Pear PC won't boot my image!

[masterchief1995]

I have tried and tried again to get ppc to work on my linux box but I just can't!:( I've looked through so many tutorials.

I compiled ppc and it works but my HD image that I downloaded from the pear pc websitewon't boot

here is my config file

## PearPC Configuration File

##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
## so this would be used only for starting up)
##
## format: "(width)x(height)x(depth)"
## or "(width)x(height)x(depth)@(frequency)"
##
## depth can only be 15 or 32
##
## default: "800x600x15"
##

ppc_start_resolution = "800x600x15"

##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws (and so run faster)
## but feel less responsive. You should adjust this to your computer speed and personal
## preference.
##

redraw_interval_msec = 40

##
## Key codes
##

key_toggle_mouse_grab = "F12"

key_toggle_full_screen = "Alt+Return"


##
## Loader
##

##
## Boot method
## this can be
## 1. "auto", prom will boot the first bootable partition found (default)
## 2. "select", prom will show you a list of bootable partitions
## 3. "force", prom will load and boot the local file prom_loadfile
##

prom_bootmethod = "select"

## Example of how to use "force":

#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"

##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup
##

#prom_env_bootargs = ""
prom_env_machargs = "-v"

##
## This is needed if you want to boot Mac OS X
## (disabled by Debian maintainer while we don't ship video.x)
##
#prom_driver_graphic = "video.x"

## This will adjust the position of the initial page table (don't change)

#page_table_pa = 104857600

##
## CPU Config
##
## Processor Version Register
## Defaults to 0x00088302
## Only change if you know want you are doing
##

#cpu_pvr = 0x00088302


##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##

#memory_size=0x8000000

##
## IO Devices
##

##
## PCI IDE Config
##
## Drive type will be set according to file extension:
## .img: Harddisk (filesize must be multiple of 516096)
## .iso: CD-Rom
## Or you can override this by specifying the type via
## pci_ide0_master_type / pci_ide0_slave_type

pci_ide0_master_installed = 1
pci_ide0_master_image = "/home/paul/Public/pearpc-6gib.img"
pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 1
pci_ide0_slave_image = "/home/paul/Public/macosx.iso"
pci_ide0_slave_type = "cdrom"

##
## Network
##
## Choose one of the cards

pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"

pci_rtl8139_installed = 0
pci_rtl8139_mac = "de:ad:ca:fe:12:35"

##
## USB
##
pci_usb_installed = 1

##
## NVRAM
##
nvram_file = "nvram"

any help is greatly apreciated!:D