00 i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

14: PCI 01.0: 0604 PCI bridge (Normal decode)
[Created at pci.318]
Unique ID: vSkL.R7YROTkYTtB
SysFS ID: /devices/pci0000:00/0000:00:01.0
SysFS BusID: 0000:00:01.0
Hardware Class: bridge
Model: "Intel Mobile 4 Series Chipset PCI Express Graphics Port"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2a41 "Mobile 4 Series Chipset PCI Express Graphics Port"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x07
Driver: "pcieport"
IRQ: 40 (no events)
Module Alias: "pci:v00008086d00002A41sv0000103Csd000030E9bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is not active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown

15: PCI 1a.0: 0c03 USB Controller (UHCI)
[Created at pci.318]
Unique ID: pwJ7.90z7LDeS0N3
SysFS ID: /devices/pci0000:00/0000:00:1a.0
SysFS BusID: 0000:00:1a.0
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #4"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2937 "82801I (ICH9 Family) USB UHCI Controller #4"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0x80a0-0x80bf (rw)
IRQ: 16 (130 events)
Module Alias: "pci:v00008086d00002937sv0000103Csd000030E9bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

16: PCI 1a.1: 0c03 USB Controller (UHCI)
[Created at pci.318]
Unique ID: gFpy.gQvtpnl9Yl3
SysFS ID: /devices/pci0000:00/0000:00:1a.1
SysFS BusID: 0000:00:1a.1
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #5"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2938 "82801I (ICH9 Family) USB UHCI Controller #5"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0x8080-0x809f (rw)
IRQ: 17 (no events)
Module Alias: "pci:v00008086d00002938sv0000103Csd000030E9bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

17: PCI 1a.2: 0c03 USB Controller (UHCI)
[Created at pci.318]
Unique ID: XaIo.BrrdIMts384
SysFS ID: /devices/pci0000:00/0000:00:1a.2
SysFS BusID: 0000:00:1a.2
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #6"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2939 "82801I (ICH9 Family) USB UHCI Controller #6"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0x8060-0x807f (rw)
IRQ: 18 (51969 events)
Module Alias: "pci:v00008086d00002939sv0000103Csd000030E9bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

18: PCI 1a.7: 0c03 USB Controller (EHCI)
[Created at pci.318]
Unique ID: sClz.E5H318jkA7A
SysFS ID: /devices/pci0000:00/0000:00:1a.7
SysFS BusID: 0000:00:1a.7
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x293c "82801I (ICH9 Family) USB2 EHCI Controller #2"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "ehci_hcd"
Driver Modules: "ehci_hcd"
Memory Range: 0xd8504400-0xd85047ff (rw,non-prefetchable)
IRQ: 19 (27 events)
Module Alias: "pci:v00008086d0000293Csv0000103Csd000030E9bc0Csc03 i20"
Driver Info #0:
Driver Status: ehci-hcd is not active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

19: PCI 1b.0: 0403 Audio device
[Created at pci.318]
Unique ID: u1Nb.wXIM0qkt4J2
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Intel 82801I (ICH9 Family) HD Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x293e "82801I (ICH9 Family) HD Audio Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3605
Revision: 0x03
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xd8500000-0xd8503fff (rw,non-prefetchable)
IRQ: 49 (2383 events)
Module Alias: "pci:v00008086d0000293Esv0000103Csd00003605bc04sc03 i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown

20: PCI 1c.0: 0604 PCI bridge (Normal decode)
[Created at pci.318]
Unique ID: z8Q3.6XhEowSpRr2
SysFS ID: /devices/pci0000:00/0000:00:1c.0
SysFS BusID: 0000:00:1c.0
Hardware Class: bridge
Model: "Intel 82801I (ICH9 Family) PCI Express Port 1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2940 "82801I (ICH9 Family) PCI Express Port 1"
Revision: 0x03
Driver: "pcieport"
IRQ: 41 (no events)
Module Alias: "pci:v00008086d00002940sv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is not active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown

21: PCI 1c.1: 0604 PCI bridge (Normal decode)
[Created at pci.318]
Unique ID: qTvu.8Makl3iDVc3
SysFS ID: /devices/pci0000:00/0000:00:1c.1
SysFS BusID: 0000:00:1c.1
Hardware Class: bridge
Model: "Intel 82801I (ICH9 Family) PCI Express Port 2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2942 "82801I (ICH9 Family) PCI Express Port 2"
Revision: 0x03
Driver: "pcieport"
IRQ: 42 (no events)
Module Alias: "pci:v00008086d00002942sv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is not active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown

22: PCI 1c.2: 0604 PCI bridge (Normal decode)
[Created at pci.318]
Unique ID: hoOk.ABTEjCxdYN4
SysFS ID: /devices/pci0000:00/0000:00:1c.2
SysFS BusID: 0000:00:1c.2
Hardware Class: bridge
Model: "Intel 82801I (ICH9 Family) PCI Express Port 3"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2944 "82801I (ICH9 Family) PCI Express Port 3"
Revision: 0x03
Driver: "pcieport"
IRQ: 43 (no events)
Module Alias: "pci:v00008086d00002944sv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is not active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown

23: PCI 1c.4: 0604 PCI bridge (Normal decode)
[Created at pci.318]
Unique ID: QSNP.ErEEeUPSfv5
SysFS ID: /devices/pci0000:00/0000:00:1c.4
SysFS BusID: 0000:00:1c.4
Hardware Class: bridge
Model: "Intel 82801I (ICH9 Family) PCI Express Port 5"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2948 "82801I (ICH9 Family) PCI Express Port 5"
Revision: 0x03
Driver: "pcieport"
IRQ: 44 (no events)
Module Alias: "pci:v00008086d00002948sv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is not active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown

24: PCI 1c.5: 0604 PCI bridge (Normal decode)
[Created at pci.318]
Unique ID: HnsE.Gg7kbdesig6
SysFS ID: /devices/pci0000:00/0000:00:1c.5
SysFS BusID: 0000:00:1c.5
Hardware Class: bridge
Model: "Intel 82801I (ICH9 Family) PCI Express Port 6"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x294a "82801I (ICH9 Family) PCI Express Port 6"
Revision: 0x03
Driver: "pcieport"
IRQ: 45 (no events)
Module Alias: "pci:v00008086d0000294Asv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is not active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=new, avail=yes, need=no, active=unknown

25: PCI 1d.0: 0c03 USB Controller (UHCI)
[Created at pci.318]
Unique ID: 1GTX.cm7uuZx6Re3
SysFS ID: /devices/pci0000:00/0000:00:1d.0
SysFS BusID: 0000:00:1d.0
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2934 "82801I (ICH9 Family) USB UHCI Controller #1"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0x8040-0x805f (rw)
IRQ: 20 (2 events)
Module Alias: "pci:v00008086d00002934sv0000103Csd000030E9bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

26: PCI 1d.1: 0c03 USB Controller (UHCI)
[Created at pci.318]
Unique ID: vayM.7B4eN83qy04
SysFS ID: /devices/pci0000:00/0000:00:1d.1
SysFS BusID: 0000:00:1d.1
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2935 "82801I (ICH9 Family) USB UHCI Controller #2"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0x8020-0x803f (rw)
IRQ: 22 (no events)
Module Alias: "pci:v00008086d00002935sv0000103Csd000030E9bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

27: PCI 1d.2: 0c03 USB Controller (UHCI)
[Created at pci.318]
Unique ID: mvRC.eb0OsiAXUP4
SysFS ID: /devices/pci0000:00/0000:00:1d.2
SysFS BusID: 0000:00:1d.2
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #3"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2936 "82801I (ICH9 Family) USB UHCI Controller #3"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0x8000-0x801f (rw)
IRQ: 18 (51969 events)
Module Alias: "pci:v00008086d00002936sv0000103Csd000030E9bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is not active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

28: PCI 1d.7: 0c03 USB Controller (EHCI)
[Created at pci.318]
Unique ID: 5YuN.CGOZ3+TK7M9
SysFS ID: /devices/pci0000:00/0000:00:1d.7
SysFS BusID: 0000:00:1d.7
Hardware Class: usb controller
Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x293a "82801I (ICH9 Family) USB2 EHCI Controller #1"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "ehci_hcd"
Driver Modules: "ehci_hcd"
Memory Range: 0xd8504000-0xd85043ff (rw,non-prefetchable)
IRQ: 20 (2 events)
Module Alias: "pci:v00008086d0000293Asv0000103Csd000030E9bc0Csc03 i20"
Driver Info #0:
Driver Status: ehci-hcd is not active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=new, avail=yes, need=no, active=unknown

29: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
[Created at pci.318]
Unique ID: 6NW+.IGWbx9KFJQ9
SysFS ID: /devices/pci0000:00/0000:00:1e.0
SysFS BusID: 0000:00:1e.0
Hardware Class: bridge
Model: "Intel 82801 Mobile PCI Bridge"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2448 "82801 Mobile PCI Bridge"
Revision: 0x93
Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04 i01"
Config Status: cfg=new, avail=yes, need=no, active=unknown

30: PCI 1f.0: 0601 ISA bridge
[Created at pci.318]
Unique ID: BUZT.ZFRlJ_MU9u1
SysFS ID: /devices/pci0000:00/0000:00:1f.0
SysFS BusID: 0000:00:1f.0
Hardware Class: bridge
Model: "Intel ICH9M LPC Interface Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2919 "ICH9M LPC Interface Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Module Alias: "pci:v00008086d00002919sv0000103Csd000030E9bc06sc01 i00"
Driver Info #0:
Driver Status: iTCO_wdt is not active
Driver Activation Cmd: "modprobe iTCO_wdt"
Config Status: cfg=new, avail=yes, need=no, active=unknown

31: PCI 1f.2: 0101 IDE interface
[Created at pci.318]
Unique ID: w7Y8.Nyppg9lrOB5
SysFS ID: /devices/pci0000:00/0000:00:1f.2
SysFS BusID: 0000:00:1f.2
Hardware Class: storage
Model: "Intel ICH9M/M-E 2 port SATA IDE Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2928 "ICH9M/M-E 2 port SATA IDE Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "ata_piix"
Driver Modules: "ata_piix"
I/O Ports: 0x1f0-0x1f7 (rw)
I/O Port: 0x3f6 (rw)
I/O Ports: 0x170-0x177 (rw)
I/O Port: 0x376 (rw)
I/O Ports: 0x80f0-0x80ff (rw)
I/O Ports: 0x80e0-0x80ef (rw)
IRQ: 21 (no events)
Module Alias: "pci:v00008086d00002928sv0000103Csd000030E9bc01sc01 i8a"
Config Status: cfg=new, avail=yes, need=no, active=unknown

32: PCI 1f.5: 0101 IDE interface
[Created at pci.318]
Unique ID: W60f.t4kjneGNJW3
SysFS ID: /devices/pci0000:00/0000:00:1f.5
SysFS BusID: 0000:00:1f.5
Hardware Class: storage
Model: "Intel ICH9M/M-E 2 port SATA IDE Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x292d "ICH9M/M-E 2 port SATA IDE Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Revision: 0x03
Driver: "ata_piix"
Driver Modules: "ata_piix"
I/O Ports: 0x8108-0x810f (rw)
I/O Ports: 0x8124-0x8127 (rw)
I/O Ports: 0x8100-0x8107 (rw)
I/O Ports: 0x8120-0x8123 (rw)
I/O Ports: 0x80d0-0x80df (rw)
I/O Ports: 0x80c0-0x80cf (rw)
IRQ: 18 (51969 events)
Module Alias: "pci:v00008086d0000292Dsv0000103Csd000030E9bc01sc01 i85"
Config Status: cfg=new, avail=yes, need=no, active=unknown

33: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
Unique ID: VCu0.zd38egnLD6B
Parent ID: vSkL.R7YROTkYTtB
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ATI VGA compatible controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x95c2
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Driver: "radeon"
Driver Modules: "drm"
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
I/O Ports: 0x7000-0x7fff (rw)
Memory Range: 0xd8400000-0xd840ffff (rw,non-prefetchable)
Memory Range: 0xd8420000-0xd843ffff (ro,non-prefetchable,disabled)
IRQ: 48 (177093 events)
Module Alias: "pci:v00001002d000095C2sv0000103Csd000030E9bc03sc00 i00"
Driver Info #0:
Driver Status: radeon is active
Driver Activation Cmd: "modprobe radeon"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)

34: PCI 300.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.GbTjk0YbA70
Parent ID: qTvu.8Makl3iDVc3
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Intel PRO/Wireless 5100 AGN [Shiloh] Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x4237 "PRO/Wireless 5100 AGN [Shiloh] Network Connection"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x1211
Driver: "iwlagn"
Driver Modules: "iwlagn"
Device File: wlan0
Features: WLAN
Memory Range: 0xd8200000-0xd8201fff (rw,non-prefetchable)
IRQ: 47 (341872 events)
HW Address: 00:22:fa:41:86:64
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v00008086d00004237sv00008086sd00001211bc02sc80 i00"
Driver Info #0:
Driver Status: iwlagn is active
Driver Activation Cmd: "modprobe iwlagn"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #21 (PCI bridge)

35: PCI 8600.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.sA9iTwyxNq9
Parent ID: HnsE.Gg7kbdesig6
SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:86:00.0
SysFS BusID: 0000:86:00.0
Hardware Class: network
Model: "Marvell Ethernet controller"
Vendor: pci 0x11ab "Marvell Technology Group Ltd."
Device: pci 0x436c
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30e9
Driver: "sky2"
Driver Modules: "sky2"
Device File: eth0
Memory Range: 0xd0100000-0xd0103fff (rw,non-prefetchable)
I/O Ports: 0x2000-0x2fff (rw)
Memory Range: 0xd8600000-0xd861ffff (ro,non-prefetchable,disabled)
IRQ: 46 (1 event)
HW Address: 00:24:81:54:1a:9f
Link detected: no
Module Alias: "pci:v000011ABd0000436Csv0000103Csd000030E9bc02sc00 i00"
Driver Info #0:
Driver Status: sky2 is active
Driver Activation Cmd: "modprobe sky2"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (PCI bridge)

36: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: z9pp.+GmdJItMGB9
SysFS ID: /devices/pnp0/00:00
SysFS BusID: 00:00
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0a08
Config Status: cfg=new, avail=yes, need=no, active=unknown

37: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: QL3u.B+yZ9Ve8gC1
SysFS ID: /devices/pnp0/00:01
SysFS BusID: 00:01
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c02
Config Status: cfg=new, avail=yes, need=no, active=unknown

38: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: tWJy.ld94kxNGZf5
SysFS ID: /devices/pnp0/00:02
SysFS BusID: 00:02
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0200
Config Status: cfg=new, avail=yes, need=no, active=unknown

39: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: KiZ0.jDhFyyFrbg5
SysFS ID: /devices/pnp0/00:03
SysFS BusID: 00:03
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: INT
SubDevice: eisa 0x0800
Config Status: cfg=new, avail=yes, need=no, active=unknown

40: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: ntp4.B+yZ9Ve8gC1
SysFS ID: /devices/pnp0/00:04
SysFS BusID: 00:04
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c02
Config Status: cfg=new, avail=yes, need=no, active=unknown

41: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: E349.fG36JLVNse9
SysFS ID: /devices/pnp0/00:05
SysFS BusID: 00:05
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0103
Config Status: cfg=new, avail=yes, need=no, active=unknown

42: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: hEKD.DE8RM9cWQQ8
SysFS ID: /devices/pnp0/00:06
SysFS BusID: 00:06
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c04
Config Status: cfg=new, avail=yes, need=no, active=unknown

43: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: NhVi.B+yZ9Ve8gC1
SysFS ID: /devices/pnp0/00:07
SysFS BusID: 00:07
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c02
Config Status: cfg=new, avail=yes, need=no, active=unknown

44: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: qslm.WYwRElrJa93
SysFS ID: /devices/pnp0/00:08
SysFS BusID: 00:08
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0b00
Config Status: cfg=new, avail=yes, need=no, active=unknown

45: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: H20r.xhndlW9HXJ7
SysFS ID: /devices/pnp0/00:09
SysFS BusID: 00:09
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0303
Config Status: cfg=new, avail=yes, need=no, active=unknown

46: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: iT2w.DXDbhsRcPO7
SysFS ID: /devices/pnp0/00:0a
SysFS BusID: 00:0a
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: SYN
SubDevice: eisa 0x014b
Config Status: cfg=new, avail=yes, need=no, active=unknown

47: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
Unique ID: 9fI_.B95vU_X3dpD
SysFS ID: /devices/pnp0/00:0b
SysFS BusID: 00:0b
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: HPQ
SubDevice: eisa 0x0004
Config Status: cfg=new, avail=yes, need=no, active=unknown

48: IDE 00.0: 10600 Disk
[Created at block.243]
Unique ID: 3OOL.XhsCrWLP9j2
Parent ID: w7Y8.Nyppg9lrOB5
SysFS ID: /class/block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: "Hitachi HTS54322"
Vendor: "Hitachi"
Device: "HTS54322"
Revision: "FBEO"
Serial ID: "090314FBCE00LKE3ADBB"
Driver: "ata_piix", "sd"
Driver Modules: "ata_piix"
Device File: /dev/sda
Device Files: /dev/sda, /dev/disk/by-id/ata-Hitachi_HTS543225L9A300_090314FBCE00LKE3ADBB, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5432090314FBCE00LKE3ADBB, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0, /dev/disk/by-id/wwn-0x5000cca566ddb328
Device Number: block 8:0-8:15
BIOS id: 0x80
Geometry (Logical): CHS 30401/255/63
Size: 488397168 sectors a 512 bytes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #31 (IDE interface)

49: None 00.0: 11300 Partition
[Created at block.412]
Unique ID: bdUI.SE1wIdpsiiC
Parent ID: 3OOL.XhsCrWLP9j2
SysFS ID: /class/block/sda/sda1
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda1
Device Files: /dev/sda1, /dev/disk/by-id/ata-Hitachi_HTS543225L9A300_090314FBCE00LKE3ADBB-part1, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5432090314FBCE00LKE3ADBB-part1, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1, /dev/disk/by-uuid/8E9039AE90399DA1, /dev/disk/by-id/wwn-0x5000cca566ddb328-part1
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #48 (Disk)

50: None 00.0: 11300 Partition
[Created at block.412]
Unique ID: 2pkM.SE1wIdpsiiC
Parent ID: 3OOL.XhsCrWLP9j2
SysFS ID: /class/block/sda/sda2
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda2
Device Files: /dev/sda2, /dev/disk/by-id/ata-Hitachi_HTS543225L9A300_090314FBCE00LKE3ADBB-part2, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5432090314FBCE00LKE3ADBB-part2, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part2, /dev/disk/by-uuid/FC70-0B33, /dev/disk/by-id/wwn-0x5000cca566ddb328-part2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #48 (Disk)

51: None 00.0: 11300 Partition
[Created at block.412]
Unique ID: W__Q.SE1wIdpsiiC
Parent ID: 3OOL.XhsCrWLP9j2
SysFS ID: /class/block/sda/sda3
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda3
Device Files: /dev/sda3, /dev/disk/by-id/ata-Hitachi_HTS543225L9A300_090314FBCE00LKE3ADBB-part3, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5432090314FBCE00LKE3ADBB-part3, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part3, /dev/disk/by-id/wwn-0x5000cca566ddb328-part3
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #48 (Disk)

52: None 00.0: 11300 Partition
[Created at block.412]
Unique ID: QLVZ.SE1wIdpsiiC
Parent ID: 3OOL.XhsCrWLP9j2
SysFS ID: /class/block/sda/sda5
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda5
Device Files: /dev/sda5, /dev/disk/by-id/ata-Hitachi_HTS543225L9A300_090314FBCE00LKE3ADBB-part5, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5432090314FBCE00LKE3ADBB-part5, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part5, /dev/disk/by-uuid/efd22f22-834c-46be-a378-985e0d94c726, /dev/disk/by-id/wwn-0x5000cca566ddb328-part5
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #48 (Disk)

53: None 00.0: 11300 Partition
[Created at block.412]
Unique ID: tWld.SE1wIdpsiiC
Parent ID: 3OOL.XhsCrWLP9j2
SysFS ID: /class/block/sda/sda6
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda6
Device Files: /dev/sda6, /dev/disk/by-id/ata-Hitachi_HTS543225L9A300_090314FBCE00LKE3ADBB-part6, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5432090314FBCE00LKE3ADBB-part6, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part6, /dev/disk/by-uuid/31672adb-1c33-4d3b-b340-0732a0655e99, /dev/disk/by-id/wwn-0x5000cca566ddb328-part6, /dev/root
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #48 (Disk)

54: None 00.0: 11300 Partition
[Created at block.412]
Unique ID: Zzw6.SE1wIdpsiiC
Parent ID: 3OOL.XhsCrWLP9j2
SysFS ID: /class/block/sda/sda7
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda7
Device Files: /dev/sda7, /dev/disk/by-id/ata-Hitachi_HTS543225L9A300_090314FBCE00LKE3ADBB-part7, /dev/disk/by-id/scsi-SATA_Hitachi_HTS5432090314FBCE00LKE3ADBB-part7, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part7, /dev/disk/by-uuid/6f101a7e-6458-4b23-a94e-723adfa6d42e, /dev/disk/by-id/wwn-0x5000cca566ddb328-part7
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #48 (Disk)

55: SCSI 100.0: 10602 CD-ROM (DVD)
[Created at block.247]
Unique ID: KD9E.YcyXXvOrs5E
Parent ID: w7Y8.Nyppg9lrOB5
SysFS ID: /class/block/sr0
SysFS BusID: 1:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
Hardware Class: cdrom
Model: "Optiarc DVD RW AD-7561S"
Vendor: "Optiarc"
Device: "DVD RW AD-7561S"
Revision: "AH03"
Driver: "ata_piix", "sr"
Driver Modules: "ata_piix"
Device File: /dev/sr0 (/dev/sg1)
Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-Optiarc_DVD_RW_AD-7561S_30651450_4049159Q111, /dev/disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw
Device Number: block 11:0 (char 21:1)
Features: DVD
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #31 (IDE interface)
Drive Speed: 24

56: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.cO89g+iefn1
Parent ID: sClz.E5H318jkA7A
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: option is not active
Driver Activation Cmd: "modprobe option"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (USB Controller)

57: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.9T1GDCLyFd9
Parent ID: 5YuN.CGOZ3+TK7M9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: option is not active
Driver Activation Cmd: "modprobe option"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #28 (USB Controller)

58: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: uIhY.MxUuepIFPaE
Parent ID: pwJ7.90z7LDeS0N3
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (USB Controller)

59: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: zPk0.7gZT0a5zLs5
Parent ID: gFpy.gQvtpnl9Yl3
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (USB Controller)

60: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 2XnU.uOe2OKugI8D
Parent ID: XaIo.BrrdIMts384
SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (USB Controller)

61: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 7eqy.v+N+B0xY+P6
Parent ID: 1GTX.cm7uuZx6Re3
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (USB Controller)

62: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: BSFT.gkSaZmjGyhD
Parent ID: vayM.7B4eN83qy04
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0
SysFS BusID: 7-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (USB Controller)

63: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: FZIx.RTX9xWW_uz4
Parent ID: mvRC.eb0OsiAXUP4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0
SysFS BusID: 8-0:1.0
Hardware Class: hub
Model: "Linux 2.6.39-0-generic uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.39-0-generic uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #27 (USB Controller)

64: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: wkjR.nabxKFUyBl4
Parent ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0
SysFS BusID: 1-5:1.0
Hardware Class: unknown
Model: "Chicony Electronics CKF7063"
Hotplug: USB
Vendor: usb 0x04f2 "Chicony Electronics Co., Ltd"
Device: usb 0xb083 "CKF7063"
Revision: "33.19"
Serial ID: "SN0001"
Driver: "uvcvideo"
Driver Modules: "uvcvideo"
Device File: /dev/input/event6
Device Files: /dev/input/event6, /dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._CKF7063_SN0001-event-if00, /dev/input/by-path/pci-0000:00:1a.7-usb-0:5:1.0-event
Device Number: char 13:70
Speed: 480 Mbps
Module Alias: "usb:v04F2pB083d3319dcEFdsc02dp01ic0Eisc01ip00"
Driver Info #0:
Driver Status: uvcvideo is active
Driver Activation Cmd: "modprobe uvcvideo"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #56 (Hub)

66: USB 00.0: 11500 Bluetooth Device
[Created at usb.122]
Unique ID: KRJj.Rx769wQkUX9
Parent ID: uIhY.MxUuepIFPaE
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0
SysFS BusID: 3-1:1.0
Hardware Class: bluetooth
Model: "HP Integrated Module"
Hotplug: USB
Vendor: usb 0x03f0 "HP"
Device: usb 0x171d "HP Integrated Module"
Revision: "1.00"
Driver: "btusb"
Driver Modules: "btusb"
Speed: 12 Mbps
Module Alias: "usb:v03F0p171Dd0100dcE0dsc01dp01icE0isc01ip01"
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #58 (Hub)

70: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: hhw5.m7C82g3gZbB
Parent ID: FZIx.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0
SysFS BusID: 8-1:1.0
Hardware Class: mouse
Model: "USB OPTICAL MOUSE"
Hotplug: USB
Vendor: usb 0x15d9
Device: usb 0x0a4c "USB OPTICAL MOUSE"
Revision: "1.00"
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event4, /dev/input/by-id/usb-15d9_USB_OPTICAL_MOUSE-event-mouse, /dev/input/by-path/pci-0000:00:1d.2-usb-0:1:1.0-event-mouse, /dev/input/by-id/usb-15d9_USB_OPTICAL_MOUSE-mouse, /dev/input/by-path/pci-0000:00:1d.2-usb-0:1:1.0-mouse
Device Number: char 13:63 (char 13:32)
Speed: 1.5 Mbps
Module Alias: "usb:v15D9p0A4Cd0100dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #63 (Hub)

71: PS/2 00.0: 10800 Keyboard
[Created at input.161]
Unique ID: 9ui9.+49ps10DtUF
Hardware Class: keyboard
Model: "AT Translated Set 2 keyboard"
Vendor: 0x0001
Device: 0x0001 "AT Translated Set 2 keyboard"
Compatible to: int 0x0211 0x0001
Device File: /dev/input/event3
Device Files: /dev/input/event3, /dev/input/by-path/platform-i8042-serio-0-event-kbd
Device Number: char 13:67
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown

72: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
Unique ID: AH6Q.ZHI3OT7LsxA
Hardware Class: mouse
Model: "SynPS/2 Synaptics TouchPad"
Vendor: 0x0002
Device: 0x0007 "SynPS/2 Synaptics TouchPad"
Compatible to: int 0x0210 0x0002
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event9, /dev/input/by-path/platform-i8042-serio-4-event-mouse, /dev/input/by-path/platform-i8042-serio-4-mouse
Device Number: char 13:63 (char 13:33)
Driver Info #0:
Buttons: 2
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown

73: None 00.0: 10103 CPU
[Created at cpu.304]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: "GenuineIntel"
Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,m ca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,ss e2,ss,ht,tm,pbe,nx,lm,constant_tsc,arch_perfmon,pe bs,bts,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,es t,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,xsave,lahf_lm,id a,dts
Clock: 1200 MHz
BogoMips: 4189.21
Cache: 2048 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown

74: None 01.0: 10103 CPU
[Created at cpu.304]
Unique ID: wkFv.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: "GenuineIntel"
Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,m ca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,ss e2,ss,ht,tm,pbe,nx,lm,constant_tsc,arch_perfmon,pe bs,bts,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,es t,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,xsave,lahf_lm,id a,dts
Clock: 1200 MHz
BogoMips: 4189.45
Cache: 2048 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown

75: None 00.0: 10700 Loopback
[Created at net.124]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown

76: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.sA9iTwyxNq9
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:1c.5/0000:86:00.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "sky2"
Driver Modules: "sky2"
Device File: eth0
HW Address: 00:24:81:54:1a:9f
Link detected: no
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #35 (Ethernet controller)

77: None 00.0: 1070a WLAN
[Created at net.124]
Unique ID: AYEt.QXn1l67RSa1
Parent ID: y9sn.GbTjk0YbA70
SysFS ID: /class/net/wlan0
SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
Hardware Class: network interface
Model: "WLAN network interface"
Driver: "iwlagn"
Driver Modules: "iwlagn"
Device File: wlan0
HW Address: 00:22:fa:41:86:64
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #34 (WLAN controller)

jtarin
June 18th, 2011, 03:13 AM
He,he....it's a ATI Mobility RadeonTM HD 3430 (http://www.hp.com/hpinfo/newsroom/press_kits/2008/connecting/ds_bn_6530s.pdf)......but I find no update for the proprietary. Maybe someone else knows.

mellouli
June 18th, 2011, 03:25 AM
He,he....it's a ATI Mobility RadeonTM HD 3430 (http://www.hp.com/hpinfo/newsroom/press_kits/2008/connecting/ds_bn_6530s.pdf)......but I find no update for the proprietary. Maybe someone else knows.
yeah i know that .I hope to find someone who knows how to solve this problem

Quackers
June 18th, 2011, 03:32 AM
The fan that you hear running may be your graphics card fan, not the cpu fan.
I have no experience with the ATI drivers, but I would look into removing all ATI/fglrx drivers and see if the fan speed reduces. I appreciate that there will be a loss in video performance, but it may give you an answer.

jtarin
June 18th, 2011, 03:36 AM
The fan that you hear running may be your graphics card fan, not the cpu fan.
I have no experience with the ATI drivers, but I would look into removing all ATI/fglrx drivers and see if the fan speed reduces. I appreciate that there will be a loss in video performance, but it may give you an answer.That was the direction I was headed...graphics fan/overheating due to faulty driver.;)

Quackers
June 18th, 2011, 03:38 AM
That sounds reasonable to me :-)
I'm just not sure about what needs to be done other than removing the driver. Maybe remove xorg.conf too? - not sure with fglrx

jtarin
June 18th, 2011, 03:44 AM
That sounds reasonable to me :-)
I'm just not sure about what needs to be done other than removing the driver. Maybe remove xorg.conf too? - not sure with fglrx
Possibly, but as he is running 11.04 I would hazard a guess... older box and newest distro:(
As the "Magic 8 ball (http://8ball.ofb.net/)" says, "Outlook not so good".

mellouli
June 18th, 2011, 12:06 PM
That sounds reasonable to me :-)
I'm just not sure about what needs to be done other than removing the driver. Maybe remove xorg.conf too? - not sure with fglrx
so can someone who knows help me?

jtarin
June 18th, 2011, 01:09 PM
so can someone who knows help me?
You have installed 11.04.....this not a LTS release, in fact it is a great departure from the Ubuntu we have grown accustomed too. Not much is known about the difficulties of running it, compared to the previous versions. I would advise you to install something like 10.04 and as you learn, upgrade a step at a time or do your homework or this one.

mellouli
June 18th, 2011, 01:20 PM
You have installed 11.04.....this not a LTS release, in fact it is a great departure from the Ubuntu we have grown accustomed too. Not much is known about the difficulties of running it, compared to the previous versions. I would advise you to install something like 10.04 and as you learn, upgrade a step at a time or do your homework or this one.
I also had the same problem with ubuntu 10.4 lts
so what's the difference

jtarin
June 18th, 2011, 01:37 PM
I also had the same problem with ubuntu 10.4 lts
so what's the difference
You say you had the same experience with 10.04.....will I guess in your case there is no difference.

mellouli
June 18th, 2011, 02:20 PM
You say you had the same experience with 10.04.....will I guess in your case there is no difference.
yeah i hope with every new version off ubuntu to fix that problem but nothing happened
i tried to install opensuse but there is kworkers problem and the cpu is overload
with fedora the samz thing and when i installed the ati driver it became very slow and the cpu overload
However, Ihave a hp 4510s probook and everything worked fine with it but hp compact 6830s nothing worked only windows when I installed the proper driver of ati not from the instruction from official site but from the officiel site of hp everything worked fine since then
but hp doesn't provide ati drivers for linux this sucks
and ubuntu doesn't fix this bug

Quackers
June 18th, 2011, 04:12 PM
How did you install the video driver in the pc with the fan running all the time?
Via additional Drivers? If so run Additional drivers again and de-activate the driver.
Or go through synaptic package manager and remove everything regarding fglrx.

On a different point, how can Ubuntu "fix this bug" if it's a fglrx driver problem? They don't write the graphics driver.

mellouli
June 18th, 2011, 05:40 PM
How did you install the video driver in the pc with the fan running all the time?
Via additional Drivers? If so run Additional drivers again and de-activate the driver.
Or go through synaptic package manager and remove everything regarding fglrx.

On a different point, how can Ubuntu "fix this bug" if it's a fglrx driver problem? They don't write the graphics driver.
I installed both of


"Ubuntu-X" : This PPA offers the latest stable releases of video driver-related components. Follow the instructions at: https://launchpad.net/~ubuntu-x-swat/+archive/x-updates (https://launchpad.net/%7Eubuntu-x-swat/+archive/x-updates)
Xorg-edgers: This bleeding-edge PPA offers video driver-related components straight from their code (git) repositories. Follow the instructions at: https://launchpad.net/~xorg-edgers/+archive/ppa (https://launchpad.net/%7Exorg-edgers/+archive/ppa)

the ubuntu-x is faster with compiz effects but has the kworker problem only if i suspend the computer and run it again

Xorg-edgers is slow with compiz effects but doesn't show the kworker overload cpu

mellouli
June 18th, 2011, 08:55 PM
How did you install the video driver in the pc with the fan running all the time?
Via additional Drivers? If so run Additional drivers again and de-activate the driver.
Or go through synaptic package manager and remove everything regarding fglrx.

On a different point, how can Ubuntu "fix this bug" if it's a fglrx driver problem? They don't write the graphics driver.
i installed fglrx like you said and the same ptoblem

mellouli
June 19th, 2011, 12:08 AM
bump

jtarin
June 19th, 2011, 12:51 AM
Your not the only one with FGLRX and kworker problems. (http://www.google.com/search?client=ubuntu&channel=fs&q=kworker&ie=utf-8&oe=utf-8)

mellouli
June 19th, 2011, 01:41 AM
Your not the only one with FGLRX and kworker problems. (http://www.google.com/search?client=ubuntu&channel=fs&q=kworker&ie=utf-8&oe=utf-8)
i know that and that's the reason of writing this thread
and i searched the whole web and every bug but never found what i'm looking for:(:(:(:(:(

jtarin
June 19th, 2011, 01:49 AM
When I started with Linux/Unix over 13 years ago there was only one video card at the time that would work 100% of the time .....the S3. Every computer I had for about 2-3 years I had to swap out the video card. The Linux Hardware Compatibility List is the first place I go when contemplating buying new hardware or computer. I don't like surprises in my OS either if I can avoid them. Things just need to fit sometime.

mellouli
June 19th, 2011, 02:05 AM
When I started with Linux/Unix over 13 years ago there was only one video card at the time that would work 100% of the time .....the S3. Every computer I had for about 2-3 years I had to swap out the video card. The Linux Hardware Compatibility List is the first place I go when contemplating buying new hardware or computer. I don't like surprises in my OS either if I can avoid them. Things just need to fit sometime.
so you're saying ati is not compatible with linux
I'll say no because i have an other laptop with ati card too but the problem was the battery in lasts only 2 hours but 6 hours in windows:(:(:(
but windows isn't a solution because it's the problem of every single thing in any laptop

mellouli
June 19th, 2011, 07:21 PM
I did that
downgraded to lucid 10.4.2
found that that the fan stopped running when i left the laptop for 15 mins
i created a script to stop the fan and it's like that

while true
do
value=`cat $cat /sys/class/thermal/thermal_zone0/temp`
if [ $value -le "50000" ]
then
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:00/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:0a/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:01/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:02/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:03/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:04/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:05/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:06/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:07/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:08/thermal_cooling/cur_state
echo 0 >/sys/bus/acpi/drivers/fan/PNP0C0B:09/thermal_cooling/cur_state
echo "$value It's cool man!"
else
echo "$value Not cool at all"
echo 1 >/sys/bus/acpi/drivers/fan/PNP0C0B:00/thermal_cooling/cur_state
sleep 30s
fi
sleep 10s
done

and sensors show


ubuntu@lucid:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +47.0C (crit = +110.0C)
temp2: +43.0C (crit = +256.0C)
temp3: +49.0C (crit = +112.0C)
temp4: +51.0C (crit = +105.0C)
temp5: +31.9C (crit = +112.0C)
temp6: +20.0C (crit = +110.0C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +45.0C (high = +105.0C, crit = +105.0C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +44.0C (high = +105.0C, crit = +105.0C)
an I not cookin my laptop,

mellouli
June 19th, 2011, 09:55 PM
At least tell me what i did is right or wrong

jtarin
June 19th, 2011, 11:10 PM
If it works....it's looks good. Good work.

mellouli
June 19th, 2011, 11:20 PM
If it works....it's looks good. Good work.
yeah it worked good with lucid and the fan is more quieter and it runs at maximum for 1 min in full speed like I wrote in the script
what i'm now is the temperature good or not
and i set the fan alway on from the bios and it's a quest mode without that option it's always 55
but now most of the time is like that


ubuntu@lucid:~/compiz$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +49.0C (crit = +110.0C)
temp2: +52.0C (crit = +256.0C)
temp3: +52.0C (crit = +112.0C)
temp4: +51.0C (crit = +105.0C)
temp5: +30.3C (crit = +112.0C)
temp6: +20.0C (crit = +110.0C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +48.0C (high = +105.0C, crit = +105.0C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +47.0C (high = +105.0C, crit = +105.0C)

sammiev
June 19th, 2011, 11:45 PM
My i5 runs at about 46c while running win7 before fan turns on and seems to stay under 56c at all times. ( fan may run at about 25% at upper temps. )
With linux the fan turns on between 49 and 52c and seems to stay under 60c under heavy loads and again likely running at about 25% to 50% fan speed. GL :)

mellouli
June 19th, 2011, 11:57 PM
My i5 runs at about 46c while running win7 before fan turns on and seems to stay under 56c at all times. ( fan may run at about 25% at upper temps. )
With linux the fan turns on between 49 and 52c and seems to stay under 60c under heavy loads and again likely running at about 25% to 50% fan speed. GL :)
that's more reasonable for my case it tuned on fo 45 and off on 38 with was not acceptable and made it run all the time with the script iwrote it turn on in full speed on 50 and stops after 30 sec and stops when the temperature is less than 50
thank u the information

jtarin
June 20th, 2011, 12:12 AM
I did that
downgraded to lucid 10.4.2
found that that the fan stopped running when i left the laptop for 15 mins
i created a script to stop the fan and it's like that
an I not cookin my laptop,
Isn't it great to have control like that over your system? Not like other OS's where you have no idea what they are controlling.:P
Mark this thread as solved. It will help someone else. You might think about writing a tutorial on this procedure of writing the script and entering it.......Here. (http://ubuntuforums.org/forumdisplay.php?f=100)

mellouli
June 20th, 2011, 12:29 AM
Isn't it great to have control like that over your system? Not like other OS's where you have no idea what they are controlling.:P
yeah that what I love the most about linux

jtarin
June 20th, 2011, 12:37 AM
yeah that what I love the most about linuxI edited my last post...take a look.:p

mellouli
June 20th, 2011, 01:16 AM
thanks a lot

mellouli
June 20th, 2011, 02:35 AM
Heyyyyyyyyyy I found a solution even better
runnig the ubuntu notebook edition in lucid is the best and my laptop is quiet without any script even better than lxde
I shared to let u all know
I love working in Open source
Look at the temperature now never reached before in linux on my laptop

root@lucid:/home/ubuntu# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0C (crit = +110.0C)
temp2: +44.0C (crit = +256.0C)
temp3: +41.0C (crit = +112.0C)
temp4: +43.0C (crit = +105.0C)
temp5: +30.2C (crit = +112.0C)
temp6: +20.0C (crit = +110.0C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +38.0C (high = +105.0C, crit = +105.0C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +37.0C (high = +105.0C, crit = +105.0C)

root@lucid:/home/ubuntu#

Quackers
June 20th, 2011, 03:24 AM
That's good news :-)
Well done :-)

pqwoerituytrueiwoq
June 20th, 2011, 03:55 AM
my guess is it is cooler cause it uses metacity and not compiz and all its prettiness

mellouli
June 20th, 2011, 09:34 AM
my guess is it is cooler cause it uses metacity and not compiz and all its prettiness
look today it's even cooler than windows I'm excited
:P:P:P:P:P:P

root@lucid:/home/ubuntu# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +34.0C (crit = +110.0C)
temp2: +30.0C (crit = +256.0C)
temp3: +36.0C (crit = +112.0C)
temp4: +36.0C (crit = +105.0C)
temp5: +26.8C (crit = +112.0C)
temp6: +20.0C (crit = +110.0C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +32.0C (high = +105.0C, crit = +105.0C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +32.0C (high = +105.0C, crit = +105.0C)

I heard that ubuntu in the next versions will use metacity instead of compiz

is there any other interfaces with metacity?