hyper_ch
March 22nd, 2009, 07:22 PM
HOWTO: Compile Amarok 2 from SVN
Introduction
Amarok is a pretty nifty and advance music player for the KDE desktop. However the current version in the *buntu 8.10 repos is hopelessly outdated and (IMHO) totally bugged. There's also the Amarok Neon Project, which aims at providing daily SVN builds for *buntu however lately they have not been updated. So, if you want to be up-to-date with latest Amarok development you either wait until the Neon Project provides binaries again or you compile it on your own. If you want to compile it on your own, you require KDE 4.2. There are also PPA repos for that, use my generator http://repogen.simplylinux.ch to get the according info.
The following howto will feature a few more things than are necessary. I like especially to add the medibuntu repos so that together with kubuntu-restricted-extras I have codecs for just about everyting. The package I install from medibuntu in this howto is the w32codecs (or w64codecs if you are on a 64bit OS).
I tested this howto on a vanilla Kubuntu 8.10 install. Depending on how you modified your system over time you will need to adjust a few things.
Thanks goes to markey and mamarok in the #amarok channel in irc.freenode.org. Also the groundwork for this howto are the following two pages:
http://amarok.kde.org/blog/archives/833-Installing-Amarok-2-from-SVN-in-your-home-directory.html
http://amarok.kde.org/wiki/Development/MySQL_Embedded
Step 1: Remove current amarok installation
JAUNTY USERS: Have a look at this post here: http://ubuntuforums.org/showpost.php?p=7052425&postcount=12
sudo apt-get purge amarok amarok-common amarok-engine-xine
Instead of "purge" you can also use "remove". The difference is that purge will delete config and user data files (e.g. your statistics and stuff) - you may want to make a backup first.
Step 2: Update your sources.list
You can use my repo generator: http://repogen.simplylinux.ch . It's important that you select the "main, restricted, universe, multiverse" branches, the "security, updates, proposed, backport" updates and the "KDE 4.2 PPA, Medibuntu" 3rd party repos. Medibuntu isn't required but it's recommended (although some people don't like it /me glances at HymnToLife).
That should generate a list like this:
################################################## ###########
################### OFFICIAL UBUNTU REPOS ###################
################################################## ###########
###### Ubuntu Main Repos
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid main restricted universe multiverse
###### Ubuntu Update Repos
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-security main restricted universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-updates main restricted universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-proposed main restricted universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-backports main restricted universe multiverse
###### Ubuntu Partner Repo
deb http://archive.canonical.com/ubuntu intrepid partner
################################################## ############
##################### UNOFFICIAL REPOS ######################
################################################## ############
###### 3rd Party Binary Repos
#### KDE 4.2 PPA Repos - http://www.kubuntu.org/news/kde-4.2
## Run this command: gpg --keyserver keyserver.ubuntu.com --recv-keys 493B3065 && gpg --export -a 493B3065 | sudo apt-key add -
deb http://ppa.launchpad.net/kubuntu-experimental/ubuntu intrepid main
#### Medibuntu - http://www.medibuntu.org/
## Run this command: sudo apt-get update && sudo apt-get install medibuntu-keyring && sudo apt-get update
deb http://packages.medibuntu.org/ intrepid free non-free
Replace your /etc/apt/sources.list with this list above (or your own) or add the missing parts to it.
Finally you just need to import that gpg keys to get rid of the error message that would appear otherwise:
gpg --keyserver keyserver.ubuntu.com --recv-keys 493B3065 && gpg --export -a 493B3065 | sudo apt-key add -
sudo apt-get update && sudo apt-get install medibuntu-keyring && sudo apt-get update
Step 3: Upgrade
After you added the KDE 4.2 repos you need to upgrade your system:
sudo apt-get dist-upgrade
And then remove the obsolete dependencies (not necessary but recommended):
sudo apt-get autoremove
Step 4: Reboot
Reboot your system:
sudo reboot
Step 5: Installe required packages
Now install the required packages. If you're on 64-bit then use the w64codecs package instead of the w32codecs one.:
sudo apt-get install kubuntu-restricted-extras w32codecs build-essential kde-devel subversion libmysqlclient15-dev libncurses5-dev libtag1-dev libstrigiqtdbusclient-dev
Step 6: Extend your .bashrc and myenv.sh
You need to extend your .bashrc and myenv.sh files with a few things. Just run those commands:
echo '' >> ${HOME}/.bashrc
echo 'export PATH=$HOME/kde/bin:$PATH' >> ${HOME}/.bashrc
mkdir -p ${HOME}/.kde/env
touch ${HOME}/.kde/env/myenv.sh
echo '' >> ${HOME}/.kde/env/myenv.sh
echo 'export KDEDIR=$HOME/kde' >> ${HOME}/.kde/env/myenv.sh
echo 'export KDEDIRS=$KDEDIR' >> ${HOME}/.kde/env/myenv.sh
Non-KDE users need to run this code instead:
echo '' >> ${HOME}/.bashrc
echo 'export PATH=$HOME/kde/bin:$PATH' >> ${HOME}/.bashrc
echo 'export KDEDIR=$HOME/kde' >> ${HOME}/.bashrc
echo 'export KDEDIRS=$KDEDIR' >> ${HOME}/.bashrc
And verify whether those were really added:
cat ${HOME}/.bashrc
cat ${HOME}/.kde/env/myenv.sh
Non-KDE users just run the first command.
Step 7: Reload your .bashrc
Reload your .bashrc:
source ${HOME}/.bashrc
Step 8: Created required folders
Create the required folders:
mkdir -p ${HOME}/kde/src
mkdir -p ${HOME}/kde/build/amarok
Step 9: Download amarok and taglib-extras by svn
Download Amarok and libtag-extras by issuing these commands:
cd ${HOME}/kde/src
svn co svn://anonsvn.kde.org/home/kde/trunk/extragear/multimedia/amarok amarok
svn co svn://anonsvn.kde.org/home/kde/trunk/kdesupport/taglib-extras/ taglib-extras
At the time I did this I checked out revision 942886.
Step 10: Download MySQL
MySQL is now integrated in Amarok 2 directly, this means we require the source for it. You can download MySQL here http://dev.mysql.com/downloads/mysql/5.1.html#source (select the tar.gz version). The current version is 5.1.32 and for the next commands to be correct you need to change the version number accordingly if you use a newer one. If you opt to manually download MySQL then download it to: ${HOME}/kde/src
Or you can just follow those commands below to get the MySQL source into the proper place:
cd ${HOME}/kde/src
wget http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-5.1.32.tar.gz/from/http://mirror.switch.ch/ftp/mirror/mysql/
Step 11: Extract and compile MySQL
As said before, if you use a different version, you need to alter the version number in the following steps:
tar xzvf mysql-5.1.32.tar.gz
cd mysql-5.1.32
cp -R ${HOME}/kde/src/amarok/supplementary_scripts/mysqle/* .
In case you got a multicore cpu or more cpus then you can change the number of cores to be used to compile. If you have a dual core then set the option below to "-j3". If you have a quadcore set it to "-j5". In rare cases there are problems by using multicore; if that's the case then just set it to "-j1":
export MAKEOPTS=-j2
Now you can compile MySQL:
./build-mysqle.sh --prefix=${HOME}/usr
Step 12: compile taglib-extras
This has lately been moved out of the amarok svn and needs to be compiled on its own. Run the following steps:
cd ${HOME}/kde/src/taglib-extras/
mkdir build
cd build
export LD_LIBRARY_PATH=${HOME}/kde/build/taglib-extras/taglib-extras
cmake -DCMAKE_INSTALL_PREFIX=${HOME}/kde ..
make
make install
Step 13: Compile QtScriptGenerator
This is another part that was recently moved out of the amarok svn and there are still a few issues with it. Just run the code below or download newer versions at http://code.google.com/p/qtscriptgenerator/downloads/list :
cd ${HOME}/kde/src
wget http://qtscriptgenerator.googlecode.com/files/qtscriptgenerator-src-0.1.0.tar.gz
tar xfvz qtscriptgenerator-src-0.1.0.tar.gz
cd qtscriptgenerator-src-0.1.0
The current version 0.1.0 has a few issues with *buntu. Because of that you need to patch it by running the following from the qtscriptgenerator-0.1.0 directory:
nano include_everything.patch
And add this code to it:
--- b/generator/qtscript_masterinclude.h 2009-03-21 20:37:30.719523909 -0400
+++ a/generator/qtscript_masterinclude.h 2009-03-21 21:00:25.108149339 -0400
@@ -31,17 +31,41 @@
#include <QtUiTools/QtUiTools>
-#ifndef QT_NO_XMLPATTERNS
-# include <QtXmlPatterns/QtXmlPatterns>
-#endif
-
-#ifndef QT_NO_WEBKIT
-# include <QtWebKit/QtWebKit>
-#endif
-
-#ifndef QT_NO_PHONON
-# include <phonon/phonon>
-#endif
+#include <QtXmlPatterns/QtXmlPatterns>
+
+#include <QtWebKit/QtWebKit>
+
+#include "phonon/abstractaudiooutput.h"
+#include "phonon/abstractmediastream.h"
+#include "phonon/abstractvideooutput.h"
+#include "phonon/addoninterface.h"
+#include "phonon/audiooutput.h"
+#include "phonon/audiooutputinterface.h"
+#include "phonon/backendcapabilities.h"
+#include "phonon/backendinterface.h"
+#include "phonon/effect.h"
+#include "phonon/effectinterface.h"
+#include "phonon/effectparameter.h"
+#include "phonon/effectwidget.h"
+#include "phonon/mediacontroller.h"
+#include "phonon/medianode.h"
+#include "phonon/mediaobject.h"
+#include "phonon/mediaobjectinterface.h"
+#include "phonon/mediasource.h"
+#include "phonon/objectdescription.h"
+#include "phonon/objectdescriptionmodel.h"
+#include "phonon/path.h"
+#include "phonon/phonondefs.h"
+#include "phonon/phononnamespace.h"
+#include "phonon/platformplugin.h"
+#include "phonon/seekslider.h"
+#include "phonon/streaminterface.h"
+#include "phonon/videoplayer.h"
+#include "phonon/videowidget.h"
+#include "phonon/videowidgetinterface.h"
+#include "phonon/volumefadereffect.h"
+#include "phonon/volumefaderinterface.h"
+#include "phonon/volumeslider.h"
#include "../qtbindings/qtscript_core/qtscriptconcurrent.h"
Now run the following command to patch the source:
patch -p1 < include_everything.patch
Once you've done that, you can compile qtscriptgenerator and the plugings by running the following:
export INCLUDE=/usr/include/qt4
cd generator
qmake
make
./generator
cd ../qtbindings
qmake
make
Once you're done you'll need to copy the plugins to /usr/lib/qt4/plugins/script:
cd ../plugins/script
sudo cp -R * /usr/lib/qt4/plugins/script/
Step 14: Compile Amarok 2
Finally we've reached the point where we can compile Amarok 2:
cd ${HOME}/kde/src/amarok
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${HOME}/kde -DCMAKE_BUILD_TYPE=debugfull ${HOME}/kde/src/amarok
make
make install
After the cmake you will get a few warnings but compiling and installation should go without errors.
Step 15: Update KDE config
Now you need to update the KDE config:
kbuildsycoca4 --noincremental
Step 16: Run Amarok 2
Finally you can run Amarok 2 by issuing the following command in the terminal. I have yet to find a way to start it from the menu.:
amarok
Introduction
Amarok is a pretty nifty and advance music player for the KDE desktop. However the current version in the *buntu 8.10 repos is hopelessly outdated and (IMHO) totally bugged. There's also the Amarok Neon Project, which aims at providing daily SVN builds for *buntu however lately they have not been updated. So, if you want to be up-to-date with latest Amarok development you either wait until the Neon Project provides binaries again or you compile it on your own. If you want to compile it on your own, you require KDE 4.2. There are also PPA repos for that, use my generator http://repogen.simplylinux.ch to get the according info.
The following howto will feature a few more things than are necessary. I like especially to add the medibuntu repos so that together with kubuntu-restricted-extras I have codecs for just about everyting. The package I install from medibuntu in this howto is the w32codecs (or w64codecs if you are on a 64bit OS).
I tested this howto on a vanilla Kubuntu 8.10 install. Depending on how you modified your system over time you will need to adjust a few things.
Thanks goes to markey and mamarok in the #amarok channel in irc.freenode.org. Also the groundwork for this howto are the following two pages:
http://amarok.kde.org/blog/archives/833-Installing-Amarok-2-from-SVN-in-your-home-directory.html
http://amarok.kde.org/wiki/Development/MySQL_Embedded
Step 1: Remove current amarok installation
JAUNTY USERS: Have a look at this post here: http://ubuntuforums.org/showpost.php?p=7052425&postcount=12
sudo apt-get purge amarok amarok-common amarok-engine-xine
Instead of "purge" you can also use "remove". The difference is that purge will delete config and user data files (e.g. your statistics and stuff) - you may want to make a backup first.
Step 2: Update your sources.list
You can use my repo generator: http://repogen.simplylinux.ch . It's important that you select the "main, restricted, universe, multiverse" branches, the "security, updates, proposed, backport" updates and the "KDE 4.2 PPA, Medibuntu" 3rd party repos. Medibuntu isn't required but it's recommended (although some people don't like it /me glances at HymnToLife).
That should generate a list like this:
################################################## ###########
################### OFFICIAL UBUNTU REPOS ###################
################################################## ###########
###### Ubuntu Main Repos
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid main restricted universe multiverse
###### Ubuntu Update Repos
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-security main restricted universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-updates main restricted universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-proposed main restricted universe multiverse
deb http://ch.archive.ubuntu.com/ubuntu/ intrepid-backports main restricted universe multiverse
###### Ubuntu Partner Repo
deb http://archive.canonical.com/ubuntu intrepid partner
################################################## ############
##################### UNOFFICIAL REPOS ######################
################################################## ############
###### 3rd Party Binary Repos
#### KDE 4.2 PPA Repos - http://www.kubuntu.org/news/kde-4.2
## Run this command: gpg --keyserver keyserver.ubuntu.com --recv-keys 493B3065 && gpg --export -a 493B3065 | sudo apt-key add -
deb http://ppa.launchpad.net/kubuntu-experimental/ubuntu intrepid main
#### Medibuntu - http://www.medibuntu.org/
## Run this command: sudo apt-get update && sudo apt-get install medibuntu-keyring && sudo apt-get update
deb http://packages.medibuntu.org/ intrepid free non-free
Replace your /etc/apt/sources.list with this list above (or your own) or add the missing parts to it.
Finally you just need to import that gpg keys to get rid of the error message that would appear otherwise:
gpg --keyserver keyserver.ubuntu.com --recv-keys 493B3065 && gpg --export -a 493B3065 | sudo apt-key add -
sudo apt-get update && sudo apt-get install medibuntu-keyring && sudo apt-get update
Step 3: Upgrade
After you added the KDE 4.2 repos you need to upgrade your system:
sudo apt-get dist-upgrade
And then remove the obsolete dependencies (not necessary but recommended):
sudo apt-get autoremove
Step 4: Reboot
Reboot your system:
sudo reboot
Step 5: Installe required packages
Now install the required packages. If you're on 64-bit then use the w64codecs package instead of the w32codecs one.:
sudo apt-get install kubuntu-restricted-extras w32codecs build-essential kde-devel subversion libmysqlclient15-dev libncurses5-dev libtag1-dev libstrigiqtdbusclient-dev
Step 6: Extend your .bashrc and myenv.sh
You need to extend your .bashrc and myenv.sh files with a few things. Just run those commands:
echo '' >> ${HOME}/.bashrc
echo 'export PATH=$HOME/kde/bin:$PATH' >> ${HOME}/.bashrc
mkdir -p ${HOME}/.kde/env
touch ${HOME}/.kde/env/myenv.sh
echo '' >> ${HOME}/.kde/env/myenv.sh
echo 'export KDEDIR=$HOME/kde' >> ${HOME}/.kde/env/myenv.sh
echo 'export KDEDIRS=$KDEDIR' >> ${HOME}/.kde/env/myenv.sh
Non-KDE users need to run this code instead:
echo '' >> ${HOME}/.bashrc
echo 'export PATH=$HOME/kde/bin:$PATH' >> ${HOME}/.bashrc
echo 'export KDEDIR=$HOME/kde' >> ${HOME}/.bashrc
echo 'export KDEDIRS=$KDEDIR' >> ${HOME}/.bashrc
And verify whether those were really added:
cat ${HOME}/.bashrc
cat ${HOME}/.kde/env/myenv.sh
Non-KDE users just run the first command.
Step 7: Reload your .bashrc
Reload your .bashrc:
source ${HOME}/.bashrc
Step 8: Created required folders
Create the required folders:
mkdir -p ${HOME}/kde/src
mkdir -p ${HOME}/kde/build/amarok
Step 9: Download amarok and taglib-extras by svn
Download Amarok and libtag-extras by issuing these commands:
cd ${HOME}/kde/src
svn co svn://anonsvn.kde.org/home/kde/trunk/extragear/multimedia/amarok amarok
svn co svn://anonsvn.kde.org/home/kde/trunk/kdesupport/taglib-extras/ taglib-extras
At the time I did this I checked out revision 942886.
Step 10: Download MySQL
MySQL is now integrated in Amarok 2 directly, this means we require the source for it. You can download MySQL here http://dev.mysql.com/downloads/mysql/5.1.html#source (select the tar.gz version). The current version is 5.1.32 and for the next commands to be correct you need to change the version number accordingly if you use a newer one. If you opt to manually download MySQL then download it to: ${HOME}/kde/src
Or you can just follow those commands below to get the MySQL source into the proper place:
cd ${HOME}/kde/src
wget http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-5.1.32.tar.gz/from/http://mirror.switch.ch/ftp/mirror/mysql/
Step 11: Extract and compile MySQL
As said before, if you use a different version, you need to alter the version number in the following steps:
tar xzvf mysql-5.1.32.tar.gz
cd mysql-5.1.32
cp -R ${HOME}/kde/src/amarok/supplementary_scripts/mysqle/* .
In case you got a multicore cpu or more cpus then you can change the number of cores to be used to compile. If you have a dual core then set the option below to "-j3". If you have a quadcore set it to "-j5". In rare cases there are problems by using multicore; if that's the case then just set it to "-j1":
export MAKEOPTS=-j2
Now you can compile MySQL:
./build-mysqle.sh --prefix=${HOME}/usr
Step 12: compile taglib-extras
This has lately been moved out of the amarok svn and needs to be compiled on its own. Run the following steps:
cd ${HOME}/kde/src/taglib-extras/
mkdir build
cd build
export LD_LIBRARY_PATH=${HOME}/kde/build/taglib-extras/taglib-extras
cmake -DCMAKE_INSTALL_PREFIX=${HOME}/kde ..
make
make install
Step 13: Compile QtScriptGenerator
This is another part that was recently moved out of the amarok svn and there are still a few issues with it. Just run the code below or download newer versions at http://code.google.com/p/qtscriptgenerator/downloads/list :
cd ${HOME}/kde/src
wget http://qtscriptgenerator.googlecode.com/files/qtscriptgenerator-src-0.1.0.tar.gz
tar xfvz qtscriptgenerator-src-0.1.0.tar.gz
cd qtscriptgenerator-src-0.1.0
The current version 0.1.0 has a few issues with *buntu. Because of that you need to patch it by running the following from the qtscriptgenerator-0.1.0 directory:
nano include_everything.patch
And add this code to it:
--- b/generator/qtscript_masterinclude.h 2009-03-21 20:37:30.719523909 -0400
+++ a/generator/qtscript_masterinclude.h 2009-03-21 21:00:25.108149339 -0400
@@ -31,17 +31,41 @@
#include <QtUiTools/QtUiTools>
-#ifndef QT_NO_XMLPATTERNS
-# include <QtXmlPatterns/QtXmlPatterns>
-#endif
-
-#ifndef QT_NO_WEBKIT
-# include <QtWebKit/QtWebKit>
-#endif
-
-#ifndef QT_NO_PHONON
-# include <phonon/phonon>
-#endif
+#include <QtXmlPatterns/QtXmlPatterns>
+
+#include <QtWebKit/QtWebKit>
+
+#include "phonon/abstractaudiooutput.h"
+#include "phonon/abstractmediastream.h"
+#include "phonon/abstractvideooutput.h"
+#include "phonon/addoninterface.h"
+#include "phonon/audiooutput.h"
+#include "phonon/audiooutputinterface.h"
+#include "phonon/backendcapabilities.h"
+#include "phonon/backendinterface.h"
+#include "phonon/effect.h"
+#include "phonon/effectinterface.h"
+#include "phonon/effectparameter.h"
+#include "phonon/effectwidget.h"
+#include "phonon/mediacontroller.h"
+#include "phonon/medianode.h"
+#include "phonon/mediaobject.h"
+#include "phonon/mediaobjectinterface.h"
+#include "phonon/mediasource.h"
+#include "phonon/objectdescription.h"
+#include "phonon/objectdescriptionmodel.h"
+#include "phonon/path.h"
+#include "phonon/phonondefs.h"
+#include "phonon/phononnamespace.h"
+#include "phonon/platformplugin.h"
+#include "phonon/seekslider.h"
+#include "phonon/streaminterface.h"
+#include "phonon/videoplayer.h"
+#include "phonon/videowidget.h"
+#include "phonon/videowidgetinterface.h"
+#include "phonon/volumefadereffect.h"
+#include "phonon/volumefaderinterface.h"
+#include "phonon/volumeslider.h"
#include "../qtbindings/qtscript_core/qtscriptconcurrent.h"
Now run the following command to patch the source:
patch -p1 < include_everything.patch
Once you've done that, you can compile qtscriptgenerator and the plugings by running the following:
export INCLUDE=/usr/include/qt4
cd generator
qmake
make
./generator
cd ../qtbindings
qmake
make
Once you're done you'll need to copy the plugins to /usr/lib/qt4/plugins/script:
cd ../plugins/script
sudo cp -R * /usr/lib/qt4/plugins/script/
Step 14: Compile Amarok 2
Finally we've reached the point where we can compile Amarok 2:
cd ${HOME}/kde/src/amarok
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=${HOME}/kde -DCMAKE_BUILD_TYPE=debugfull ${HOME}/kde/src/amarok
make
make install
After the cmake you will get a few warnings but compiling and installation should go without errors.
Step 15: Update KDE config
Now you need to update the KDE config:
kbuildsycoca4 --noincremental
Step 16: Run Amarok 2
Finally you can run Amarok 2 by issuing the following command in the terminal. I have yet to find a way to start it from the menu.:
amarok