sidaphextwin
May 1st, 2011, 08:11 PM
Hello,
I have a headset jack that I can not run on ubuntu. The point is that yes I have sound but always through the speakers on my laptop.
I edited the file /etc/modprobe.d/alsa-base.conf adding the following lines:
options snd-hda-intel model = acer position_fix = 1 index = 0 enable = 1 enable_msi = 1
does not work, then ...
options snd-hda-intel model = auto position_fix = 1 index = 0 enable = 1 enable_msi = 1
did not work, then ...
options snd-hda-intel model = laptop position_fix = 1 index = 0 enable = 1 enable_msi = 1
but neither.
Following the instructions I have to launch this command, see codec used and the list of models displayed in the address below to configure /etc/modprobe.d/alsa-base.conf getting the model as above.
Launching this cat /proc/asound/card0/codec # * | grep Codec I get:
Codec: ATI HDMI R6xx
http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt
The fact is that the list of models no R6xx ati hdmi or hdmi or ati, nothing ... And I can not solve the issue that the headphones.
Running alsamixer for R6xx ATI HDMI codecs I have only one S / PDIF to 00. If you press F6, I get a second card HDA ATI SB with Conexant CX20584 codec and I get this only controls MASTER, PCM and BEEP.
Anybody can help me?
I have a headset jack that I can not run on ubuntu. The point is that yes I have sound but always through the speakers on my laptop.
I edited the file /etc/modprobe.d/alsa-base.conf adding the following lines:
options snd-hda-intel model = acer position_fix = 1 index = 0 enable = 1 enable_msi = 1
does not work, then ...
options snd-hda-intel model = auto position_fix = 1 index = 0 enable = 1 enable_msi = 1
did not work, then ...
options snd-hda-intel model = laptop position_fix = 1 index = 0 enable = 1 enable_msi = 1
but neither.
Following the instructions I have to launch this command, see codec used and the list of models displayed in the address below to configure /etc/modprobe.d/alsa-base.conf getting the model as above.
Launching this cat /proc/asound/card0/codec # * | grep Codec I get:
Codec: ATI HDMI R6xx
http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt
The fact is that the list of models no R6xx ati hdmi or hdmi or ati, nothing ... And I can not solve the issue that the headphones.
Running alsamixer for R6xx ATI HDMI codecs I have only one S / PDIF to 00. If you press F6, I get a second card HDA ATI SB with Conexant CX20584 codec and I get this only controls MASTER, PCM and BEEP.
Anybody can help me?