PDA

View Full Version : [SOLVED] CDROM won't recognize cds/dvds on ubuntu 9.10



frojnd
November 4th, 2009, 06:27 PM
Hello there.

I am having problem with cdrom on acer aspire 5410 with ubuntu 9.10.
When I insert a cd or dvd ubuntu won't recognize it. Also when I try to eject it it won't eject it the first time I press the eject buttong. I have to press a couple of times before it actually eject it.

I have no idea how to solve this problem since before I hadn't had any hardware problems at all :S

I heard dmesg tells what's wrong so here is the dmesg output when I put in DVD and then try to eject it:


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007b9f0000 (usable)
[ 0.000000] BIOS-e820: 000000007b9f0000 - 000000007ba3f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ba3f000 - 000000007ba57000 (usable)
[ 0.000000] BIOS-e820: 000000007ba57000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bade000 (usable)
[ 0.000000] BIOS-e820: 000000007bade000 - 000000007baf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007baf7000 - 000000007bb00000 (usable)
[ 0.000000] BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x7bb00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007b9f0000 (usable)
[ 0.000000] modified: 000000007b9f0000 - 000000007ba3f000 (ACPI NVS)
[ 0.000000] modified: 000000007ba3f000 - 000000007ba57000 (usable)
[ 0.000000] modified: 000000007ba57000 - 000000007babf000 (reserved)
[ 0.000000] modified: 000000007babf000 - 000000007bade000 (usable)
[ 0.000000] modified: 000000007bade000 - 000000007baf7000 (ACPI data)
[ 0.000000] modified: 000000007baf7000 - 000000007bb00000 (usable)
[ 0.000000] modified: 000000007bb00000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a6000 - 37fef91b
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff691b
[ 0.000000] Move RAMDISK from 00000000378a6000 - 0000000037fef91a to 008ad000 - 00ff691a
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7baf6120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 7baf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 000F4240)
[ 0.000000] ACPI: DSDT 7bae5000 0A592 (v01 ACER ACER 00000001 1025 20051117)
[ 0.000000] ACPI: FACS 7b9fd000 00040
[ 0.000000] ACPI: DMAR 7baf5000 00060 (v01  00000001 00000000)
[ 0.000000] ACPI: HPET 7baf3000 00038 (v01 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: APIC 7baf2000 0006C (v02 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: MCFG 7baf1000 0003C (v01 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: ASF! 7baf0000 000A5 (v32 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: SLIC 7bae4000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 000F4240)
[ 0.000000] ACPI: BOOT 7bae3000 00028 (v01 ACER ACER 00000001 1025 00000001)
[ 0.000000] ACPI: SSDT 7bae2000 0031A (v01 ACER ACER 00001000 1025 20051117)
[ 0.000000] ACPI: SSDT 7badf000 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 7bade000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1091MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac258] BRK ==> [00008a9000 - 00008ac258]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff691b] NEW RAMDISK ==> [00008ad000 - 0000ff691b]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bb00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007b9f0
[ 0.000000] 0: 0x0007ba3f -> 0x0007ba57
[ 0.000000] 0: 0x0007babf -> 0x0007bade
[ 0.000000] 0: 0x0007baf7 -> 0x0007bb00
[ 0.000000] On node 0 totalpages: 506314
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2183 pages used for memmap
[ 0.000000] HighMem zone: 276907 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1f82000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502355
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=a808f8e3-9fca-4328-ac37-bae2d9ed0268 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10132480 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bb00)
[ 0.000000] Memory: 1982164k/2026496k available (4565k kernel code, 42148k reserved, 2143k data, 540k init, 1116360k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1196.751 MHz processor.
[ 0.001491] Console: colour VGA+ 80x25
[ 0.001496] console [tty0] enabled
[ 0.001751] hpet clockevent registered
[ 0.001756] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.001764] Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.50 BogoMIPS (lpj=4787004)
[ 0.001788] Security Framework initialized
[ 0.001814] AppArmor: AppArmor initialized
[ 0.001824] Mount-cache hash table entries: 512
[ 0.001994] Initializing cgroup subsys ns
[ 0.002001] Initializing cgroup subsys cpuacct
[ 0.002008] Initializing cgroup subsys memory
[ 0.002017] Initializing cgroup subsys freezer
[ 0.002020] Initializing cgroup subsys net_cls
[ 0.002041] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002045] CPU: L2 cache: 1024K
[ 0.002052] mce: CPU supports 6 MCE banks
[ 0.002061] CPU0: Thermal monitoring handled by SMI
[ 0.002067] using mwait in idle threads.
[ 0.002075] Performance Counters: Core2 events, Intel PMU driver.
[ 0.002087] ... version: 2
[ 0.002090] ... bit width: 40
[ 0.002093] ... generic counters: 2
[ 0.002095] ... value mask: 000000ffffffffff
[ 0.002099] ... max period: 000000007fffffff
[ 0.002102] ... fixed-purpose counters: 3
[ 0.002104] ... counter mask: 0000000700000003
[ 0.002113] Checking 'hlt' instruction... OK.
[ 0.017279] SMP alternatives: switching to UP code
[ 0.028007] ACPI: Core revision 20090521
[ 0.056425] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097104] CPU0: Intel(R) Celeron(R) CPU 723 @ 1.20GHz stepping 0a
[ 0.100001] Brought up 1 CPUs
[ 0.100001] Total of 1 processors activated (2393.50 BogoMIPS).
[ 0.100001] CPU0 attaching NULL sched-domain.
[ 0.100001] Booting paravirtualized kernel on bare hardware
[ 0.100001] regulator: core version 0.5
[ 0.100001] Time: 17:14:12 Date: 11/04/09
[ 0.100001] NET: Registered protocol family 16
[ 0.100001] EISA bus registered
[ 0.100001] ACPI: bus type pci registered
[ 0.100001] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.100001] PCI: MCFG area at f8000000 reserved in E820
[ 0.100001] PCI: Using MMCONFIG for extended config space
[ 0.100001] PCI: Using configuration type 1 for base access
[ 0.100001] bio: create slab <bio-0> at 0
[ 0.100302] ACPI: EC: Look up EC in DSDT
[ 0.109177] ACPI: BIOS _OSI(Linux) query ignored
[ 0.110254] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.148059] ACPI: Interpreter enabled
[ 0.148065] ACPI: (supports S0 S3 S4 S5)
[ 0.148112] ACPI: Using IOAPIC for interrupt routing
[ 0.189619] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.189623] ACPI: EC: driver started in interrupt mode
[ 0.190151] ACPI: No dock devices found.
[ 0.190914] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.191037] pci 0000:00:02.0: reg 10 64bit mmio: [0x90000000-0x903fffff]
[ 0.191049] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
[ 0.191056] pci 0000:00:02.0: reg 20 io port: [0x4110-0x4117]
[ 0.191112] pci 0000:00:02.1: reg 10 64bit mmio: [0x000000-0x0fffff]
[ 0.191275] pci 0000:00:1a.0: reg 20 io port: [0x40e0-0x40ff]
[ 0.191413] pci 0000:00:1a.1: reg 20 io port: [0x40c0-0x40df]
[ 0.191531] pci 0000:00:1a.7: reg 10 32bit mmio: [0x94405c00-0x94405fff]
[ 0.191611] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.191617] pci 0000:00:1a.7: PME# disabled
[ 0.191680] pci 0000:00:1b.0: reg 10 64bit mmio: [0x94400000-0x94403fff]
[ 0.191750] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.191756] pci 0000:00:1b.0: PME# disabled
[ 0.191852] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.191859] pci 0000:00:1c.0: PME# disabled
[ 0.191955] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.192007] pci 0000:00:1c.1: PME# disabled
[ 0.192119] pci 0000:00:1d.0: reg 20 io port: [0x40a0-0x40bf]
[ 0.192256] pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
[ 0.192395] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
[ 0.192513] pci 0000:00:1d.3: reg 20 io port: [0x4040-0x405f]
[ 0.192632] pci 0000:00:1d.7: reg 10 32bit mmio: [0x94405800-0x94405bff]
[ 0.192712] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.192718] pci 0000:00:1d.7: PME# disabled
[ 0.192979] pci 0000:00:1f.2: reg 10 io port: [0x4108-0x410f]
[ 0.192989] pci 0000:00:1f.2: reg 14 io port: [0x411c-0x411f]
[ 0.192998] pci 0000:00:1f.2: reg 18 io port: [0x4100-0x4107]
[ 0.193008] pci 0000:00:1f.2: reg 1c io port: [0x4118-0x411b]
[ 0.193018] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f]
[ 0.193028] pci 0000:00:1f.2: reg 24 32bit mmio: [0x94405000-0x944057ff]
[ 0.193079] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.193085] pci 0000:00:1f.2: PME# disabled
[ 0.193131] pci 0000:00:1f.3: reg 10 64bit mmio: [0x94406000-0x944060ff]
[ 0.193154] pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
[ 0.193231] pci 0000:00:1f.6: reg 10 64bit mmio: [0x94404000-0x94404fff]
[ 0.193371] pci 0000:01:00.0: reg 10 64bit mmio: [0x93400000-0x9343ffff]
[ 0.193384] pci 0000:01:00.0: reg 18 io port: [0x3000-0x307f]
[ 0.193469] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193476] pci 0000:01:00.0: PME# disabled
[ 0.193555] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.193562] pci 0000:00:1c.0: bridge 32bit mmio: [0x93400000-0x943fffff]
[ 0.193572] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x90400000-0x913fffff]
[ 0.193649] pci 0000:02:00.0: reg 10 64bit mmio: [0x92400000-0x9240ffff]
[ 0.193741] pci 0000:02:00.0: supports D1
[ 0.193745] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.193752] pci 0000:02:00.0: PME# disabled
[ 0.193838] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 0.193845] pci 0000:00:1c.1: bridge 32bit mmio: [0x92400000-0x933fffff]
[ 0.193854] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x91400000-0x923fffff]
[ 0.193924] pci 0000:00:1e.0: transparent bridge
[ 0.193959] pci_bus 0000:00: on NUMA node 0
[ 0.193971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.194501] ACPI Warning: \_SB_.PCI0.P32_._PRT: Return Package has no elements (empty) 20090521 nspredef-434
[ 0.194611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.194778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.222673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.222898] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.223120] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.223339] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.223560] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.223781] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.224013] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.224234] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.224541] SCSI subsystem initialized
[ 0.224605] libata version 3.00 loaded.
[ 0.224705] usbcore: registered new interface driver usbfs
[ 0.224727] usbcore: registered new interface driver hub
[ 0.224760] usbcore: registered new device driver usb
[ 0.225056] ACPI: WMI: Mapper loaded
[ 0.225059] PCI: Using ACPI for IRQ routing
[ 0.225274] Bluetooth: Core ver 2.15
[ 0.225313] NET: Registered protocol family 31
[ 0.225316] Bluetooth: HCI device and connection manager initialized
[ 0.225319] Bluetooth: HCI socket layer initialized
[ 0.225322] NetLabel: Initializing
[ 0.225324] NetLabel: domain hash size = 128
[ 0.225326] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.225343] NetLabel: unlabeled traffic allowed by default
[ 0.225381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.225389] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.229904] pnp: PnP ACPI init
[ 0.229929] ACPI: bus type pnp registered
[ 0.233090] pnp: PnP ACPI: found 9 devices
[ 0.233094] ACPI: ACPI bus type pnp unregistered
[ 0.233098] PnPBIOS: Disabled by ACPI PNP
[ 0.233114] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 0.233120] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.233124] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.233128] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.233132] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.233137] system 00:01: ioport range 0x820-0x823 has been reserved
[ 0.233141] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.233145] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.233150] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.233155] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.233159] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.233164] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.233168] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.233173] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.233177] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.233182] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.233186] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.233191] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.233195] system 00:01: iomem range 0xff800000-0xff800fff has been reserved
[ 0.267927] AppArmor: AppArmor Filesystem Enabled
[ 0.267985] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.267990] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.267999] pci 0000:00:1c.0: MEM window: 0x93400000-0x943fffff
[ 0.268012] pci 0000:00:1c.0: PREFETCH window: 0x00000090400000-0x000000913fffff
[ 0.268022] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.268028] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.268036] pci 0000:00:1c.1: MEM window: 0x92400000-0x933fffff
[ 0.268042] pci 0000:00:1c.1: PREFETCH window: 0x00000091400000-0x000000923fffff
[ 0.268051] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.268054] pci 0000:00:1e.0: IO window: disabled
[ 0.268062] pci 0000:00:1e.0: MEM window: disabled
[ 0.268067] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.268084] alloc irq_desc for 16 on node -1
[ 0.268087] alloc kstat_irqs on node -1
[ 0.268095] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.268103] pci 0000:00:1c.0: setting latency timer to 64
[ 0.268113] alloc irq_desc for 17 on node -1
[ 0.268116] alloc kstat_irqs on node -1
[ 0.268121] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.268127] pci 0000:00:1c.1: setting latency timer to 64
[ 0.268136] pci 0000:00:1e.0: setting latency timer to 64
[ 0.268143] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.268147] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.268151] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.268155] pci_bus 0000:01: resource 1 mem: [0x93400000-0x943fffff]
[ 0.268160] pci_bus 0000:01: resource 2 pref mem [0x90400000-0x913fffff]
[ 0.268164] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.268167] pci_bus 0000:02: resource 1 mem: [0x92400000-0x933fffff]
[ 0.268171] pci_bus 0000:02: resource 2 pref mem [0x91400000-0x923fffff]
[ 0.268176] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.268179] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.268225] NET: Registered protocol family 2
[ 0.268352] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.268759] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.269362] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.269706] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.269710] TCP reno registered
[ 0.269850] NET: Registered protocol family 1
[ 0.269933] Trying to unpack rootfs image as initramfs...
[ 0.504070] Switched to high resolution mode on CPU 0
[ 0.575191] Freeing initrd memory: 7462k freed
[ 0.579269] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.579274] Simple Boot Flag at 0x44 set to 0x1
[ 0.579438] cpufreq-nforce2: No nForce2 chipset.
[ 0.579476] Scanning for low memory corruption every 60 seconds
[ 0.579617] audit: initializing netlink socket (disabled)
[ 0.579638] type=2000 audit(1257354851.576:1): initialized
[ 0.593792] highmem bounce pool size: 64 pages
[ 0.593800] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.595815] VFS: Disk quotas dquot_6.5.2
[ 0.595893] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.596694] fuse init (API version 7.12)
[ 0.596813] msgmni has been set to 1707
[ 0.597057] alg: No test for stdrng (krng)
[ 0.597073] io scheduler noop registered
[ 0.597076] io scheduler anticipatory registered
[ 0.597079] io scheduler deadline registered
[ 0.597142] io scheduler cfq registered (default)
[ 0.597157] pci 0000:00:02.0: Boot video device
[ 2.196012] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.796012] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.796290] alloc irq_desc for 24 on node -1
[ 3.796294] alloc kstat_irqs on node -1
[ 3.796308] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.796322] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.796511] alloc irq_desc for 25 on node -1
[ 3.796514] alloc kstat_irqs on node -1
[ 3.796526] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 3.796539] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.796668] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.796845] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.801187] ACPI: AC Adapter [ADP1] (on-line)
[ 3.801275] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.801280] ACPI: Power Button [PWRF]
[ 3.801347] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.803295] ACPI: Lid Switch [LID0]
[ 3.803361] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.803370] ACPI: Sleep Button [SLPB]
[ 3.804879] Monitor-Mwait will be used to enter C-1 state
[ 3.804913] Monitor-Mwait will be used to enter C-2 state
[ 3.804924] Marking TSC unstable due to TSC halts in idle
[ 3.804943] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 3.804975] processor LNXCPU:00: registered as cooling_device0
[ 3.836583] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.836595] ACPI: Thermal Zone [TZS0] (37 C)
[ 3.846687] thermal LNXTHERM:02: registered as thermal_zone1
[ 3.846698] ACPI: Thermal Zone [TZS1] (37 C)
[ 3.846764] isapnp: Scanning for PnP cards...
[ 3.852430] ACPI: Battery Slot [BAT0] (battery absent)
[ 4.200971] isapnp: No Plug & Play device found
[ 4.202642] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.204426] brd: module loaded
[ 4.205025] loop: module loaded
[ 4.205125] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 4.205220] ahci 0000:00:1f.2: version 3.0
[ 4.205238] alloc irq_desc for 19 on node -1
[ 4.205241] alloc kstat_irqs on node -1
[ 4.205251] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.205291] alloc irq_desc for 26 on node -1
[ 4.205294] alloc kstat_irqs on node -1
[ 4.205306] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 4.205361] ahci: SSS flag set, parallel bus scan disabled
[ 4.205409] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.205414] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems
[ 4.205422] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.228089] scsi0 : ahci
[ 4.228219] scsi1 : ahci
[ 4.228287] scsi2 : ahci
[ 4.228357] scsi3 : ahci
[ 4.228435] scsi4 : ahci
[ 4.228504] scsi5 : ahci
[ 4.228872] ata1: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405100 irq 26
[ 4.228878] ata2: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405180 irq 26
[ 4.228881] ata3: DUMMY
[ 4.228884] ata4: DUMMY
[ 4.228888] ata5: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405300 irq 26
[ 4.228893] ata6: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405380 irq 26
[ 4.230022] Fixed MDIO Bus: probed
[ 4.230070] PPP generic driver version 2.4.2
[ 4.230202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.230230] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.230251] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.230256] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.230323] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.234256] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.234265] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.234409] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94405c00
[ 4.248020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.248115] usb usb1: configuration #1 chosen from 1 choice
[ 4.248155] hub 1-0:1.0: USB hub found
[ 4.248165] hub 1-0:1.0: 4 ports detected
[ 4.248233] alloc irq_desc for 23 on node -1
[ 4.248237] alloc kstat_irqs on node -1
[ 4.248244] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.248258] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.248263] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.248304] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.252232] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.252241] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.252258] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94405800
[ 4.268021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.268119] usb usb2: configuration #1 chosen from 1 choice
[ 4.268157] hub 2-0:1.0: USB hub found
[ 4.268166] hub 2-0:1.0: 8 ports detected
[ 4.268246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.268270] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.268306] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.268316] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.268321] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.268364] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.268406] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[ 4.268508] usb usb3: configuration #1 chosen from 1 choice
[ 4.268543] hub 3-0:1.0: USB hub found
[ 4.268552] hub 3-0:1.0: 2 ports detected
[ 4.268613] alloc irq_desc for 21 on node -1
[ 4.268616] alloc kstat_irqs on node -1
[ 4.268623] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.268632] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.268636] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.268675] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.268714] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 4.268814] usb usb4: configuration #1 chosen from 1 choice
[ 4.268851] hub 4-0:1.0: USB hub found
[ 4.268860] hub 4-0:1.0: 2 ports detected
[ 4.268923] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.268932] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.268937] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.268982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.269014] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[ 4.269117] usb usb5: configuration #1 chosen from 1 choice
[ 4.269158] hub 5-0:1.0: USB hub found
[ 4.269166] hub 5-0:1.0: 2 ports detected
[ 4.269222] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.269231] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.269236] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.269274] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.269305] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 4.269405] usb usb6: configuration #1 chosen from 1 choice
[ 4.269446] hub 6-0:1.0: USB hub found
[ 4.269455] hub 6-0:1.0: 2 ports detected
[ 4.269514] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 4.269523] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.269527] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.269568] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.269600] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[ 4.269702] usb usb7: configuration #1 chosen from 1 choice
[ 4.269739] hub 7-0:1.0: USB hub found
[ 4.269751] hub 7-0:1.0: 2 ports detected
[ 4.269807] alloc irq_desc for 18 on node -1
[ 4.269810] alloc kstat_irqs on node -1
[ 4.269817] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.269827] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.269832] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.269872] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 4.269912] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[ 4.270018] usb usb8: configuration #1 chosen from 1 choice
[ 4.270054] hub 8-0:1.0: USB hub found
[ 4.270062] hub 8-0:1.0: 2 ports detected
[ 4.270188] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.284571] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.291660] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.291668] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.291672] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.291676] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.291680] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.291755] mice: PS/2 mouse device common for all mice
[ 4.291894] rtc_cmos 00:03: RTC can wake from S4
[ 4.291943] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.291977] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.292171] device-mapper: uevent: version 1.0.3
[ 4.292298] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.292359] device-mapper: multipath: version 1.1.0 loaded
[ 4.292363] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.292512] EISA: Probing bus 0 at eisa.0
[ 4.292523] Cannot allocate resource for EISA slot 2
[ 4.292526] Cannot allocate resource for EISA slot 3
[ 4.292529] Cannot allocate resource for EISA slot 4
[ 4.292551] EISA: Detected 0 cards.
[ 4.292644] cpuidle: using governor ladder
[ 4.292706] cpuidle: using governor menu
[ 4.293342] TCP cubic registered
[ 4.293560] NET: Registered protocol family 10
[ 4.294131] lo: Disabled Privacy Extensions
[ 4.294533] NET: Registered protocol family 17
[ 4.294556] Bluetooth: L2CAP ver 2.13
[ 4.294559] Bluetooth: L2CAP socket layer initialized
[ 4.294563] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.294565] Bluetooth: SCO socket layer initialized
[ 4.294600] Bluetooth: RFCOMM TTY layer initialized
[ 4.294604] Bluetooth: RFCOMM socket layer initialized
[ 4.294607] Bluetooth: RFCOMM ver 1.11
[ 4.294641] Using IPI No-Shortcut mode
[ 4.294728] PM: Resume from disk failed.
[ 4.294742] registered taskstats version 1
[ 4.294895] Magic number: 1:302:238
[ 4.294984] rtc_cmos 00:03: setting system clock to 2009-11-04 17:14:16 UTC (1257354856)
[ 4.294989] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.294991] EDD information not available.
[ 4.313645] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.568214] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.624029] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 5.017160] usb 2-5: configuration #1 chosen from 1 choice
[ 5.112105] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.113531] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 5.113677] ata2.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
[ 5.113682] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.115241] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 5.115418] ata2.00: configured for UDMA/133
[ 5.128176] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[ 5.128336] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.128390] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 5.128453] sd 1:0:0:0: [sda] Write Protect is off
[ 5.128457] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.128491] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.128656] sda: sda1 sda2 sda3
[ 5.156333] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.016033] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.019920] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 6.019928] ata5.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.00, max UDMA/33
[ 6.027862] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 6.027906] ata5.00: configured for UDMA/33
[ 6.051454] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.00 PQ: 0 ANSI: 5
[ 6.066416] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.066420] Uniform CD-ROM driver Revision: 3.20
[ 6.066525] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.066583] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.384036] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.400042] Freeing unused kernel memory: 540k freed
[ 6.400324] Write protecting the kernel text: 4568k
[ 6.400368] Write protecting the kernel read-only data: 1836k
[ 6.603295] Linux agpgart interface v0.103
[ 6.677605] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 6.678015] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 6.681088] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 6.836152] [drm] Initialized drm 1.1.0 20060810
[ 6.855730] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.855738] i915 0000:00:02.0: setting latency timer to 64
[ 6.858015] alloc irq_desc for 27 on node -1
[ 6.858020] alloc kstat_irqs on node -1
[ 6.858031] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 6.966283] [drm] i2c_init DPDDC-B
[ 6.977472] [drm] i2c_init DPDDC-D
[ 7.110277] i2c-adapter i2c-2: unable to read EDID block.
[ 7.110283] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 7.120292] [drm] fb0: inteldrmfb frame buffer device
[ 7.146693] acpi device:03: registered as cooling_device1
[ 7.147206] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[ 7.147260] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 7.147325] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.528682] [drm] LVDS-8: set mode 1366x768 14
[ 8.089152] Console: switching to colour frame buffer device 170x48
[ 8.541577] PM: Starting manual resume from disk
[ 8.541584] PM: Resume from partition 8:1
[ 8.541588] PM: Checking hibernation image.
[ 8.541709] PM: Resume from disk failed.
[ 8.553918] EXT4-fs (sda2): barriers enabled
[ 8.567122] kjournald2 starting: pid 382, dev sda2:8, commit interval 5 seconds
[ 8.567135] EXT4-fs (sda2): delayed allocation enabled
[ 8.567140] EXT4-fs: file extents enabled
[ 8.568516] EXT4-fs: mballoc enabled
[ 8.568534] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 9.115910] type=1505 audit(1257354861.317:2): operation="profile_load" pid=405 name=/usr/share/gdm/guest-session/Xsession
[ 9.119015] type=1505 audit(1257354861.321:3): operation="profile_load" pid=406 name=/sbin/dhclient3
[ 9.120252] type=1505 audit(1257354861.325:4): operation="profile_load" pid=406 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.120909] type=1505 audit(1257354861.325:5): operation="profile_load" pid=406 name=/usr/lib/connman/scripts/dhclient-script
[ 9.169721] type=1505 audit(1257354861.373:6): operation="profile_load" pid=407 name=/usr/bin/evince
[ 9.188396] type=1505 audit(1257354861.393:7): operation="profile_load" pid=407 name=/usr/bin/evince-previewer
[ 9.199444] type=1505 audit(1257354861.401:8): operation="profile_load" pid=407 name=/usr/bin/evince-thumbnailer
[ 9.223552] type=1505 audit(1257354861.425:9): operation="profile_load" pid=409 name=/usr/lib/cups/backend/cups-pdf
[ 9.224979] type=1505 audit(1257354861.429:10): operation="profile_load" pid=409 name=/usr/sbin/cupsd
[ 9.257425] type=1505 audit(1257354861.461:11): operation="profile_load" pid=410 name=/usr/sbin/ntpd
[ 9.902639] Adding 4104568k swap on /dev/sda1. Priority:-1 extents:1 across:4104568k
[ 10.276734] udev: starting version 147
[ 10.498714] EXT4-fs (sda2): internal journal on sda2:8
[ 11.090925] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.090940] atl1c 0000:01:00.0: setting latency timer to 64
[ 11.090986] atl1c 0000:01:00.0: PME# disabled
[ 11.090994] atl1c 0000:01:00.0: PME# disabled
[ 11.196970] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 11.237327] cfg80211: Calling CRDA to update world regulatory domain
[ 11.295165] Linux video capture interface: v2.00
[ 11.360256] lp: driver loaded but no devices found
[ 11.517518] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 11.534335] acer-wmi: Brightness must be controlled by generic video driver
[ 11.682804] uvcvideo: Found UVC 1.00 device CNF9113 (04f2:b160)
[ 11.693342] input: CNF9113 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6
[ 11.693405] usbcore: registered new interface driver uvcvideo
[ 11.693409] USB Video Class driver (v0.1.0)
[ 12.218456] EXT4-fs (sda3): barriers enabled
[ 12.218820] kjournald2 starting: pid 694, dev sda3:8, commit interval 5 seconds
[ 12.249395] EXT4-fs (sda3): internal journal on sda3:8
[ 12.249402] EXT4-fs (sda3): delayed allocation enabled
[ 12.249406] EXT4-fs: file extents enabled
[ 12.284986] EXT4-fs: mballoc enabled
[ 12.285009] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 12.286150] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 12.340058] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 12.428038] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 12.604169] usb 3-2: configuration #1 chosen from 1 choice
[ 12.823971] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.233436] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.233453] ath9k 0000:02:00.0: setting latency timer to 64
[ 13.668703] ath: EEPROM regdomain: 0x65
[ 13.668706] ath: EEPROM indicates we should expect a direct regpair map
[ 13.668711] ath: Country alpha2 being used: 00
[ 13.668714] ath: Regpair used: 0x65
[ 13.796031] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 13.796178] usbcore: registered new interface driver btusb
[ 13.962620] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 13.963529] Registered led device: ath9k-phy0::radio
[ 13.963556] Registered led device: ath9k-phy0::assoc
[ 13.963580] Registered led device: ath9k-phy0::tx
[ 13.963602] Registered led device: ath9k-phy0::rx
[ 13.963629] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf95c0000, irq=17
[ 14.458695] cfg80211: World regulatory domain updated:
[ 14.458702] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.458707] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.458711] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.458715] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.458719] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.458723] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.068100] alloc irq_desc for 22 on node -1
[ 15.068105] alloc kstat_irqs on node -1
[ 15.068114] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.068158] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.428961] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[ 15.429069] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 15.447461] __ratelimit: 3 callbacks suppressed
[ 15.447466] type=1505 audit(1257354867.649:13): operation="profile_replace" pid=828 name=/usr/share/gdm/guest-session/Xsession
[ 15.450690] type=1505 audit(1257354867.653:14): operation="profile_replace" pid=829 name=/sbin/dhclient3
[ 15.451895] type=1505 audit(1257354867.653:15): operation="profile_replace" pid=829 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 15.452599] type=1505 audit(1257354867.657:16): operation="profile_replace" pid=829 name=/usr/lib/connman/scripts/dhclient-script
[ 15.459452] type=1505 audit(1257354867.661:17): operation="profile_replace" pid=830 name=/usr/bin/evince
[ 15.490156] type=1505 audit(1257354867.693:18): operation="profile_replace" pid=830 name=/usr/bin/evince-previewer
[ 15.501671] type=1505 audit(1257354867.705:19): operation="profile_replace" pid=830 name=/usr/bin/evince-thumbnailer
[ 15.516942] type=1505 audit(1257354867.721:20): operation="profile_replace" pid=836 name=/usr/lib/cups/backend/cups-pdf
[ 15.518365] type=1505 audit(1257354867.721:21): operation="profile_replace" pid=836 name=/usr/sbin/cupsd
[ 15.616090] type=1505 audit(1257354867.821:22): operation="profile_replace" pid=840 name=/usr/sbin/ntpd
[ 21.959722] alloc irq_desc for 28 on node -1
[ 21.959728] alloc kstat_irqs on node -1
[ 21.959749] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 21.959876] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 22.175143] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.037620] ppdev: user-space parallel port driver
[ 25.299444] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.299449] Bluetooth: BNEP filters: protocol multicast
[ 25.568425] Bridge firewalling registered
[ 27.140562] i2c-adapter i2c-2: unable to read EDID block.
[ 27.140569] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 27.145001] i2c-adapter i2c-2: unable to read EDID block.
[ 27.145005] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 27.334145] i2c-adapter i2c-2: unable to read EDID block.
[ 27.334151] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 27.339458] i2c-adapter i2c-2: unable to read EDID block.
[ 27.339465] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 28.349500] __ratelimit: 3 callbacks suppressed
[ 28.349505] type=1503 audit(1257354880.553:24): operation="capable" pid=1302 parent=1 profile="/usr/sbin/ntpd" name="dac_override"
[ 32.776018] eth0: no IPv6 routers present
[ 37.459725] i2c-adapter i2c-2: unable to read EDID block.
[ 37.459733] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 37.464709] i2c-adapter i2c-2: unable to read EDID block.
[ 37.464714] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 37.611665] i2c-adapter i2c-2: unable to read EDID block.
[ 37.611671] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 37.616635] i2c-adapter i2c-2: unable to read EDID block.
[ 37.616640] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 37.775757] i2c-adapter i2c-2: unable to read EDID block.
[ 37.775764] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 37.780713] i2c-adapter i2c-2: unable to read EDID block.
[ 37.780717] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 54.331638] i2c-adapter i2c-2: unable to read EDID block.
[ 54.331644] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 54.336609] i2c-adapter i2c-2: unable to read EDID block.
[ 54.336614] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 54.487656] i2c-adapter i2c-2: unable to read EDID block.
[ 54.487662] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 54.492613] i2c-adapter i2c-2: unable to read EDID block.
[ 54.492617] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 54.639737] i2c-adapter i2c-2: unable to read EDID block.
[ 54.639743] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 54.644696] i2c-adapter i2c-2: unable to read EDID block.
[ 54.644701] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 56.744072] i2c-adapter i2c-2: unable to read EDID block.
[ 56.744078] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 56.748508] i2c-adapter i2c-2: unable to read EDID block.
[ 56.748512] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 62.313398] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 62.316220] wlan0 direct probe responded
[ 62.316226] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 62.318269] wlan0: authenticated
[ 62.318276] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 62.328154] wlan0: RX AssocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=2)
[ 62.328159] wlan0: associated
[ 62.328670] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 63.445035] padlock: VIA PadLock not detected.
[ 72.876024] wlan0: no IPv6 routers present
[ 79.677326] wlan0: disassociating by local choice (reason=3)
[ 431.072757] ata5: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[ 431.072763] ata5: irq_stat 0x40000001
[ 462.000182] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 462.000198] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 462.000200] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 462.000202] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 462.000206] ata5.00: status: { DRDY }
[ 462.000213] ata5: hard resetting link
[ 467.864035] ata5: failed to reset engine (errno=-5)
[ 470.647411] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 470.758159] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 470.758165] ata5.00: revalidation failed (errno=-5)
[ 475.644050] ata5: hard resetting link
[ 477.092046] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 482.092035] ata5.00: qc timeout (cmd 0xa1)
[ 482.092048] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 482.092052] ata5.00: revalidation failed (errno=-5)
[ 482.092060] ata5: limiting SATA link speed to 1.5 Gbps
[ 482.092066] ata5: hard resetting link
[ 488.756026] ata5: link is slow to respond, please be patient (ready=0)
[ 490.548041] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 490.550958] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 490.554696] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 490.554741] ata5.00: configured for UDMA/33
[ 490.555013] ata5: EH complete
[ 491.648092] ata5: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[ 491.648099] ata5: irq_stat 0x40000001

If I search for a word "error" or "failed" there are some errors and fails but I don't understand them quite... Any ideas why this is happening?

spetey
November 5th, 2009, 06:10 AM
I'm having a similar problem; Ubuntu 9.10 won't recognize my CDROM drive at all. The CD ripper Grip is gone suddenly in 9.10, though it used to work fine in 9.04, and Sound Juicer says I don't have any CDROM drives. What gives?! Thanks in advance ...

saechen
November 7th, 2009, 06:14 AM
Bump. Simular problems with 9.10 and Compaq 6510b.

frojnd
November 7th, 2009, 08:03 PM
I found this http://ubuntuforums.org/showpost.php?p=7759469&postcount=3 BUT this only fix the eject way. Now it would eject immediately but the cd drive still won't recognize any cds dvds!!! Any ideas?

brundles
November 7th, 2009, 09:47 PM
Similar one here - 9.10 doesn't recognise the DVD drive at all:

mark@E8200:~/Downloads$ sudo mount /media/cdrom
mount: special device /dev/scd0 does not exist

Trawling through lshw, lsmod etc all show the same thing - as far as Ubuntu is concerned, the DVD drive doesn't exit :(.

The drive is a Pioneer installed a couple of years back so nothing new or fancy.

Any suggestions appreciated!

frojnd
November 19th, 2009, 06:11 PM
For all of those ethat hadn't find a solution.... hiemanshu from freenode.org suggested me to change AHCI mode to IDE since I have sata drives... and look at this now cd/DVD rom works :)

Lrpbpb
March 29th, 2010, 10:12 PM
For all of those ethat hadn't find a solution.... hiemanshu from freenode.org suggested me to change AHCI mode to IDE since I have sata drives... and look at this now cd/DVD rom works :)

How exactly do you do that??

frojnd
May 13th, 2010, 09:54 AM
As I said in BIOS under (I don't remember what settings) I've changed AHCI mode into IDE mode.

If you don't know how to get into bios: When you power on Acer, you press F12 or Delete and you come into BIOS. Then you search for the AHCI mode under settings (don't know which ones since I don't have this computer with me) and when you find it you change it into IDE mode.