PDA

View Full Version : [ubuntu] Trouble with printer HP P1005



marsislav
July 8th, 2009, 08:42 PM
Hello! I have installed "Ubuntu" 9.04 and printer HP LaserJet P1005 with USB port. Installation of printer was normal, the OS download necessary PLUG-IN`s and take me back message "Printer installation successful" or something like that. But! When I trying to print some kind of documet or picture the OS show message "Printing..." , but in actuality the printer just do nothink... /no action/ - as though ....NO command send to printer. /Sorry for my horrible english/
That is the LOG file generated from "printingbuginfo" shell scrip downloaded from Ubuntu official WEB site.


ProblemType: printingbuginfo v2.0: printingbug+localusb (https://wiki.ubuntu.com/PrintingBugInfoScript)
CupsConfiguredDevices: device for HP_LaserJet_P1005: hp:/usb/HP_LaserJet_P1005?serial=BC15BL5
CupsConfiguredPPDs: HP_LaserJet_P1005: HP LaserJet p1005 hpijs, 3.9.2
Date: Sun Jul 5 11:48:14 2009
DesktopEnvironment: GNOME
DistroRelease: Ubuntu 9.04
EtcPapersize: letter
InstalledPrintingPackages:
ii cups-driver-gutenprint 5.2.3-0ubuntu5 printer drivers for CUPS
ii foo2zjs 20090217-0ubuntu4 Support for printing to ZjStream-based printers
ii foomatic-db 20090218-0ubuntu3 OpenPrinting printer support - database
ii foomatic-db-engine 4.0.0-0ubuntu6.1 OpenPrinting printer support - programs
ii foomatic-db-hpijs 20090218-0ubuntu3 OpenPrinting printer support - database for HPIJS driver
ii foomatic-filters 4.0.0-0ubuntu9 OpenPrinting printer support - filters
ii ghostscript 8.64.dfsg.1-0ubuntu8 The GPL Ghostscript PostScript/PDF interpreter
ii gs-esp 8.64.dfsg.1-0ubuntu8 Transitional package
ii hpijs 3.9.2-3ubuntu4 HP Linux Printing and Imaging - gs IJS driver (hpijs)
ii hplip 3.9.2-3ubuntu4 HP Linux Printing and Imaging System (HPLIP)
ii libgnomeprint2.2-0 2.18.6-1 The GNOME 2.2 print architecture - runtime files
ii min12xxw 0.0.9-1ubuntu2 Printer driver for KonicaMinolta PagePro 1[234]xxW
ii openprinting-ppds 20090218-0ubuntu3 OpenPrinting printer support - PostScript PPD files
ii pnm2ppa 1.12-16.2ubuntu1 PPM to PPA converter
ii pxljr 1.1-0ubuntu6 Driver for HP's Color LaserJet 35xx/36xx color laser printers
ii splix 2.0.0-0.1ubuntu3.1 Driver for Samsung's SPL2 (bw) and SPLc (color) laser printers
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8, LC_PAPER=en_US.UTF-8
Uname: Linux marsislav-desktop 2.6.28-13-generic #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 i686 GNU/Linux
UsbPrinterDevices:
UsbPrinterIEEE1284Id:
UsbPrinterKernelModules: usblp 20224 0
lsusb:
Bus 001 Device 007: ID 03f0:3d17 Hewlett-Packard
Bus 001 Device 005: ID 050d:705a Belkin Components F5D7050A Wireless Adapter
Bus 001 Device 003: ID 413c:0108 Dell Computer Corp.
Bus 001 Device 002: ID 1267:0103 Logic3 / SpectraVideo plc G-720 Keyboard
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub




Thank You ! /And sorry again for my english /
Marsislav

Imunalia
July 8th, 2009, 09:03 PM
I have the same printer and had a similar issue. The following are the steps I took

Open the printer controls
Delete the defaultly created printer
Create a new printer and follow its directions, it should tell you that you need the HP tools and then it will offer to fetch it for you.
Get the HP tools and follow its instructions. From here on it will continue to install without a hitch.
Turn the printer off then on wait for ubuntu to pick it up again and you should be good to go.

As a warning this printer is slow as a turtle as it spools. Some times it can take 4 or 5 minutes to start. You will just have to be patient. Check the printer status, if it says processing just wait.

Hope it helps

marsislav
July 9th, 2009, 12:20 AM
Thank You for the answer.
Printer status show me that message -

"/usr/lib/cups/filter/foomatic-rip failed"
I don`t know what to do...

marsislav
July 9th, 2009, 01:00 AM
Thank You, man :)
The problem was solved. The OS was detect the wrong driver .... Yes, that is strange but it is fact.
System ->Administration->Printing
Choose Properties on the specific printer and infront section "Make And Model: choose "Change" button. And after that just select manual the right printer. Restart the printer and... Voala! :)
It`s working ! :)

neon100
November 4th, 2009, 03:23 AM
Thank You for the answer.
Printer status show me that message -

"/usr/lib/cups/filter/foomatic-rip failed"
I don`t know what to do...

Same problem. Any suggested solution?