[Misterio] Ubuntu arranca cuando quiere tras instalar drivers ATI

[Lauburu]

Hola amigos.

Veréis, quería pediros ayuda porque el otro día realicé una instalación limpia de la última versión de Ubuntu, la 9.04 Jaunty Jackalope, y estoy teniendo unos problemas que ya tuve en su momento con la 8.10 y nunca conseguí resolver.

Tras instalar Ubuntu e iniciar por primera vez compruebo que todo funciona bien, excepto la aceleración gráfica 3D. Entonces me dirijo a la página web de ATI (tengo una Ati Radeon HD3850) y me descargo sus últimos drivers, los 9.4. Los instalo (con el comando sh) y una vez instalados ejecuto la linea "sudo aticonfig --initial -f". Mi xorg.conf queda de la siguiente manera:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 1280 1024
EndSubSection
EndSection

Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:5:0:0"
EndSection


Bien, parece que todo está correctamente instalado. Reinicio mi PC, entro a Ubuntu y... no arranca, se queda en pantalla negra sin dar ningún tipo de señal. No puedo entrar al modo consola, así que me toca reinciar con el botón. Reincio, vuelvo a entrar y... igual. Reinicio unas 4 o 5 veces más y... más de lo mismo. Sin embargo AQUI VIENE LO RARO. :O

Tras reiniciar tropecientas veces sin resultado, de repente reincio una vez más y... Ubuntu arranca correctamente!! Y no solo eso, sino que todo funciona correctamente!! Más contento que unas castañuelas activo los efectos de escritorio para ver el cubo y las ventanas gelatinosas. Todo funciona correctamente, fluidísimo. No me lo podía creer!! Sin embargo no duraría mucho, tras reiciciar el ordenador una vez más me encuentro con que Ubuntu no arranca y se queda en pantalla negra, igual que al principio. Sin embargo reiniciando unas 6 o 7 veces más (imaginaros la paciencia que tengo XD) finalmente vuelve arrancar, y de nuevo todo funciona bien, (aceleración 3D incluida) como si no hubiese pasado nada.

¿Vosotros le veis alguna explicación a esto? :-? No me explico como es posible que arranque unas veces bien y otras mal, si al arrancar se supone que siempre se realiza el mismo proceso. ¿Por qué unas veces si y otras no?

La única pista que tengo son estos dos logs que según me han dicho podrían ser útiles para solucionar mi problema:

/var/log/Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-15-server x86_64 Ubuntu
Current Operating System: Linux alejandro-desktop 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64
Build Date: 09 April 2009 02:11:54AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@crested.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 6 00:04:05 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@5:0:0) ATI Technologies Inc RV670PRO [Radeon HD 3850] rev 0, Mem @ 0xd0000000/268435456, 0xfe2e0000/65536, I/O @ 0x00006c00/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
Module class: X.Org Video Driver
(II) Primary Device is: PCI 05@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.60.3
(II) ATI Proprietary Linux Driver Release Identifier: 8.602
(II) ATI Proprietary Linux Driver Build Date: Apr 1 2009 15:01:03
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 5.0
(--) Chipset Supported AMD Graphics Processor (0x9505) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x225c0a0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(--) fglrx(0): Chipset: "ATI Radeon HD 3850" (Chipset = 0x9505)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x0234)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfe2e0000
(--) fglrx(0): I/O port at 0x00006c00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.68
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV670
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): Using adapter: 5:0.0.
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000001, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: 1f Serial#: 11507
(II) fglrx(0): Year: 2006 Week: 13
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.596
(II) fglrx(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #4: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) fglrx(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 355 x 265 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: AU0613011507
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 92 kHz, PixClock max 180 MHz
(II) fglrx(0): Monitor name: PH109B7
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c1f00f32c0000
(II) fglrx(0): 0d10010368241b782b0699a0574f9826
(II) fglrx(0): 10484ca5ef00315945596159714f8159
(II) fglrx(0): 8199a940a945ea240060410028303060
(II) fglrx(0): 130063091100001e000000ff00415530
(II) fglrx(0): 3631333031313530370a000000fd0032
(II) fglrx(0): a01e5c12000a202020202020000000fc
(II) fglrx(0): 00504831303942370a20202020200076
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using fuzzy aspect match for initial modes
(II) fglrx(0): Output CRT1 using initial mode 1280x960
(==) fglrx(0): DPI set to (96, 96)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000b
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 1527808 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 2299.
(II) fglrx(0): Finished Initialize PPLIB!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:5:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x1e000
(II) fglrx(0): [drm] mapped SAREA 0x1e000 to 0x7f058879a000
(II) fglrx(0): [drm] framebuffer handle = 0x1f000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.60.3
(II) fglrx(0): Date: Apr 1 2009
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.28-11-generic
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00020000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01018000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3296)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2272
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 355 x 265
swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "es"
(**) AT Translated Set 2 keyboard: xkb_layout: "es"
(II) config/hal: Adding input device G-Tech CHINA U+P Wireless Mouse
(**) G-Tech CHINA U+P Wireless Mouse: always reports core events
(**) G-Tech CHINA U+P Wireless Mouse: Device: "/dev/input/event4"
(II) G-Tech CHINA U+P Wireless Mouse: Found 5 mouse buttons
(II) G-Tech CHINA U+P Wireless Mouse: Found x and y relative axes
(II) G-Tech CHINA U+P Wireless Mouse: Configuring as mouse
(**) G-Tech CHINA U+P Wireless Mouse: YAxisMapping: buttons 4 and 5
(**) G-Tech CHINA U+P Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "G-Tech CHINA U+P Wireless Mouse" (type: MOUSE)
(**) G-Tech CHINA U+P Wireless Mouse: (accel) keeping acceleration scheme 1
(**) G-Tech CHINA U+P Wireless Mouse: (accel) filter chain progression: 2.00
(**) G-Tech CHINA U+P Wireless Mouse: (accel) filter stage 0: 20.00 ms
(**) G-Tech CHINA U+P Wireless Mouse: (accel) set acceleration profile 0
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using EDID range info for horizontal sync
(II) fglrx(0): Using EDID range info for vertical refresh
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) fglrx(0): EDID vendor "PHL", prod id 31
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)


[b]/var/log/Xorg.0.log.old (He tenido que renombrarlo a Xorg.0.log.old.txt para que me dejase abrirlo, sino no me dejaba.)

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-15-server x86_64 Ubuntu
Current Operating System: Linux alejandro-desktop 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64
Build Date: 09 April 2009 02:11:54AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@crested.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 6 00:03:45 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@5:0:0) ATI Technologies Inc RV670PRO [Radeon HD 3850] rev 0, Mem @ 0xd0000000/268435456, 0xfe2e0000/65536, I/O @ 0x00006c00/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
Module class: X.Org Video Driver
(II) Primary Device is: PCI 05@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.60.3
(II) ATI Proprietary Linux Driver Release Identifier: 8.602
(II) ATI Proprietary Linux Driver Build Date: Apr 1 2009 15:01:03
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 5.0
(--) Chipset Supported AMD Graphics Processor (0x9505) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x1cea0a0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(--) fglrx(0): Chipset: "ATI Radeon HD 3850" (Chipset = 0x9505)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x0234)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfe2e0000
(--) fglrx(0): I/O port at 0x00006c00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.68
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV670
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): Using adapter: 5:0.0.
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000001, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: 1f Serial#: 11507
(II) fglrx(0): Year: 2006 Week: 13
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.596
(II) fglrx(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #4: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) fglrx(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 355 x 265 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: AU0613011507
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 92 kHz, PixClock max 180 MHz
(II) fglrx(0): Monitor name: PH109B7
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c1f00f32c0000
(II) fglrx(0): 0d10010368241b782b0699a0574f9826
(II) fglrx(0): 10484ca5ef00315945596159714f8159
(II) fglrx(0): 8199a940a945ea240060410028303060
(II) fglrx(0): 130063091100001e000000ff00415530
(II) fglrx(0): 3631333031313530370a000000fd0032
(II) fglrx(0): a01e5c12000a202020202020000000fc
(II) fglrx(0): 00504831303942370a20202020200076
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 connected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using fuzzy aspect match for initial modes
(II) fglrx(0): Output CRT1 using initial mode 1280x960
(==) fglrx(0): DPI set to (96, 96)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000b
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 1527808 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 2299.
(II) fglrx(0): Finished Initialize PPLIB!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:5:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7fc85be3e000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.60.3
(II) fglrx(0): Date: Apr 1 2009
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.28-11-generic
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01018000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3296)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2272
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 355 x 265
(II) fglrx(0): Shutdown CMMQS
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x2000 at 0x7fc85be3e000
ddxSigGiveUp: Closing log

Muchísimas gracias por adelantado a todos los que me echen un cable, sobre todo después de semejante tocho que he escrito... Un saludo!! :)

[Lauburu]

Bueno, refloto un poco esto para decir que todavía espero vuestra ayuda con los brazos abiertos!!! jajaja

[Hei Ku]

Cuando te falla, podes tirar un lspci? Me entra la duda si siempre reconoce la placa en el mismo bus y id, por un par de errores que tira en el log.

[Lauburu]

Que va, cuando hay fallo la pantalla se queda en negro y el sistema se bloquea. No puedo entrar al modo consola con ALT+F2. Tambien he probado a hacer cosas como cambiar la resolución con Ctrl+"+" e imposible.

El otro día estuve echando un ojo a las opciones de la BIOS pero entiendo demasiado y tampoco vi nada llamativo que me incitase a cambiarlo...

[Hei Ku]

Probaste cambiar a consola con Ctrl+Alt+F1?

[Lauburu]

Si, y lo acabo de comprobar de nuevo, no se puede. :mad:

[Hei Ku]

No tendras problemas de hardware?
No debería colgarse por un problema de drivers de video.

[clasificado]

Que va, cuando hay fallo la pantalla se queda en negro y el sistema se bloquea. No puedo entrar al modo consola con ALT+F2. Tambien he probado a hacer cosas como cambiar la resolución con Ctrl+"+" e imposible.

El otro día estuve echando un ojo a las opciones de la BIOS pero entiendo demasiado y tampoco vi nada llamativo que me incitase a cambiarlo...

A mi me ha pasado hace un montón. Y aunque parecía que estaba absolutamente colgada, con OTRA pc le pegaba por ssh y respondia. Así me enteré que era el XOrg que se iba al demonio, y tras algo de trabajo llegué hasta el módulo propietario de nvidia, con incompatibilidades de la época (hace 2 años mas o menos)

clasificado

[Lauburu]

Pues problemas de hardware juraría que no. En windows no tengo problemas de ningún tipo, y suelo jugar a juegos que ponen la gráfica a tope. Jamás he tenido cuelgues ni cosas raras. En Linux también va todo muy bien, excepto la aceleración 3D. Bueno, la aceleración 3D no va mal cuando consigo arrancar, lo que pasa es que tras instalar los drivers de video casi nunca arranca. :confused:

Lo que pienso es que quizás haya algún otro componente peleándose con la gráfica tras instalar los drivers, no se, algún tipo de incompatibilidad como dice clasificado. Por eso estuve echando un ojo a la BIOS, a ver si podía modificar algo a más bajo nivel, pero no encontré nada de utilidad.

En fin, parece que esto es más complicado de lo que parece!! De todas formas muchas gracias por vuestra ayuda!! :)

[Hei Ku]

En los últimos días escuché de varios que se quejaban de los drivers nuevos de ATI. Ya deberían estar por salir los de este mes, así que esperemos y veamos qué pasa entonces.

No tenes otra maquina como para conectarte por ssh si se cuelga el video, no?

[Lauburu]

Tengo un portátil pero no tiene instalado Linux y su dueño, que es mi padre, no está por la labor... jajaja

De todas formas quizás pueda conseguir uno más adelante. ¿Qué tendría que hacer para conectarme por ssh?

Cuando salgan los drivers 9.5 probaré de nuevo, pero me temo que no darán resultado. Me lleva pasando esto desde que salió Intrepid Ibex, así que desde los drivers 8.10 hasta los de ahora no he obtenido solución gracias a los drivers... Lo mio tiene que ser un problema muy raro!! Y con rara solución seguramente!!

EDIT: Ahora que lo pienso... podría utilizar el portatil de mi padre con el Live CD de Ubuntu para acceder por ssh ¿no?

[Hei Ku]

Como instalaste los drivers? Los bajaste de ATI manualmente o son los del repositorio de Ubuntu?

Por ahora olvidate del ssh, porque habria q configurarle un server,etc, que es mas lio de lo que ayuda.

[Lauburu]

Los drivers que tengo ahora mismo son los de la web de ATI. (9.4) Los instalo con el comando sudo sh ./ati... , abro el fichero xorg.conf para asegurarme que tengo la linea Driver "fglrx" en la sección "Device" y ejecuto el comando sudo aticonfig --initial -f.

He probado a hacer lo mismo con los de los repositorios de Ubuntu, pero me hacen exactamente lo mismo (lo de arrancar muy pocas veces) pero además me dan un resultado mucho peor. Con ellos, cuando consigo arrancar, el sistema se me congela a la mínima, por ejemplo accediendo a la ventana de configuración de pantalla.

Y lo del ssh lo dejamos por el momento entonces.