PDA

View Full Version : [ubuntu] AMD ATI Mobility HD Card on ubuntu 10.10 please help



adel.sartawi
April 13th, 2011, 05:49 PM
using lspci


00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)


using glxgears


Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.356 FPS
301 frames in 5.0 seconds = 60.107 FPS
301 frames in 5.0 seconds = 60.107 FPS
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 2302 requests (2301 known processed) with 0 events remaining.

and using glxinfo | grep direct

direct rendering: Yes


low frame rate why ?](*,)

Temüjin
April 13th, 2011, 05:53 PM
because your refresh rate is 60Hz...

Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
... hence the 60fps.

glxgears is not a benchmark!](*,)

adel.sartawi
April 13th, 2011, 05:53 PM
upppppppppppppppppppppppppppppppp

Temüjin
April 13th, 2011, 05:54 PM
upppppppppppppppppppppppppppppppp
You bumped in 3 minutes? Don't do that.

adel.sartawi
April 13th, 2011, 05:54 PM
because your refresh rate is 60Hz...

... hence the 60fps.

glxgears is not a benchmark!](*,)

so is that ok ?

adel.sartawi
April 13th, 2011, 06:00 PM
can't enable the desktop effects and customisation please help !

Temüjin
April 13th, 2011, 06:00 PM
so is that ok ?
Yes.

adel.sartawi
April 13th, 2011, 06:04 PM
$lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]

$ compiz
compiz (core) - Error: Couldn't load plugin 'ccp'
Couldn't find a perfect decorator match; trying all decorators
Found no decorator to start
compiz (core) - Error: Couldn't load plugin 'ccp'
Couldn't find a perfect decorator match; trying all decorators

adel.sartawi
April 13th, 2011, 06:49 PM
$lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]

$ compiz
compiz (core) - Error: Couldn't load plugin 'ccp'
Couldn't find a perfect decorator match; trying all decorators
Found no decorator to start
compiz (core) - Error: Couldn't load plugin 'ccp'
Couldn't find a perfect decorator match; trying all decorators

help please enable the desktop effects Just for learning

howefield
April 13th, 2011, 09:30 PM
Threads merged.

Please have some patience. Bump once after 24(ish) hours have passed with no reply.