LinuxTAd
September 5th, 2009, 03:02 AM
I have just upgraded and I am curious if the RandR 1.2 (reported as 1.1 in CCC) is actually working the way it should. I am also curious to see other peoples xorg.conf file, here is mine as it currently is:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "amdcccle-Monitor[1]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-1"
Device "amdcccle-Device[1]-1"
Monitor "amdcccle-Monitor[1]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
#################### Logitech G5 Mouse Buttons ###################
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto"
Option "Buttons" "7" # Tells X11 the number of buttons on the mouse
Option "ZAxisMapping" "4 5" # Tells X11 which buttons to use for scrolling, 4 is up, 5 is down
Option "ButtonMapping" "1 2 3 6 7 4 5"
EndSection
Section "Extensions"
Option "Composite" "1"
EndSection
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "amdcccle-Screen[1]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "UseFastTLS" "1"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "on"
Option "EnableRandR12" "true"
BusID "PCI:1:0:0"
# Option "DesktopSetup" "horizontal"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-1"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
Option "DontZap" "False"
EndSection
note: I have been playing with some of the settings and trying to see what works and what doesn't with both fgl_glxgears (Full screen 1280x1050 2000.00 FPS approx.) and glxgears (Full screen 1280x960 1000.00 FPS approx.).
with each change, I do
sudo aticonfig --input=/etc/X11/xorg.confthen I do
ctrl + alt + backspaceor reboot.
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "amdcccle-Monitor[1]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-1"
Device "amdcccle-Device[1]-1"
Monitor "amdcccle-Monitor[1]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
#################### Logitech G5 Mouse Buttons ###################
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto"
Option "Buttons" "7" # Tells X11 the number of buttons on the mouse
Option "ZAxisMapping" "4 5" # Tells X11 which buttons to use for scrolling, 4 is up, 5 is down
Option "ButtonMapping" "1 2 3 6 7 4 5"
EndSection
Section "Extensions"
Option "Composite" "1"
EndSection
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "amdcccle-Screen[1]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "UseFastTLS" "1"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "on"
Option "EnableRandR12" "true"
BusID "PCI:1:0:0"
# Option "DesktopSetup" "horizontal"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-1"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
Option "DontZap" "False"
EndSection
note: I have been playing with some of the settings and trying to see what works and what doesn't with both fgl_glxgears (Full screen 1280x1050 2000.00 FPS approx.) and glxgears (Full screen 1280x960 1000.00 FPS approx.).
with each change, I do
sudo aticonfig --input=/etc/X11/xorg.confthen I do
ctrl + alt + backspaceor reboot.