PDA

View Full Version : [ubuntu] Monitor and log power supply



Azyx
February 17th, 2011, 10:58 AM
Is there any application that log voltage from the power supply, to check if it's broken, during a long time. I can see the voltage in BIOS.

run 10.04 LTS

/cheers

Azyx
February 17th, 2011, 11:45 AM
I think I need sensors and run
sudo sensors-detect

I detect w83697hf-isa-0290 and EDID


Next adapter: nouveau-0000:01:00.0-1 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)


but in the end there only says:


To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
w83627hf
#----cut here----

When I the run sensor I get rabbish-values like this:


$ sensors
w83697hf-isa-0290
Adapter: ISA adapter
in0: +1.65 V (min = +1.31 V, max = +1.06 V) ALARM
in2: +3.39 V (min = +2.21 V, max = +0.13 V) ALARM
in3: +3.04 V (min = +1.02 V, max = +2.90 V) ALARM
in4: +3.15 V (min = +2.67 V, max = +0.13 V) ALARM
in5: +0.56 V (min = +0.64 V, max = +2.05 V) ALARM
in6: +0.78 V (min = +3.87 V, max = +0.06 V) ALARM
in7: +3.36 V (min = +1.15 V, max = +0.58 V) ALARM
in8: +3.65 V (min = +0.08 V, max = +0.35 V) ALARM
fan1: 2191 RPM (min = 48214 RPM, div = 4) ALARM
fan2: 0 RPM (min = 2343 RPM, div = 4) ALARM
temp1: +35.0C (high = +0.0C, hyst = +2.0C) ALARM sensor = thermistor
temp2: +46.0C (high = +80.0C, hyst = +75.0C) sensor = thermistor
beep_enable:enabled


What Is wrong?

PS. I Thinnk I need working sensors before I find an application that monitor voltage during a longer time of time to see if the power supply work in properly.

Johnny3
February 23rd, 2011, 12:38 AM
You can install Xsensors software center.
New bee way.
GB Johnny

Azyx
February 23rd, 2011, 04:03 AM
You can install Xsensors software center.
New bee way.
GB Johnny

Thanx, that was nice, but my problem with false voltage are still there. My co,puter would not start if I don't have 12V.

Azyx
February 23rd, 2011, 01:32 PM
seems to be a naer 1 year old bug...

https://bugs.launchpad.net/ubuntu/+source/lm-sensors/+bug/563114

Is there a fix for it?