PDA

View Full Version : [ubuntu] Get error : hd0,msdos 1 out of disk after a fresh install



EricRas
April 4th, 2011, 09:48 PM
Hi All,

I get error :hd0, msdos1 out of disk after a fresh install of Ubuntu 10.10 .

You'll find attached the output of boot info script.
Many thanks for your support

Eric

Hedgehog1
April 4th, 2011, 10:29 PM
Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.

sda1: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda2: __________________________________________________ _______________________

File system: Extended Partition
Boot sector type: Unknown
Boot sector info:

sda5: __________________________________________________ _______________________

File system: swap
Boot sector type: -
Boot sector info:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 82.0 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 153,477,119 153,475,072 83 Linux
/dev/sda2 153,479,166 160,086,015 6,606,850 5 Extended
/dev/sda5 153,479,168 160,086,015 6,606,848 82 Linux swap / Solaris


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/sda1 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 4939145c-429c-4926-b91e-d3c89e810904 swap
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sr1 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)


=========================== sda1/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=4824bfa1-b0db-45c4-9ebd-8e8afa67c77a ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=4824bfa1-b0db-45c4-9ebd-8e8afa67c77a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=4939145c-429c-4926-b91e-d3c89e810904 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0

=================== sda1: Location of files loaded by Grub: ===================


21.6GB: boot/grub/core.img
8.8GB: boot/grub/grub.cfg
2.8GB: boot/initrd.img-2.6.35-22-generic
21.6GB: boot/vmlinuz-2.6.35-22-generic
2.8GB: initrd.img
21.6GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================

Unknown BootLoader on sda2

00000000 00 00 00 89 d0 c1 fa 1f f7 7c 24 78 8b 94 24 9c |.........|$x..$.|
00000010 00 00 00 8b 9a f4 00 00 00 29 c3 89 9a f4 00 00 |.........)......|
00000020 00 8b 84 24 9c 00 00 00 8b 90 c0 00 00 00 89 d0 |...$............|
00000030 c1 fa 1f f7 7c 24 78 8b 94 24 9c 00 00 00 8b 8a |....|$x..$......|
00000040 08 01 00 00 29 c1 89 8a 08 01 00 00 8b 84 24 9c |....).........$.|
00000050 00 00 00 8b 90 d8 00 00 00 89 d0 c1 fa 1f f7 7c |...............||
00000060 24 78 8b 94 24 9c 00 00 00 8b aa f8 00 00 00 29 |$x..$..........)|
00000070 c5 89 aa f8 00 00 00 8b 84 24 9c 00 00 00 8b 90 |.........$......|
00000080 c4 00 00 00 89 d0 c1 fa 1f f7 7c 24 78 8b 94 24 |..........|$x..$|
00000090 9c 00 00 00 8b ba 0c 01 00 00 29 c7 89 ba 0c 01 |..........).....|
000000a0 00 00 8b 84 24 9c 00 00 00 8b 90 dc 00 00 00 89 |....$...........|
000000b0 d0 c1 fa 1f f7 7c 24 78 8b 94 24 9c 00 00 00 8b |.....|$x..$.....|
000000c0 b2 fc 00 00 00 29 c6 89 b2 fc 00 00 00 8b 84 24 |.....).........$|
000000d0 9c 00 00 00 8b 90 c8 00 00 00 89 d0 c1 fa 1f f7 |................|
000000e0 7c 24 78 8b 94 24 9c 00 00 00 8b 9a 10 01 00 00 ||$x..$..........|
000000f0 29 c3 89 9a 10 01 00 00 8b 84 24 9c 00 00 00 8b |).........$.....|
00000100 90 e0 00 00 00 89 d0 c1 fa 1f f7 7c 24 78 8b 94 |...........|$x..|
00000110 24 9c 00 00 00 8b 8a 00 01 00 00 29 c1 89 8a 00 |$..........)....|
00000120 01 00 00 8b 84 24 9c 00 00 00 8b 90 cc 00 00 00 |.....$..........|
00000130 89 d0 c1 fa 1f f7 7c 24 78 8b 94 24 9c 00 00 00 |......|$x..$....|
00000140 8b aa 14 01 00 00 29 c5 e9 1d fc ff ff 8d 76 00 |......).......v.|
00000150 8b 7c 24 78 ba 67 66 66 66 01 ff 89 f8 f7 ea c1 |.|$x.gfff.......|
00000160 ff 1f 8b 84 24 9c 00 00 00 d1 fa 29 fa 29 d5 8b |....$......).)..|
00000170 90 84 00 00 00 0f af d5 e9 76 f9 ff ff 8b 84 24 |.........v.....$|
00000180 9c 00 00 00 8b 80 bc 00 00 00 89 c2 89 44 24 50 |.............D$P|
00000190 c1 fa 1f f7 fd 8b 94 24 9c 00 00 00 89 c3 8b 92 |.......$........|
000001a0 d0 00 00 00 89 54 24 4c 89 d0 c1 fa 1f f7 7c 24 |.....T$L......|$|
000001b0 78 8b 94 24 9c 00 00 00 8d 04 18 8b ba f0 00 fe |x..$............|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 d0 64 00 00 00 |............d...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200



So we can read it easier...

Hedgehog1
April 4th, 2011, 10:32 PM
You have installed your bootloader into /dev/sda2 instead of /dev/sda (it's a common mistake).

To fix this please boot off your LiveCD/LiveUSB, select 'TRY'

In the Terminal (Menu to: Applications >> Accessories >> Terminal):


sudo mount /dev/sda1 /mnt


sudo grub-install --root-directory=/mnt /dev/sda

You can then reboot and you should come right up in Ubuntu.

The Hedge

:KS

EricRas
April 4th, 2011, 10:40 PM
Hi ,
Thanks for the prompt repply ,
I tried the code 1 , here's the result :

ubuntu@ubuntu:~/TÚlÚchargements$ sudo mount /dev/sda2 /mnt
mount: you must specify the filesystem type
ubuntu@ubuntu:~/TÚlÚchargements$

Something is missing I think , just note that I'm novice

Thanks for your support

Hedgehog1
April 4th, 2011, 10:42 PM
There is oneother thing that could cause you future problems if your don't take care of it now.

The fstab file is more reliable when you use UUIDs to identify partitions. Right now your '/' (root) partition is described as /dev/sda1:


# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=4939145c-429c-4926-b91e-d3c89e810904 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0


Ideally, the partitions UUID should be used instead.


Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/sda1 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 4939145c-429c-4926-b91e-d3c89e810904 swap
/dev/sda: PTTYPE="dos"

To update the fstab file, please do this:


gksudo gedit /etc/fstab

And change this line:


/dev/sda1 / ext4 errors=remount-ro 0 1

To this:


UUID=4824bfa1-b0db-45c4-9ebd-8e8afa67c77a / ext4 errors=remount-ro 0 1


The Hedge

:KS

Hedgehog1
April 4th, 2011, 10:46 PM
Hi ,
Thanks for the prompt repply ,
I tried the code 1 , here's the result :

ubuntu@ubuntu:~/TÚlÚchargements$ sudo mount /dev/sda2 /mnt
mount: you must specify the filesystem type
ubuntu@ubuntu:~/TÚlÚchargements$

Something is missing I think , just note that I'm novice

Thanks for your support

I had typed the wrong partition in my example, sorry.

It should be:


sudo mount /dev/sda1 /mnt


sudo grub-install --root-directory=/mnt /dev/sda

The Hedge

:KS

EricRas
April 4th, 2011, 11:04 PM
I had typed the wrong partition in my example, sorry.

It should be:


sudo mount /dev/sda1 /mnt
sudo grub-install --root-directory=/mnt /dev/sdaThe Hedge

:KS

This is the result of BIS after those 2 codes

Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.

sda1: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda2: __________________________________________________ _______________________

File system: Extended Partition
Boot sector type: Unknown
Boot sector info:

sda5: __________________________________________________ _______________________

File system: swap
Boot sector type: -
Boot sector info:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 82.0 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 153,477,119 153,475,072 83 Linux
/dev/sda2 153,479,166 160,086,015 6,606,850 5 Extended
/dev/sda5 153,479,168 160,086,015 6,606,848 82 Linux swap / Solaris


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/sda1 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 4939145c-429c-4926-b91e-d3c89e810904 swap
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sr1 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /mnt ext4 (rw)


=========================== sda1/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=4824bfa1-b0db-45c4-9ebd-8e8afa67c77a ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=4824bfa1-b0db-45c4-9ebd-8e8afa67c77a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4824bfa1-b0db-45c4-9ebd-8e8afa67c77a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=4939145c-429c-4926-b91e-d3c89e810904 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0

=================== sda1: Location of files loaded by Grub: ===================


21.6GB: boot/grub/core.img
8.8GB: boot/grub/grub.cfg
2.8GB: boot/initrd.img-2.6.35-22-generic
21.6GB: boot/vmlinuz-2.6.35-22-generic
2.8GB: initrd.img
21.6GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================

Unknown BootLoader on sda2

00000000 00 00 00 89 d0 c1 fa 1f f7 7c 24 78 8b 94 24 9c |.........|$x..$.|
00000010 00 00 00 8b 9a f4 00 00 00 29 c3 89 9a f4 00 00 |.........)......|
00000020 00 8b 84 24 9c 00 00 00 8b 90 c0 00 00 00 89 d0 |...$............|
00000030 c1 fa 1f f7 7c 24 78 8b 94 24 9c 00 00 00 8b 8a |....|$x..$......|
00000040 08 01 00 00 29 c1 89 8a 08 01 00 00 8b 84 24 9c |....).........$.|
00000050 00 00 00 8b 90 d8 00 00 00 89 d0 c1 fa 1f f7 7c |...............||
00000060 24 78 8b 94 24 9c 00 00 00 8b aa f8 00 00 00 29 |$x..$..........)|
00000070 c5 89 aa f8 00 00 00 8b 84 24 9c 00 00 00 8b 90 |.........$......|
00000080 c4 00 00 00 89 d0 c1 fa 1f f7 7c 24 78 8b 94 24 |..........|$x..$|
00000090 9c 00 00 00 8b ba 0c 01 00 00 29 c7 89 ba 0c 01 |..........).....|
000000a0 00 00 8b 84 24 9c 00 00 00 8b 90 dc 00 00 00 89 |....$...........|
000000b0 d0 c1 fa 1f f7 7c 24 78 8b 94 24 9c 00 00 00 8b |.....|$x..$.....|
000000c0 b2 fc 00 00 00 29 c6 89 b2 fc 00 00 00 8b 84 24 |.....).........$|
000000d0 9c 00 00 00 8b 90 c8 00 00 00 89 d0 c1 fa 1f f7 |................|
000000e0 7c 24 78 8b 94 24 9c 00 00 00 8b 9a 10 01 00 00 ||$x..$..........|
000000f0 29 c3 89 9a 10 01 00 00 8b 84 24 9c 00 00 00 8b |).........$.....|
00000100 90 e0 00 00 00 89 d0 c1 fa 1f f7 7c 24 78 8b 94 |...........|$x..|
00000110 24 9c 00 00 00 8b 8a 00 01 00 00 29 c1 89 8a 00 |$..........)....|
00000120 01 00 00 8b 84 24 9c 00 00 00 8b 90 cc 00 00 00 |.....$..........|
00000130 89 d0 c1 fa 1f f7 7c 24 78 8b 94 24 9c 00 00 00 |......|$x..$....|
00000140 8b aa 14 01 00 00 29 c5 e9 1d fc ff ff 8d 76 00 |......).......v.|
00000150 8b 7c 24 78 ba 67 66 66 66 01 ff 89 f8 f7 ea c1 |.|$x.gfff.......|
00000160 ff 1f 8b 84 24 9c 00 00 00 d1 fa 29 fa 29 d5 8b |....$......).)..|
00000170 90 84 00 00 00 0f af d5 e9 76 f9 ff ff 8b 84 24 |.........v.....$|
00000180 9c 00 00 00 8b 80 bc 00 00 00 89 c2 89 44 24 50 |.............D$P|
00000190 c1 fa 1f f7 fd 8b 94 24 9c 00 00 00 89 c3 8b 92 |.......$........|
000001a0 d0 00 00 00 89 54 24 4c 89 d0 c1 fa 1f f7 7c 24 |.....T$L......|$|
000001b0 78 8b 94 24 9c 00 00 00 8d 04 18 8b ba f0 00 fe |x..$............|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 d0 64 00 00 00 |............d...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200


I have not reboot yet if ever change needs to be done

Thank you

EricRas
April 4th, 2011, 11:26 PM
Hi ,

After reboot, I get the following messages :
error:couldn't read file
error:you need to load kernel first
hit any key to continue
Then
Have the multiple choice of boot, select mode recover and get the following :

Loading Linux 2.6.35-22-generic
error:couldn't read file
Loading initial ramdisk
error:you need to load kernel first

I'm kinda stuck, what next ?

Thxs

Hedgehog1
April 5th, 2011, 03:40 AM
Hi ,

After reboot, I get the following messages :
error:couldn't read file
error:you need to load kernel first
hit any key to continue
Then
Have the multiple choice of boot, select mode recover and get the following :

Loading Linux 2.6.35-22-generic
error:couldn't read file
Loading initial ramdisk
error:you need to load kernel first

I'm kinda stuck, what next ?

Thxs

Eric,

Sorry I disappeared. It is income tax time and I was with the accountant. You would be surprised at now much tax a hedgehog has to pay. Anyway...

Looking over the script output, things look like they should. Of course, that doesn't mean much since it is not booting for you.

Did I read this right that this error:


error:couldn't read file
error:you need to load kernel first
hit any key to continue
happens before the grub menu appears?

At this point I would try a reinstall or 10.10, this time selecting /dev/sda to have the boot loader installed. If you have already tried this during my absense, let me know and please do a fresh script output (please press the '#' button and put the text between the CODE and /CODE text).

The Hedge

:KS