PDA

View Full Version : [ubuntu] Problem with Intel graphics



laplace/d
July 29th, 2009, 06:16 PM
This is the info of the controller:

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)

i get the aspect ratio right and the resulotion as well, but i cannot get 3d rendering:


federico@federico-laptop:~$ glxinfo
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual or fbconfig

Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
3 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
Fallo de segmentación (segfault in spanish)



federico@federico-laptop:~$ glxgears
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual


Here is my xorg.conf (with which i've been playing around with a LOT)


# xorg.conf (xorg X Window System server configuration file)



Section "Files"

EndSection



Section "Module"

Load "glx"
Load "dri"

EndSection



Section "InputDevice"

Identifier "Generic Keyboard"

Driver "kbd"

Option "CoreKeyboard"

Option "XkbRules" "xorg"

Option "XkbModel" "pc105"

Option "XkbLayout" "latam"

EndSection



Section "InputDevice"

Identifier "Configured Mouse"

Driver "mouse"

Option "CorePointer"

Option "Device" "/dev/input/mice"

Option "Protocol" "ImPS/2"

Option "Emulate3Buttons" "true"

EndSection



Section "Device"

Identifier "Intel"

Driver "i810"

Option "AddARGBGLXVisuals" "True"

Option "AllowGLXWithComposite" "True"
Option "XAANoOffscreenPixmaps"

EndSection



Section "Monitor"

Identifier "Monitor genérico"

VendorName "Generic"

ModelName "Flat Panel 1440x900"

HorizSync 31-80

VertRefresh 56-76

Modeline "1440x900@60" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync

EndSection



Section "Screen"

Identifier "Default Screen"

Device "Intel"

Monitor "Monitor genérico"

DefaultDepth 24

SubSection "Display"

Modes "1440x900@60"

EndSubSection

EndSection



Section "ServerLayout"

Identifier "Default Layout"

Screen "Default Screen"

InputDevice "Generic Keyboard"

InputDevice "Configured Mouse"

EndSection



Section "Extensions"

Option "Composite" "Enable"

EndSection

Section "DRI"
Mode 0666
EndSection

jward3010
July 29th, 2009, 07:38 PM
That particular card is what I have and this workaround should do it: http://ubuntuforums.org/showthread.php?t=1130582

It's down to the use of EXA graphics mode which isn't that efficient and by moving to UXA mode (a little unstable) you can remedy it, it's strange you can't enable compiz at all. If you could it would run like a pig.

asmoore82
July 29th, 2009, 07:53 PM
unless you are running a really old 'buntu,
you should be able to be up and running fully functional with no almost no xorg.conf

I'm on this hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)

and this is my entire xorg.conf:

$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

krlosjcc
July 30th, 2009, 01:50 AM
where or how do u know the driver for the info you get for this info:

"00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)"

or in general info like that

davethewave83
August 1st, 2009, 03:14 AM
where or how do u know the driver for the info you get for this info:

"00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)"

or in general info like that

I too require the driver and info on how to setup/install the driver for 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Subsystem: Trigem Computer Inc. Device 3189
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at e8000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel modules: intelfb

please. I installed ubuntu on my mom's PC she used to use Windows. It is a rather old machine as she cannot afford a new one yet. Everything works great except the drivers for video it seems

Thanks!

riceandlentils
August 17th, 2009, 11:15 AM
@asmoore But what resolution are you running at? I have exactly the same card and xorg setup but only running at 1280x800.