PDA

View Full Version : [SOLVED] Wireless Not Seeing Networks, Toshiba A505-S6005



gloria0227
April 19th, 2010, 05:36 AM
Hello,

My wireless is not working in Ubuntu 9.10. In the connection area wireless is not an option, I cant even see wireless networks. I read some posts at http://www.linwik.com/wiki/using+the+realtek+8172+and+8192se+wireless+control ler+with+ubuntu+9.10 and https://bugs.launchpad.net/ubuntu/+source/linux/+bug/401126 but the solutions do not work for me.

Below is some more information

lspci:

00:00.0 Host bridge: Intel Corporation Arrandale DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Arrandale Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
03:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01)
03:00.1 System peripheral: Ricoh Co Ltd Device e230 (rev 01)
03:00.2 System peripheral: Ricoh Co Ltd Device e852 (rev 01)
3f:00.0 Host bridge: Intel Corporation QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Device 2d12 (rev 02)
3f:02.3 Host bridge: Intel Corporation Device 2d13 (rev 02)
ifconfig:


eth0 Link encap:Ethernet HWaddr 00:26:6c:45:58:f1
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::226:6cff:fe45:58f1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2859 errors:0 dropped:0 overruns:0 frame:0
TX packets:2873 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2703461 (2.7 MB) TX bytes:872256 (872.2 KB)
Interrupt:34 Base address:0xc000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)

iwconfig:


lo no wireless extensions.

eth0 no wireless extensions.

lsmod:


Module Size Used by
snd_hda_codec_intelhdmi 14880 1
binfmt_misc 10220 1
snd_hda_codec_realtek 277860 1
ppdev 8232 0
joydev 13088 0
snd_hda_intel 31880 2
snd_hda_codec 87584 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_ hda_intel
snd_hwdep 9352 1 snd_hda_codec
snd_pcm_oss 44704 0
snd_mixer_oss 18976 1 snd_pcm_oss
snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 3460 0
snd_seq_oss 33440 0
snd_seq_midi 8192 0
snd_rawmidi 27296 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
iptable_filter 3872 0
snd_seq 60608 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
ip_tables 21200 1 iptable_filter
snd_timer 26992 2 snd_pcm,snd_seq
x_tables 25832 1 ip_tables
snd_seq_device 8308 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
psmouse 57124 0
snd 77096 17 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_ hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_ mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq, snd_timer,snd_seq_device
lp 11908 0
serio_raw 6596 0
parport 40528 2 ppdev,lp
sdhci_pci 8928 0
sdhci 20484 1 sdhci_pci
ndiswrapper 245248 0
led_class 5256 1 sdhci
soundcore 9088 1 snd
snd_page_alloc 10928 2 snd_hda_intel,snd_pcm
fbcon 41344 72
tileblit 3136 1 fbcon
font 8832 1 fbcon
bitblit 6688 1 fbcon
softcursor 2336 1 bitblit
i915 252424 1
drm 194400 1 i915
i2c_algo_bit 7076 1 i915
video 23612 1 i915
output 3680 1 video
r8169 38884 0
mii 6368 1 r8169
intel_agp 33040 2 i915
dmesg:



[ 18.727389] ACPI: SSDT 00000000bb691c18 003A6 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 18.728053] ACPI: SSDT 00000000bb68fa18 0045C (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 18.728721] Monitor-Mwait will be used to enter C-1 state
[ 18.728744] Monitor-Mwait will be used to enter C-2 state
[ 18.728766] Monitor-Mwait will be used to enter C-3 state
[ 18.728787] ACPI: CPU0 (power states: C1[C1] C3[C3])
[ 18.728803] processor LNXCPU:00: registered as cooling_device1
[ 18.728806] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 18.729504] ACPI: SSDT 00000000bb690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 18.730140] ACPI: SSDT 00000000bb68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 18.730959] ACPI: CPU1 (power states: C1[C1] C3[C3])
[ 18.730974] processor LNXCPU:01: registered as cooling_device2
[ 18.730977] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.732098] ACPI: CPU2 (power states: C1[C1] C3[C3])
[ 18.732115] processor LNXCPU:02: registered as cooling_device3
[ 18.732118] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 18.733226] ACPI: CPU3 (power states: C1[C1] C3[C3])
[ 18.733242] processor LNXCPU:03: registered as cooling_device4
[ 18.733245] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 18.733429] ACPI Error: Found unknown opcode 4 at AML address ffffc90000610d0f offset 0, ignoring 20090521 psloop-137
[ 18.733523] ACPI Error (psargs-0359): [WB0p] Namespace lookup failure, AE_NOT_FOUND
[ 18.733528] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.HSB2._STA] (Node ffff880133838f00), AE_NOT_FOUND
[ 18.733853] ACPI Error (psargs-0359): [G03S] Namespace lookup failure, AE_NOT_FOUND
[ 18.733858] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.VALZ._STA] (Node ffff880133839460), AE_NOT_FOUND
[ 18.733937] ACPI Error: Found unknown opcode 4 at AML address ffffc90000613459 offset 0, ignoring 20090521 psloop-137
[ 18.733942] ACPI Error: Found unknown opcode D6 at AML address ffffc9000061345a offset 1, ignoring 20090521 psloop-137
[ 18.733946] ACPI Error: Found unknown opcode 4 at AML address ffffc9000061345b offset 2, ignoring 20090521 psloop-137
[ 18.733961] ACPI Error (psargs-0359): [G�] Namespace lookup failure, AE_NOT_FOUND
[ 18.733965] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.FWEX._STA] (Node ffff8801338394e0), AE_NOT_FOUND
[ 18.737269] ACPI Exception: AE_OK, No or invalid critical threshold 20090521 thermal-384
[ 18.738082] Linux agpgart interface v0.103
[ 18.738090] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 18.739009] brd: module loaded
[ 18.739345] loop: module loaded
[ 18.739399] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 18.739474] ahci 0000:00:1f.2: version 3.0
[ 18.739488] ahci 0000:00:1f.2: can't derive routing for PCI INT B
[ 18.739491] ahci 0000:00:1f.2: PCI INT B: no GSI - using IRQ 11
[ 18.739538] alloc irq_desc for 33 on node 0
[ 18.739540] alloc kstat_irqs on node 0
[ 18.739549] ahci 0000:00:1f.2: irq 33 for MSI/MSI-X
[ 18.739586] ahci: SSS flag set, parallel bus scan disabled
[ 18.739636] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 18.739639] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems
[ 18.739644] ahci 0000:00:1f.2: setting latency timer to 64
[ 18.802275] scsi0 : ahci
[ 18.802360] scsi1 : ahci
[ 18.802403] scsi2 : ahci
[ 18.802442] scsi3 : ahci
[ 18.802483] scsi4 : ahci
[ 18.802526] scsi5 : ahci
[ 18.803066] ata1: SATA max UDMA/133 abar m2048@0xd8405000 port 0xd8405100 irq 33
[ 18.803070] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 33
[ 18.803072] ata3: DUMMY
[ 18.803073] ata4: DUMMY
[ 18.803076] ata5: SATA max UDMA/133 abar m2048@0xd8405000 port 0xd8405300 irq 33
[ 18.803079] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 33
[ 18.803739] Fixed MDIO Bus: probed
[ 18.803768] PPP generic driver version 2.4.2
[ 18.803837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 18.803870] ehci_hcd 0000:00:1a.0: can't derive routing for PCI INT A
[ 18.803873] ehci_hcd 0000:00:1a.0: PCI INT A: no GSI - using IRQ 5
[ 18.803894] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 18.803899] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 18.803933] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 18.807844] ehci_hcd 0000:00:1a.0: debug port 2
[ 18.807850] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 18.807864] ehci_hcd 0000:00:1a.0: irq 5, io mem 0xd8405c00
[ 18.832138] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 18.832241] usb usb1: configuration #1 chosen from 1 choice
[ 18.832265] hub 1-0:1.0: USB hub found
[ 18.832271] hub 1-0:1.0: 3 ports detected
[ 18.832338] ehci_hcd 0000:00:1d.0: can't derive routing for PCI INT A
[ 18.832340] ehci_hcd 0000:00:1d.0: PCI INT A: no GSI - using IRQ 10
[ 18.832355] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 18.832358] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 18.832384] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 18.836288] ehci_hcd 0000:00:1d.0: debug port 2
[ 18.836295] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 18.836308] ehci_hcd 0000:00:1d.0: irq 10, io mem 0xd8405800
[ 18.862073] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 18.862172] usb usb2: configuration #1 chosen from 1 choice
[ 18.862191] hub 2-0:1.0: USB hub found
[ 18.862196] hub 2-0:1.0: 3 ports detected
[ 18.862242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.862254] uhci_hcd: USB Universal Host Controller Interface driver
[ 18.862335] PNP: No PS/2 controller found. Probing ports directly.
[ 18.892438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.892444] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.892493] mice: PS/2 mouse device common for all mice
[ 18.892577] rtc_cmos 00:05: RTC can wake from S4
[ 18.892603] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 18.892639] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 18.892741] device-mapper: uevent: version 1.0.3
[ 18.892809] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 18.892882] device-mapper: multipath: version 1.1.0 loaded
[ 18.892886] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 18.893131] cpuidle: using governor ladder
[ 18.893627] cpuidle: using governor menu
[ 18.894002] TCP cubic registered
[ 18.894111] NET: Registered protocol family 10
[ 18.894515] lo: Disabled Privacy Extensions
[ 18.894771] NET: Registered protocol family 17
[ 18.894788] Bluetooth: L2CAP ver 2.13
[ 18.894789] Bluetooth: L2CAP socket layer initialized
[ 18.894791] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.894793] Bluetooth: SCO socket layer initialized
[ 18.894817] Bluetooth: RFCOMM TTY layer initialized
[ 18.894820] Bluetooth: RFCOMM socket layer initialized
[ 18.894821] Bluetooth: RFCOMM ver 1.11
[ 18.896668] PM: Resume from disk failed.
[ 18.896678] registered taskstats version 1
[ 18.896810] Magic number: 6:844:150
[ 18.896824] bdi 1:2: hash matches
[ 18.896864] acpi INT0800:00: hash matches
[ 18.896903] rtc_cmos 00:05: setting system clock to 2010-04-18 23:06:29 UTC (1271631989)
[ 18.896907] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.896908] EDD information not available.
[ 18.924591] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 19.143438] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 19.153377] ata1: SATA link down (SStatus 0 SControl 300)
[ 19.919917] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 19.920723] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 succeeded
[ 19.920761] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[ 19.920769] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[ 19.920800] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 succeeded
[ 20.286629] ata2.00: ATA-8: TOSHIBA MK5055GSX, FG001M, max UDMA/100
[ 20.286634] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 20.287681] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 succeeded
[ 20.287722] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 succeeded
[ 20.287726] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[ 20.287775] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 succeeded
[ 20.288439] ata2.00: configured for UDMA/100
[ 20.299249] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
[ 20.299352] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 20.299410] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 20.299473] sd 1:0:0:0: [sda] Write Protect is off
[ 20.299476] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.299501] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.299607] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 20.364685] sd 1:0:0:0: [sda] Attached SCSI disk
[ 20.648425] ata5: SATA link down (SStatus 0 SControl 300)
[ 21.418774] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.423926] ata6.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 21.424429] ata6.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 21.424437] ata6.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[ 21.424932] ata6.00: ACPI cmd ef/10:05:00:00:00:b0 succeeded
[ 21.429774] ata6.00: ATAPI: HL-DT-ST DVDRAM GT20F, ET11, max UDMA/133, ATAPI AN
[ 21.435099] ata6.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 21.435602] ata6.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 21.435609] ata6.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
[ 21.436126] ata6.00: configured for UDMA/133
[ 21.459944] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20F ET11 PQ: 0 ANSI: 5
[ 21.471100] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.471106] Uniform CD-ROM driver Revision: 3.20
[ 21.471204] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 21.471235] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 21.471256] Freeing unused kernel memory: 664k freed
[ 21.471385] Write protecting the kernel read-only data: 7596k
[ 21.559762] agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset
[ 21.560482] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 21.569007] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 21.580717] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.580755] pcieport-driver 0000:00:1c.0: can't derive routing for PCI INT A
[ 21.580758] r8169 0000:01:00.0: PCI INT A: no GSI - using IRQ 5
[ 21.580882] r8169 0000:01:00.0: setting latency timer to 64
[ 21.581054] alloc irq_desc for 34 on node 0
[ 21.581057] alloc kstat_irqs on node 0
[ 21.581110] r8169 0000:01:00.0: irq 34 for MSI/MSI-X
[ 21.581877] eth0: RTL8102e at 0xffffc9000067c000, 00:26:6c:45:58:f1, XID 24c00000 IRQ 34
[ 21.601967] [drm] Initialized drm 1.1.0 20060810
[ 21.611383] i915 0000:00:02.0: can't derive routing for PCI INT A
[ 21.611386] i915 0000:00:02.0: PCI INT A: no GSI - using IRQ 5
[ 21.611391] i915 0000:00:02.0: setting latency timer to 64
[ 21.624075] mtrr: no more MTRRs available
[ 21.624079] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 21.624372] alloc irq_desc for 35 on node 0
[ 21.624378] alloc kstat_irqs on node 0
[ 21.624392] i915 0000:00:02.0: irq 35 for MSI/MSI-X
[ 21.731834] [drm] i2c_init DPDDC-C
[ 21.856842] i2c-adapter i2c-2: unable to read EDID block.
[ 21.856845] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 21.868337] [drm] fb0: inteldrmfb frame buffer device
[ 21.868432] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 22.149426] [drm] LVDS-8: set mode 1366x768 12
[ 22.585999] Console: switching to colour frame buffer device 170x48
[ 22.943940] PM: Starting manual resume from disk
[ 22.943944] PM: Resume from partition 8:5
[ 22.943946] PM: Checking hibernation image.
[ 22.944068] PM: Resume from disk failed.
[ 22.974397] EXT4-fs (sda6): barriers enabled
[ 22.998521] kjournald2 starting: pid 403, dev sda6:8, commit interval 5 seconds
[ 22.998641] EXT4-fs (sda6): delayed allocation enabled
[ 22.998645] EXT4-fs: file extents enabled
[ 23.024382] EXT4-fs: mballoc enabled
[ 23.024398] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 23.617040] type=1505 audit(1271631994.226:2): operation="profile_load" pid=430 name=/usr/share/gdm/guest-session/Xsession
[ 23.626498] type=1505 audit(1271631994.236:3): operation="profile_load" pid=431 name=/sbin/dhclient3
[ 23.627002] type=1505 audit(1271631994.236:4): operation="profile_load" pid=431 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 23.627278] type=1505 audit(1271631994.236:5): operation="profile_load" pid=431 name=/usr/lib/connman/scripts/dhclient-script
[ 23.674978] type=1505 audit(1271631994.286:6): operation="profile_load" pid=432 name=/usr/bin/evince
[ 23.683217] type=1505 audit(1271631994.286:7): operation="profile_load" pid=432 name=/usr/bin/evince-previewer
[ 23.688093] type=1505 audit(1271631994.296:8): operation="profile_load" pid=432 name=/usr/bin/evince-thumbnailer
[ 23.708867] type=1505 audit(1271631994.316:9): operation="profile_load" pid=434 name=/usr/lib/cups/backend/cups-pdf
[ 23.709472] type=1505 audit(1271631994.316:10): operation="profile_load" pid=434 name=/usr/sbin/cupsd
[ 23.730264] type=1505 audit(1271631994.336:11): operation="profile_load" pid=435 name=/usr/sbin/mysqld-akonadi
[ 23.754748] type=1505 audit(1271631994.366:12): operation="profile_load" pid=436 name=/usr/sbin/tcpdump
[ 24.133218] ehci_hcd 0000:00:1a.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 30.877508] udev: starting version 147
[ 30.900226] Adding 4881400k swap on /dev/sda5. Priority:-1 extents:1 across:4881400k
[ 30.909740] Disabling lock debugging due to kernel taint
[ 30.949456] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 30.952920] sdhci: Secure Digital Host Controller Interface driver
[ 30.952924] sdhci: Copyright(c) Pierre Ossman
[ 30.962678] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 30.962704] pcieport-driver 0000:00:1c.3: can't derive routing for PCI INT D
[ 30.962707] sdhci-pci 0000:03:00.0: PCI INT D: no GSI - using IRQ 11
[ 30.962776] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 30.962790] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 30.963854] Registered led device: mmc0::
[ 30.963900] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 30.987522] lp: driver loaded but no devices found
[ 30.991483] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.050539] HDA Intel 0000:00:1b.0: can't derive routing for PCI INT A
[ 31.050543] HDA Intel 0000:00:1b.0: PCI INT A: no GSI - using IRQ 11
[ 31.050666] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 31.398975] EXT4-fs (sda6): internal journal on sda6:8
[ 31.569138] r8169: eth0: link up
[ 31.569156] r8169: eth0: link up
[ 31.646788] type=1505 audit(1271650002.266:13): operation="profile_replace" pid=931 name=/usr/share/gdm/guest-session/Xsession
[ 31.648166] type=1505 audit(1271650002.276:14): operation="profile_replace" pid=932 name=/sbin/dhclient3
[ 31.648681] type=1505 audit(1271650002.276:15): operation="profile_replace" pid=932 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 31.648963] type=1505 audit(1271650002.276:16): operation="profile_replace" pid=932 name=/usr/lib/connman/scripts/dhclient-script
[ 31.651379] type=1505 audit(1271650002.276:17): operation="profile_replace" pid=933 name=/usr/bin/evince
[ 31.659987] type=1505 audit(1271650002.286:18): operation="profile_replace" pid=933 name=/usr/bin/evince-previewer
[ 31.664917] type=1505 audit(1271650002.286:19): operation="profile_replace" pid=933 name=/usr/bin/evince-thumbnailer
[ 31.672028] type=1505 audit(1271650002.296:20): operation="profile_replace" pid=935 name=/usr/lib/cups/backend/cups-pdf
[ 31.672622] type=1505 audit(1271650002.296:21): operation="profile_replace" pid=935 name=/usr/sbin/cupsd
[ 31.674353] type=1505 audit(1271650002.296:22): operation="profile_replace" pid=936 name=/usr/sbin/mysqld-akonadi
[ 31.902758] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1e0b1, caps: 0xd04731/0xa40000
[ 31.972092] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 32.074053] ppdev: user-space parallel port driver
[ 32.136645] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 32.222129] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
[ 32.222927] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 32.528380] CPU0 attaching NULL sched-domain.
[ 32.528385] CPU1 attaching NULL sched-domain.
[ 32.528388] CPU2 attaching NULL sched-domain.
[ 32.528390] CPU3 attaching NULL sched-domain.
[ 32.538181] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'PoUnregisterPowerSettingCallback'
[ 32.538188] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'PoRegisterPowerSettingCallback'
[ 32.538198] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'IoWMIOpenBlock'
[ 32.538203] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'IoWMIQueryAllData'
[ 32.538211] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 32.538217] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList'
[ 32.538222] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateMdl'
[ 32.538227] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMDeregisterScatterGatherDma'
[ 32.538232] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMFreeNetBufferSGList'
[ 32.538240] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList'
[ 32.538245] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeMdl'
[ 32.538250] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete'
[ 32.538257] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority'
[ 32.538280] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes'
[ 32.538285] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx'
[ 32.538298] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx'
[ 32.538303] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete'
[ 32.538316] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 32.538321] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[ 32.538326] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem'
[ 32.538331] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMAllocateNetBufferSGList'
[ 32.538340] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMAllocatePort'
[ 32.538345] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMNetPnPEvent'
[ 32.538350] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMFreePort'
[ 32.538358] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSetBusData'
[ 32.538363] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMGetBusData'
[ 32.538369] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver'
[ 32.538374] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMDeregisterInterruptEx'
[ 32.538385] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMRegisterScatterGatherDma'
[ 32.538391] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSynchronizeWithInterruptEx'
[ 32.538396] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMRegisterInterruptEx'
[ 32.538401] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool'
[ 32.538406] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool'
[ 32.538412] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver'
[ 32.538414] ndiswrapper (load_sys_files:206): couldn't prepare driver 'net8192se'
[ 32.538784] ndiswrapper (load_wrap_driver:108): couldn't load driver net8192se; check system log for messages from 'loadndisdriver'
[ 32.563959] CPU0 attaching sched-domain:
[ 32.563963] domain 0: span 0-1 level SIBLING
[ 32.563965] groups: 0 1
[ 32.563968] domain 1: span 0-3 level MC
[ 32.563970] groups: 0-1 2-3
[ 32.563974] domain 2: span 0-3 level CPU
[ 32.563975] groups: 0-3 (__cpu_power = 2048)
[ 32.563980] CPU1 attaching sched-domain:
[ 32.563982] domain 0: span 0-1 level SIBLING
[ 32.563984] groups: 1 0
[ 32.563986] domain 1: span 0-3 level MC
[ 32.563988] groups: 0-1 2-3
[ 32.563991] domain 2: span 0-3 level CPU
[ 32.563993] groups: 0-3 (__cpu_power = 2048)
[ 32.563996] CPU2 attaching sched-domain:
[ 32.563998] domain 0: span 2-3 level SIBLING
[ 32.563999] groups: 2 3
[ 32.564002] domain 1: span 0-3 level MC
[ 32.564004] groups: 2-3 0-1
[ 32.564007] domain 2: span 0-3 level CPU
[ 32.564009] groups: 0-3 (__cpu_power = 2048)
[ 32.564012] CPU3 attaching sched-domain:
[ 32.564014] domain 0: span 2-3 level SIBLING
[ 32.564016] groups: 3 2
[ 32.564018] domain 1: span 0-3 level MC
[ 32.564020] groups: 2-3 0-1
[ 32.564023] domain 2: span 0-3 level CPU
[ 32.564025] groups: 0-3 (__cpu_power = 2048)
[ 32.564541] CPU0 attaching NULL sched-domain.
[ 32.564544] CPU1 attaching NULL sched-domain.
[ 32.564547] CPU2 attaching NULL sched-domain.
[ 32.564548] CPU3 attaching NULL sched-domain.
[ 32.603914] CPU0 attaching sched-domain:
[ 32.603917] domain 0: span 0-1 level SIBLING
[ 32.603919] groups: 0 1
[ 32.603922] domain 1: span 0-3 level MC
[ 32.603924] groups: 0-1 (__cpu_power = 2048) 2-3 (__cpu_power = 2048)
[ 32.603929] CPU1 attaching sched-domain:
[ 32.603931] domain 0: span 0-1 level SIBLING
[ 32.603933] groups: 1 0
[ 32.603936] domain 1: span 0-3 level MC
[ 32.603937] groups: 0-1 (__cpu_power = 2048) 2-3 (__cpu_power = 2048)
[ 32.603942] CPU2 attaching sched-domain:
[ 32.603944] domain 0: span 2-3 level SIBLING
[ 32.603945] groups: 2 3
[ 32.603948] domain 1: span 0-3 level MC
[ 32.603950] groups: 2-3 (__cpu_power = 2048) 0-1 (__cpu_power = 2048)
[ 32.603955] CPU3 attaching sched-domain:
[ 32.603956] domain 0: span 2-3 level SIBLING
[ 32.603958] groups: 3 2
[ 32.603961] domain 1: span 0-3 level MC
[ 32.603962] groups: 2-3 (__cpu_power = 2048) 0-1 (__cpu_power = 2048)
[ 34.679625] usb 1-1: device not accepting address 2, error -110
[ 34.799326] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 42.313937] eth0: no IPv6 routers present
[ 50.333453] usb 1-1: device not accepting address 3, error -110
[ 50.453141] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 60.864596] usb 1-1: device not accepting address 4, error -110
[ 60.986150] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 71.397712] usb 1-1: device not accepting address 5, error -110
[ 71.397738] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 71.539259] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 76.524601] ehci_hcd 0000:00:1d.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 87.067641] usb 2-1: device not accepting address 2, error -110
[ 87.187359] usb 2-1: new high speed USB device using ehci_hcd and address 3
[ 102.717637] usb 2-1: device not accepting address 3, error -110
[ 102.839184] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 113.252537] usb 2-1: device not accepting address 4, error -110
[ 113.370427] usb 2-1: new high speed USB device using ehci_hcd and address 5
[ 123.785618] usb 2-1: device not accepting address 5, error -110
[ 123.785638] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 123.805659] usbcore: registered new interface driver ndiswrapper
[ 124.235828] CPU0 attaching NULL sched-domain.
[ 124.235838] CPU1 attaching NULL sched-domain.
[ 124.235843] CPU2 attaching NULL sched-domain.
[ 124.235847] CPU3 attaching NULL sched-domain.
[ 124.274478] CPU0 attaching sched-domain:
[ 124.274483] domain 0: span 0-1 level SIBLING
[ 124.274486] groups: 0 1
[ 124.274491] domain 1: span 0-3 level MC
[ 124.274494] groups: 0-1 (__cpu_power = 2048) 2-3 (__cpu_power = 2048)
[ 124.274502] CPU1 attaching sched-domain:
[ 124.274504] domain 0: span 0-1 level SIBLING
[ 124.274507] groups: 1 0
[ 124.274511] domain 1: span 0-3 level MC
[ 124.274514] groups: 0-1 (__cpu_power = 2048) 2-3 (__cpu_power = 2048)
[ 124.274520] CPU2 attaching sched-domain:
[ 124.274523] domain 0: span 2-3 level SIBLING
[ 124.274525] groups: 2 3
[ 124.274529] domain 1: span 0-3 level MC
[ 124.274532] groups: 2-3 (__cpu_power = 2048) 0-1 (__cpu_power = 2048)
[ 124.274538] CPU3 attaching sched-domain:
[ 124.274541] domain 0: span 2-3 level SIBLING
[ 124.274543] groups: 3 2
[ 124.274547] domain 1: span 0-3 level MC
[ 124.274550] groups: 2-3 (__cpu_power = 2048) 0-1 (__cpu_power = 2048)
[ 124.275058] CPU0 attaching NULL sched-domain.
[ 124.275062] CPU1 attaching NULL sched-domain.
[ 124.275064] CPU2 attaching NULL sched-domain.
[ 124.275067] CPU3 attaching NULL sched-domain.
[ 124.314340] CPU0 attaching sched-domain:
[ 124.314345] domain 0: span 0-1 level SIBLING
[ 124.314349] groups: 0 1
[ 124.314353] domain 1: span 0-3 level MC
[ 124.314356] groups: 0-1 2-3
[ 124.314363] CPU1 attaching sched-domain:
[ 124.314365] domain 0: span 0-1 level SIBLING
[ 124.314368] groups: 1 0
[ 124.314372] domain 1: span 0-3 level MC
[ 124.314374] groups: 0-1 2-3
[ 124.314379] CPU2 attaching sched-domain:
[ 124.314381] domain 0: span 2-3 level SIBLING
[ 124.314384] groups: 2 3
[ 124.314388] domain 1: span 0-3 level MC
[ 124.314390] groups: 2-3 0-1
[ 124.314395] CPU3 attaching sched-domain:
[ 124.314397] domain 0: span 2-3 level SIBLING
[ 124.314400] groups: 3 2
[ 124.314404] domain 1: span 0-3 level MC
[ 124.314407] groups: 2-3 0-1



sudo lshw -C network:


*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 02
serial: 00:26:6c:45:58:f1
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.6 latency=0 link=yes multicast=yes port=MII speed=100MB/s
resources: irq:34 ioport:4000(size=256) memory:d0410000-d0410fff(prefetchable) memory:d0400000-d040ffff(prefetchable) memory:d0420000-d043ffff(prefetchable)
*-network UNCLAIMED
description: Network controller
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: ioport:3000(size=256) memory:d6400000-d6403fff
iwlist scan:


lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.lsb_release -d:


Description: Ubuntu 9.10
uname -mr:


2.6.31-20-generic x86_64sudo /etc/init.d/networking restart:


* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
[ OK ]



Thank you very much for your help!!!

hostilejosh
April 19th, 2010, 10:03 AM
i am having same problem but on a dell inspiron 1545, internet works fine in windows vista, and worked in 9.04, but now nothing, kaput, rendering ubuntu useless.

pmp6nl
April 21st, 2010, 05:32 AM
Maybe take a look at http://ubuntuforums.org/showpost.php?p=9009017&postcount=26 and related posts. That has been said to work. :) Good luck.

gloria0227
May 21st, 2010, 09:26 PM
I followed the steps at http://ubuntuforums.org/showpost.php?p=9009017&postcount=26 and it works!