PDA

View Full Version : [ubuntu] Epson V 200 scanner



MZ250Supa5
April 20th, 2009, 08:47 AM
I have tried to set this scanner up as per various threads on the forum, but for some reason I can't get the bloomin' thing to work!

I have the following output from Terminal after having followed Tanker Bob's instructions:

padi@padi-desktop:~$ sane-find-scanner

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8 [EPSON], product=0x012e [EPSON Scanner]) at libusb:005:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
padi@padi-desktop:~$ scanimage -L
device `v4l:/dev/video0' is a Noname USB 2.0 Camera virtual device
padi@padi-desktop:~$

Any help would be very much appreciated.

MontelEdwards
May 6th, 2009, 09:54 PM
I have tried to set this scanner up as per various threads on the forum, but for some reason I can't get the bloomin' thing to work!

I have the following output from Terminal after having followed Tanker Bob's instructions:

padi@padi-desktop:~$ sane-find-scanner

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8 [EPSON], product=0x012e [EPSON Scanner]) at libusb:005:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
padi@padi-desktop:~$ scanimage -L
device `v4l:/dev/video0' is a Noname USB 2.0 Camera virtual device
padi@padi-desktop:~$

Any help would be very much appreciated.
uh, this one got me.
*bump*