View Full Version : [ubuntu] Issues setting up file sharing in a home network
January 6th, 2010, 04:33 PM
If anyone has any insight this would be very helpful for me... I have a home network with two desktops and I also have a netbook. The netbook and nettop (desktop) both run UNR 9.10 and my other desktop runs Ubuntu 9.10 with all updates in place. So all 3 machines are hooked up to my home network via wireless router (secure and password protect). I want to set up file shares between machines in order to move files between machines and also to have all machines connected to and accessing one shared printer. Fair enough. According to Ubuntu help I click on a folder, then properties then the share tab and click all checkboxes and give the share a name. Then I do likewise on my two other machines. So in theory once every machine has a share setup then you should be able to access via the other machines by simply going into Network, finding the machine, opening it and mounting the shared folder. In some cases I see the other machines but when I click to open them it says "unable to mount location". So now I would like to ask... where should I look to resolve this? The wireless router settings? Some type of network or security settings on each of my machines? If someone could guide me to troubleshoot this, that would be lovely.
January 6th, 2010, 05:33 PM
I always like to start with some basic "discovery" commands that will tell me the state of my network. Post the output of the following commands from one of the machines you are trying to access:
Type net usershare info
Type sudo net usershare info
Type testparm -s
Type nmap -sT 192.168.0.100/22
Change 192.168.0.100 to the ip address of the machine you're using.
You may not have nmap installed but when you issue the nmap command it will ask you if you want to install it - you do. Once it's installed run the nmap command again.
January 6th, 2010, 08:05 PM
robbie@robbie-laptop:~$ net usershare info
sudo net usershare info = nothing
robbie@robbie-laptop:~$ testparm -s
Load smb config files from /etc/samba/smb.conf
Processing section "[printers]"
Processing section "[print$]"
Loaded services file OK.
Server role: ROLE_STANDALONE
server string = %h server (Samba, Ubuntu)
map to guest = Bad User
obey pam restrictions = Yes
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
unix password sync = Yes
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
dns proxy = No
usershare allow guests = Yes
panic action = /usr/share/samba/panic-action %d
comment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No
browsable = No
comment = Printer Drivers
path = /var/lib/samba/printers
\\ROBBIE-LAPTOP robbie-laptop server (Samba, Ubuntu)
\\ROBBIE-LAPTOP\IPC$ IPC Service (robbie-laptop server (Samba, Ubuntu))
\\ROBBIE-LAPTOP\print$ Printer Drivers
robbie@robbie-laptop:~$ find smb
find: `smb': No such file or directory
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
192.168.1.122 ROBBIE-LAPTOP +[WORKGROUP] [Unix] [Samba 3.4.0]
Starting Nmap 5.00 ( http://nmap.org ) at 2010-01-06 13:57 EST
Interesting ports on 192.168.1.122:
Not shown: 998 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
445/tcp open microsoft-ds
Nmap done: 1 IP address (1 host up) scanned in 11.74 seconds
January 6th, 2010, 08:18 PM
Well, your share definition and smb.conf file seems to be OK. The problem is with smbtree and nmap. There's only one machine on your network and that's ROBBIE-LAPTOP.
The first thing I would do is disable any firewalls you have on any of the machines. If you've done a standard install and haven't changed the firewall I'd leave it alone.
Is 192.168.1.122 ROBBIE-LAPTOP ?
January 6th, 2010, 08:50 PM
Is 192.168.1.122 ROBBIE-LAPTOP ? ==> YES
Your help is very much appreciated!
January 6th, 2010, 09:04 PM
I take it disabling any firewall did nothing?
What's odd about nmap is that it doesn't even display the router's ip address. Can you ping any of the the other machines on the network. ?
By ping I mean in a terminal type: ping 192.168.0.100 where 192.168.0.100 is the ip address of another box on the network.
January 6th, 2010, 11:14 PM
You do not have the same problem since your error message isn't listed in the original posters output. Please start your own thread.
This forum is chaotic enough without these side trips ;)
Powered by vBulletin® Version 4.2.2 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.