Thiras
February 15th, 2009, 02:24 PM
Hi. I am on Ubuntu Intrepid. I have got WD mybook home Edition 1TB(ntfs). It's connected to my pc with e-sata. There is no problem expect its little bit slow when i am coping the datas to it. But when sometimes i am copying the big datas from mybook to internal hdd the connection is lost and i cant reach "mybook" without reboot. Here is dmesg logs.
Thank you for your help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3ff80 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[ 0.000000] RAMDISK: 3781d000 - 37fefc12
[ 0.000000] ACPI: RSDP 000FAF20, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FF80000, 0040 (r1 A_M_I_ OEMRSDT 11000716 MSFT 97)
[ 0.000000] ACPI: FACP 3FF80200, 0081 (r1 A_M_I_ OEMFACP 11000716 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 3FF8E000, 0040
[ 0.000000] ACPI: APIC 3FF80390, 0080 (r1 A_M_I_ OEMAPIC 11000716 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF8E040, 0066 (r1 A_M_I_ AMI_OEM 11000716 MSFT 97)
[ 0.000000] ACPI: HPET 3FF89AF0, 0038 (r1 A_M_I_ OEMHPET 11000716 MSFT 97)
[ 0.000000] ACPI: MCFG 3FF89B30, 003C (r1 A_M_I_ OEMMCFG 11000716 MSFT 97)
[ 0.000000] ACPI: SSDT 3FF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.000000] ACPI: SSDT 3FF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00011000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [003781d000 - 0037fefc12] RAMDISK ==> [003781d000 - 0037fefc12]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003ff80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ff80
[ 0.000000] On node 0 totalpages: 261903
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000240
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32353 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259600
[ 0.000000] Kernel command line: root=UUID=ef836df2-ee4a-4a41-8c75-670e96c0d39f ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 1869.855 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1024104k/1048064k available (2576k kernel code, 23120k reserved, 1165k data, 424k init, 130560k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3739.71 BogoMIPS (lpj=7479420)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017902] ACPI: Core revision 20080609
[ 0.020860] ACPI: Checking initramfs for custom DSDT
[ 0.384216] ENABLING IO-APIC IRQs
[ 0.384388] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.425437] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.428026] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3517.60 BogoMIPS (lpj=7035209)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.512524] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.512540] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.516051] Brought up 2 CPUs
[ 0.516054] Total of 2 processors activated (7257.31 BogoMIPS).
[ 0.516075] CPU0 attaching sched-domain:
[ 0.516078] domain 0: span 0-1 level MC
[ 0.516081] groups: 0 1
[ 0.516087] CPU1 attaching sched-domain:
[ 0.516089] domain 0: span 0-1 level MC
[ 0.516092] groups: 1 0
[ 0.516169] net_namespace: 840 bytes
[ 0.516169] Booting paravirtualized kernel on bare hardware
[ 0.516300] Time: 14:34:15 Date: 02/15/09
[ 0.516325] NET: Registered protocol family 16
[ 0.516345] EISA bus registered
[ 0.516345] ACPI: bus type pci registered
[ 0.516345] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.516345] PCI: Not using MMCONFIG.
[ 0.516345] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.516345] PCI: Using configuration type 1 for base access
[ 0.517156] ACPI: EC: Look up EC in DSDT
[ 0.535960] ACPI: Interpreter enabled
[ 0.535967] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.535986] ACPI: Using IOAPIC for interrupt routing
[ 0.536060] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.539474] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.539477] PCI: Using MMCONFIG for extended config space
[ 0.548185] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.548185] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.548185] pci 0000:00:01.0: PME# disabled
[ 0.548185] PCI: 0000:00:1b.0 reg 10 64bit mmio: [ffafc000, ffafffff]
[ 0.548209] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.548213] pci 0000:00:1b.0: PME# disabled
[ 0.548261] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.548265] pci 0000:00:1c.0: PME# disabled
[ 0.548316] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.548320] pci 0000:00:1c.3: PME# disabled
[ 0.548370] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.548374] pci 0000:00:1c.4: PME# disabled
[ 0.548423] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.548427] pci 0000:00:1c.5: PME# disabled
[ 0.548462] PCI: 0000:00:1d.0 reg 20 io port: [e480, e49f]
[ 0.548510] PCI: 0000:00:1d.1 reg 20 io port: [e800, e81f]
[ 0.548557] PCI: 0000:00:1d.2 reg 20 io port: [e880, e89f]
[ 0.548604] PCI: 0000:00:1d.3 reg 20 io port: [ec00, ec1f]
[ 0.548656] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffafbc00, ffafbfff]
[ 0.548702] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.548706] pci 0000:00:1d.7: PME# disabled
[ 0.548818] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.548822] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.548845] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.548852] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.548859] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.548865] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.548872] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
[ 0.548911] PCI: 0000:00:1f.2 reg 10 io port: [e400, e407]
[ 0.548917] PCI: 0000:00:1f.2 reg 14 io port: [e080, e083]
[ 0.548923] PCI: 0000:00:1f.2 reg 18 io port: [e000, e007]
[ 0.548929] PCI: 0000:00:1f.2 reg 1c io port: [dc00, dc03]
[ 0.548935] PCI: 0000:00:1f.2 reg 20 io port: [d880, d88f]
[ 0.548942] PCI: 0000:00:1f.2 reg 24 32bit mmio: [ffafb800, ffafbbff]
[ 0.548959] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.548963] pci 0000:00:1f.2: PME# disabled
[ 0.549004] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.549054] PCI: 0000:06:00.0 reg 10 64bit mmio: [d0000000, dfffffff]
[ 0.549064] PCI: 0000:06:00.0 reg 18 64bit mmio: [ff9f0000, ff9fffff]
[ 0.549070] PCI: 0000:06:00.0 reg 20 io port: [c800, c8ff]
[ 0.549079] PCI: 0000:06:00.0 reg 30 32bit mmio: [ff9c0000, ff9dffff]
[ 0.549094] pci 0000:06:00.0: supports D1
[ 0.549096] pci 0000:06:00.0: supports D2
[ 0.549120] PCI: 0000:06:00.1 reg 10 64bit mmio: [ff9e0000, ff9effff]
[ 0.549151] pci 0000:06:00.1: supports D1
[ 0.549153] pci 0000:06:00.1: supports D2
[ 0.549192] PCI: bridge 0000:00:01.0 io port: [c000, cfff]
[ 0.549196] PCI: bridge 0000:00:01.0 32bit mmio: [ff900000, ff9fffff]
[ 0.549201] PCI: bridge 0000:00:01.0 64bit mmio pref: [cff00000, efefffff]
[ 0.549247] PCI: bridge 0000:00:1c.0 64bit mmio pref: [cfe00000, cfefffff]
[ 0.549307] PCI: 0000:04:00.0 reg 10 64bit mmio: [ff8fc000, ff8fffff]
[ 0.549316] PCI: 0000:04:00.0 reg 18 io port: [b800, b8ff]
[ 0.549343] PCI: 0000:04:00.0 reg 30 32bit mmio: [ff8c0000, ff8dffff]
[ 0.549363] pci 0000:04:00.0: supports D1
[ 0.549365] pci 0000:04:00.0: supports D2
[ 0.549367] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.549373] pci 0000:04:00.0: PME# disabled
[ 0.549407] PCI: bridge 0000:00:1c.3 io port: [b000, bfff]
[ 0.549412] PCI: bridge 0000:00:1c.3 32bit mmio: [ff800000, ff8fffff]
[ 0.549475] PCI: 0000:03:00.0 reg 10 64bit mmio: [ff7fc000, ff7fffff]
[ 0.549484] PCI: 0000:03:00.0 reg 18 io port: [a800, a8ff]
[ 0.549511] PCI: 0000:03:00.0 reg 30 32bit mmio: [ff7c0000, ff7dffff]
[ 0.549531] pci 0000:03:00.0: supports D1
[ 0.549533] pci 0000:03:00.0: supports D2
[ 0.549535] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.549540] pci 0000:03:00.0: PME# disabled
[ 0.549575] PCI: bridge 0000:00:1c.4 io port: [a000, afff]
[ 0.549579] PCI: bridge 0000:00:1c.4 32bit mmio: [ff700000, ff7fffff]
[ 0.549676] PCI: 0000:02:00.0 reg 24 32bit mmio: [ff6fe000, ff6fffff]
[ 0.549686] PCI: 0000:02:00.0 reg 30 32bit mmio: [ff6e0000, ff6effff]
[ 0.549710] pci 0000:02:00.0: PME# supported from D3hot
[ 0.549716] pci 0000:02:00.0: PME# disabled
[ 0.549757] PCI: 0000:02:00.1 reg 10 io port: [9c00, 9c07]
[ 0.549766] PCI: 0000:02:00.1 reg 14 io port: [9880, 9883]
[ 0.549775] PCI: 0000:02:00.1 reg 18 io port: [9800, 9807]
[ 0.549785] PCI: 0000:02:00.1 reg 1c io port: [9480, 9483]
[ 0.549794] PCI: 0000:02:00.1 reg 20 io port: [9400, 940f]
[ 0.549874] PCI: bridge 0000:00:1c.5 io port: [9000, 9fff]
[ 0.549878] PCI: bridge 0000:00:1c.5 32bit mmio: [ff600000, ff6fffff]
[ 0.549921] PCI: 0000:01:03.0 reg 10 32bit mmio: [ff5ff800, ff5fffff]
[ 0.549929] PCI: 0000:01:03.0 reg 14 32bit mmio: [ff5f8000, ff5fbfff]
[ 0.549969] pci 0000:01:03.0: supports D1
[ 0.549971] pci 0000:01:03.0: supports D2
[ 0.549973] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.549978] pci 0000:01:03.0: PME# disabled
[ 0.550016] pci 0000:00:1e.0: transparent bridge
[ 0.550022] PCI: bridge 0000:00:1e.0 32bit mmio: [ff500000, ff5fffff]
[ 0.550052] bus 00 -> node 0
[ 0.550059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.550367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.550508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.550743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.550884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.550996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.552119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.556181] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.556352] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.556520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.556688] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.556854] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.557021] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.557188] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.557356] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.557433] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - EE, should be E5 [20080609]
[ 0.557433] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.557433] pnp: PnP ACPI init
[ 0.557433] ACPI: bus type pnp registered
[ 0.560810] pnp: PnP ACPI: found 16 devices
[ 0.560810] ACPI: ACPI bus type pnp unregistered
[ 0.560810] PnPBIOS: Disabled by ACPI PNP
[ 0.560810] PCI: Using ACPI for IRQ routing
[ 0.568041] NET: Registered protocol family 8
[ 0.568043] NET: Registered protocol family 20
[ 0.568060] NetLabel: Initializing
[ 0.568060] NetLabel: domain hash size = 128
[ 0.568060] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.568068] NetLabel: unlabeled traffic allowed by default
[ 0.568074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.568079] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.570060] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.570063] actual entries 65620
[ 0.570147] AppArmor: AppArmor Filesystem Enabled
[ 0.570166] ACPI: RTC can wake from S4
[ 0.572041] Switched to high resolution mode on CPU 0
[ 0.572557] Switched to high resolution mode on CPU 1
[ 0.576023] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.576033] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.576047] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.576050] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.576053] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.576056] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.576059] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.576063] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.576066] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.576069] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.576073] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.576082] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.576085] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.576094] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.576101] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.576104] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved
[ 0.576107] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.576111] system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.611250] pci 0000:00:01.0: PCI bridge, secondary bus 0000:06
[ 0.611253] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.611258] pci 0000:00:01.0: MEM window: 0xff900000-0xff9fffff
[ 0.611262] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000efefffff
[ 0.611267] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.611269] pci 0000:00:1c.0: IO window: disabled
[ 0.611274] pci 0000:00:1c.0: MEM window: disabled
[ 0.611278] pci 0000:00:1c.0: PREFETCH window: 0x000000cfe00000-0x000000cfefffff
[ 0.611285] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.611288] pci 0000:00:1c.3: IO window: 0xb000-0xbfff
[ 0.611293] pci 0000:00:1c.3: MEM window: 0xff800000-0xff8fffff
[ 0.611297] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.611303] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.611307] pci 0000:00:1c.4: IO window: 0xa000-0xafff
[ 0.611312] pci 0000:00:1c.4: MEM window: 0xff700000-0xff7fffff
[ 0.611316] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.611322] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.611326] pci 0000:00:1c.5: IO window: 0x9000-0x9fff
[ 0.611331] pci 0000:00:1c.5: MEM window: 0xff600000-0xff6fffff
[ 0.611335] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.611341] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.611343] pci 0000:00:1e.0: IO window: disabled
[ 0.611348] pci 0000:00:1e.0: MEM window: 0xff500000-0xff5fffff
[ 0.611352] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.611366] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611371] pci 0000:00:01.0: setting latency timer to 64
[ 0.611378] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611382] pci 0000:00:1c.0: setting latency timer to 64
[ 0.611390] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.611395] pci 0000:00:1c.3: setting latency timer to 64
[ 0.611402] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611407] pci 0000:00:1c.4: setting latency timer to 64
[ 0.611415] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.611419] pci 0000:00:1c.5: setting latency timer to 64
[ 0.611426] pci 0000:00:1e.0: setting latency timer to 64
[ 0.611430] bus: 00 index 0 io port: [0, ffff]
[ 0.611432] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.611434] bus: 06 index 0 io port: [c000, cfff]
[ 0.611437] bus: 06 index 1 mmio: [ff900000, ff9fffff]
[ 0.611439] bus: 06 index 2 mmio: [cff00000, efefffff]
[ 0.611441] bus: 06 index 3 mmio: [0, 0]
[ 0.611443] bus: 05 index 0 mmio: [0, 0]
[ 0.611445] bus: 05 index 1 mmio: [0, 0]
[ 0.611448] bus: 05 index 2 mmio: [cfe00000, cfefffff]
[ 0.611450] bus: 05 index 3 mmio: [0, 0]
[ 0.611452] bus: 04 index 0 io port: [b000, bfff]
[ 0.611454] bus: 04 index 1 mmio: [ff800000, ff8fffff]
[ 0.611457] bus: 04 index 2 mmio: [0, 0]
[ 0.611459] bus: 04 index 3 mmio: [0, 0]
[ 0.611461] bus: 03 index 0 io port: [a000, afff]
[ 0.611463] bus: 03 index 1 mmio: [ff700000, ff7fffff]
[ 0.611465] bus: 03 index 2 mmio: [0, 0]
[ 0.611467] bus: 03 index 3 mmio: [0, 0]
[ 0.611470] bus: 02 index 0 io port: [9000, 9fff]
[ 0.611472] bus: 02 index 1 mmio: [ff600000, ff6fffff]
[ 0.611474] bus: 02 index 2 mmio: [0, 0]
[ 0.611476] bus: 02 index 3 mmio: [0, 0]
[ 0.611478] bus: 01 index 0 mmio: [0, 0]
[ 0.611480] bus: 01 index 1 mmio: [ff500000, ff5fffff]
[ 0.611483] bus: 01 index 2 mmio: [0, 0]
[ 0.611485] bus: 01 index 3 io port: [0, ffff]
[ 0.611487] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.611495] NET: Registered protocol family 2
[ 0.624053] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.624290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.624669] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.624877] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.624880] TCP reno registered
[ 0.632082] NET: Registered protocol family 1
[ 0.632195] checking if image is initramfs... it is
[ 1.361376] Freeing initrd memory: 8011k freed
[ 1.362537] audit: initializing netlink socket (disabled)
[ 1.362561] type=2000 audit(1234708455.360:1): initialized
[ 1.368834] highmem bounce pool size: 64 pages
[ 1.368840] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.371286] VFS: Disk quotas dquot_6.5.1
[ 1.371377] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.371483] msgmni has been set to 1761
[ 1.371610] io scheduler noop registered
[ 1.371613] io scheduler anticipatory registered
[ 1.371616] io scheduler deadline registered
[ 1.371628] io scheduler cfq registered (default)
[ 1.371726] pci 0000:06:00.0: Boot video device
[ 1.371856] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.371892] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.371923] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.371968] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.372059] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.372092] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.372125] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.372173] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.372214] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.372303] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.372335] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.372369] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.372409] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.372498] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.372536] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.372569] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.372610] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.372698] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.372731] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.372763] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.372804] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.373141] isapnp: Scanning for PnP cards...
[ 1.705199] isapnp: No Plug & Play device found
[ 1.739656] hpet_resources: 0xfed00000 is busy
[ 1.739729] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.739852] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.740672] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.742572] brd: module loaded
[ 1.742648] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.742783] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.745318] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.745325] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.745553] mice: PS/2 mouse device common for all mice
[ 1.745682] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.745704] rtc0: alarms up to one month, hpet irqs
[ 1.745841] EISA: Probing bus 0 at eisa.0
[ 1.745868] EISA: Detected 0 cards.
[ 1.745871] cpuidle: using governor ladder
[ 1.745874] cpuidle: using governor menu
[ 1.746410] TCP cubic registered
[ 1.746437] Using IPI No-Shortcut mode
[ 1.746614] registered taskstats version 1
[ 1.746758] Magic number: 13:614:586
[ 1.746787] tty ptyc4: hash matches
[ 1.746845] rtc_cmos 00:03: setting system clock to 2009-02-15 14:34:16 UTC (1234708456)
[ 1.746849] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.746851] EDD information not available.
[ 1.747040] Freeing unused kernel memory: 424k freed
[ 1.747079] Write protecting the kernel text: 2580k
[ 1.747107] Write protecting the kernel read-only data: 940k
[ 1.763308] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.894099] fuse init (API version 7.9)
[ 1.996926] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU1._OSC] (Node f7411198), AE_ALREADY_EXISTS
[ 1.996937] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 1.996986] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f7411180), AE_ALREADY_EXISTS
[ 1.996993] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[ 1.997117] processor ACPI0007:00: registered as cooling_device0
[ 1.997122] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.997431] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU2._OSC] (Node f7411270), AE_ALREADY_EXISTS
[ 1.997439] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 1.997484] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU2._PDC] (Node f7411258), AE_ALREADY_EXISTS
[ 1.997491] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[ 1.997605] processor ACPI0007:01: registered as cooling_device1
[ 1.997610] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 2.319968] usbcore: registered new interface driver usbfs
[ 2.319992] usbcore: registered new interface driver hub
[ 2.320039] usbcore: registered new device driver usb
[ 2.330058] USB Universal Host Controller Interface driver v3.0
[ 2.330120] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.330130] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.330133] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.330189] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.330220] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
[ 2.330366] usb usb1: configuration #1 chosen from 1 choice
[ 2.330394] hub 1-0:1.0: USB hub found
[ 2.330401] hub 1-0:1.0: 2 ports detected
[ 2.332397] No dock devices found.
[ 2.347780] SCSI subsystem initialized
[ 2.432231] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.432242] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.432245] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.432272] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.432303] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
[ 2.432394] usb usb2: configuration #1 chosen from 1 choice
[ 2.432426] hub 2-0:1.0: USB hub found
[ 2.432436] hub 2-0:1.0: 2 ports detected
[ 2.439862] libata version 3.00 loaded.
[ 2.455368] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.536284] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.536295] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.536299] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.536327] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.536358] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 2.536451] usb usb3: configuration #1 chosen from 1 choice
[ 2.536484] hub 3-0:1.0: USB hub found
[ 2.536491] hub 3-0:1.0: 2 ports detected
[ 2.640260] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.640272] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.640276] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.640303] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.640335] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
[ 2.640428] usb usb4: configuration #1 chosen from 1 choice
[ 2.640456] hub 4-0:1.0: USB hub found
[ 2.640463] hub 4-0:1.0: 2 ports detected
[ 2.849075] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.849091] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.849095] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.849125] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.853021] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.853027] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.853035] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffafbc00
[ 2.960016] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 2.972012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.972148] usb usb5: configuration #1 chosen from 1 choice
[ 2.972178] hub 5-0:1.0: USB hub found
[ 2.972186] hub 5-0:1.0: 8 ports detected
[ 3.028038] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 3.180190] ata_piix 0000:00:1f.1: version 2.12
[ 3.180206] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.180245] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.180308] scsi0 : ata_piix
[ 3.180398] scsi1 : ata_piix
[ 3.181940] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.181943] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.292014] usb 5-7: new high speed USB device using ehci_hcd and address 2
[ 3.344330] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
[ 3.360268] ata1.00: configured for UDMA/33
[ 3.425407] usb 5-7: configuration #1 chosen from 1 choice
[ 3.425853] hub 5-7:1.0: USB hub found
[ 3.426083] hub 5-7:1.0: 4 ports detected
[ 3.530472] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
[ 3.530894] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 3.530899] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.684020] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.684074] scsi2 : ata_piix
[ 3.684359] scsi3 : ata_piix
[ 3.684411] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 23
[ 3.684414] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 23
[ 3.704341] usb 5-7.3: new high speed USB device using ehci_hcd and address 3
[ 3.802670] usb 5-7.3: configuration #1 chosen from 1 choice
[ 3.892262] ata3.00: ATA-7: ST3250820AS, 3.AAC, max UDMA/133
[ 3.892265] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.958900] ata3.00: configured for UDMA/133
[ 4.560285] ata4.00: unsupported device, disabling
[ 4.560287] ata4.00: disabled
[ 4.560384] scsi 2:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
[ 4.560481] sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.560490] sky2 0000:04:00.0: setting latency timer to 64
[ 4.560518] sky2 0000:04:00.0: v1.22 addr 0xff8fc000 irq 19 Yukon-2 EC rev 2
[ 4.560946] sky2 eth0: addr 00:18:f3:64:78:25
[ 4.560963] sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.560970] sky2 0000:03:00.0: setting latency timer to 64
[ 4.560986] sky2 0000:03:00.0: v1.22 addr 0xff7fc000 irq 16 Yukon-2 EC rev 2
[ 4.561395] sky2 eth1: addr 00:18:f3:64:53:6d
[ 4.561431] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 4.561438] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 4.561470] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 4.561527] scsi4 : pata_jmicron
[ 4.561704] scsi5 : pata_jmicron
[ 4.562546] ata5: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 18
[ 4.562549] ata6: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 18
[ 4.882855] ahci 0000:02:00.0: version 3.0
[ 4.882874] ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.896036] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 4.896040] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 4.896047] ahci 0000:02:00.0: setting latency timer to 64
[ 4.896168] scsi6 : ahci
[ 4.896536] scsi7 : ahci
[ 4.896610] ata7: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe100 irq 17
[ 4.896614] ata8: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe180 irq 17
[ 5.380020] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.517948] ata7.00: ATA-6: WD My Book, 01.01B01, max UDMA/133
[ 5.517951] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 1)
[ 5.690932] ata7.00: configured for UDMA/133
[ 6.024024] ata8: SATA link down (SStatus 0 SControl 300)
[ 6.040108] scsi 6:0:0:0: Direct-Access ATA WD My Book 01.0 PQ: 0 ANSI: 5
[ 6.040248] ohci1394 0000:01:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.089980] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff5ff800-ff5fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.100708] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.100749] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.100789] scsi 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.125563] Driver 'sd' needs updating - please use bus_type methods
[ 6.125674] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.125692] sd 2:0:0:0: [sda] Write Protect is off
[ 6.125695] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.125723] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.125796] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.125812] sd 2:0:0:0: [sda] Write Protect is off
[ 6.125815] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.125843] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.125847] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.139263] sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.146028] Uniform CD-ROM driver Revision: 3.20
[ 6.146113] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.151231] sda5 sda6 >
[ 6.158765] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.158840] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.158857] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.158860] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.158888] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.158947] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.158963] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.158966] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.158993] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.158997] sdb: sdb1
[ 6.533946] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 6.818865] PM: Starting manual resume from disk
[ 6.818868] PM: Resume from partition 8:5
[ 6.818870] PM: Checking hibernation image.
[ 6.819045] PM: Resume from disk failed.
[ 6.856258] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.856262] EXT3-fs: write access will be enabled during recovery.
[ 7.364269] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000df310b]
[ 16.901174] kjournald starting. Commit interval 5 seconds
[ 16.901184] EXT3-fs: recovery complete.
[ 16.917759] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.132351] udevd version 124 started
[ 21.649134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.689391] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.768639] EDAC MC: Ver: 2.1.0 Jan 29 2009
[ 21.937937] iTCO_vendor_support: vendor-support=0
[ 21.992696] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 22.012037] ACPI: Power Button (FF) [PWRF]
[ 22.012195] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 22.044023] ACPI: Power Button (CM) [PWRB]
[ 22.120517] EDAC i82975x: ECC disabled on both channels.
[ 22.164131] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 22.167260] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 22.167345] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.288286] Linux agpgart interface v0.103
[ 22.332002] intel_rng: FWH not detected
[ 22.513844] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 22.558835] [fglrx] Maximum main memory to use for locked dma buffers: 926 MBytes.
[ 22.559289] [fglrx] vendor: 1002 device: 71ce count: 1
[ 22.560380] [fglrx] ioport: bar 4, base 0xc800, size: 0x100
[ 22.560395] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.560401] pci 0000:06:00.0: setting latency timer to 64
[ 22.561958] [fglrx] PAT is enabled successfully!
[ 22.562029] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 22.647253] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 22.979788] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 22.979808] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.138449] phy0: Selected rate control algorithm 'pid'
[ 23.321244] phy0: hwaddr 00:15:af:09:ae:b5, RTL8187vB (default) V1 + rtl8225z2
[ 23.321270] usbcore: registered new interface driver rtl8187
[ 23.488736] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 24.061722] lp: driver loaded but no devices found
[ 24.241871] Adding 2634620k swap on /dev/sda5. Priority:-1 extents:1 across:2634620k
[ 24.788095] EXT3 FS on sda1, internal journal
[ 69.781528] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[ 69.781539] ReiserFS: sda6: using ordered data mode
[ 69.788721] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 69.788930] ReiserFS: sda6: checking transaction log (sda6)
[ 69.847531] ReiserFS: sda6: Using r5 hash to sort names
[ 70.019998] type=1505 audit(1234708525.084:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=5082
[ 70.190201] type=1505 audit(1234708525.256:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=5087
[ 70.190410] type=1505 audit(1234708525.256:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=5087
[ 70.278744] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 70.701467] ACPI: WMI: Mapper loaded
[ 71.422124] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 71.577706] NET: Registered protocol family 10
[ 71.578548] lo: Disabled Privacy Extensions
[ 71.648998] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 71.649003] apm: disabled - APM is not SMP safe.
[ 71.868022] ppdev: user-space parallel port driver
[ 74.193593] Bluetooth: Core ver 2.13
[ 74.194040] NET: Registered protocol family 31
[ 74.194045] Bluetooth: HCI device and connection manager initialized
[ 74.194049] Bluetooth: HCI socket layer initialized
[ 74.212792] Bluetooth: L2CAP ver 2.11
[ 74.212798] Bluetooth: L2CAP socket layer initialized
[ 74.224734] Bluetooth: SCO (Voice Link) ver 0.6
[ 74.224742] Bluetooth: SCO socket layer initialized
[ 74.245876] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 74.245882] Bluetooth: BNEP filters: protocol multicast
[ 74.281244] Bridge firewalling registered
[ 74.343715] Bluetooth: RFCOMM socket layer initialized
[ 74.343918] Bluetooth: RFCOMM TTY layer initialized
[ 74.343923] Bluetooth: RFCOMM ver 1.10
[ 76.437631] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 76.437640] [fglrx] Reserved FB block: Unshared offset:1000000, size:5000
[ 76.437643] [fglrx] Reserved FB block: Unshared offset:ffbb000, size:44000
[ 76.437649] [fglrx] Reserved FB block: Unshared offset:ffff000, size:1000
[ 78.440239] sky2 eth1: enabling interface
[ 78.442482] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 78.443487] sky2 eth0: enabling interface
[ 78.445715] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 87.065623] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 87.140943] NET: Registered protocol family 17
[ 187.941345] wlan0: authenticate with AP 00:1d:19:15:a8:e8
[ 187.943068] wlan0: authenticated
[ 187.943074] wlan0: associate with AP 00:1d:19:15:a8:e8
[ 187.946320] wlan0: RX AssocResp from 00:1d:19:15:a8:e8 (capab=0x451 status=0 aid=1)
[ 187.946325] wlan0: associated
[ 187.946821] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 189.037945] padlock: VIA PadLock not detected.
[ 198.540021] wlan0: no IPv6 routers present
[13384.825211] ata7.00: exception Emask 0x10 SAct 0x1 SErr 0x780100 action 0x6
[13384.825219] ata7.00: irq_stat 0x08000000
[13384.825222] ata7: SError: { UnrecovData 10B8B Dispar BadCRC Handshk }
[13384.825229] ata7.00: cmd 60/f8:00:27:0a:92/00:00:03:00:00/40 tag 0 ncq 126976 in
[13384.825231] res 40/00:04:27:0a:92/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
[13384.825235] ata7.00: status: { DRDY }
[13384.825241] ata7: hard resetting link
[13385.144031] ata7: SATA link down (SStatus 0 SControl 300)
[13390.144017] ata7: hard resetting link
[13390.468033] ata7: SATA link down (SStatus 0 SControl 300)
[13395.468017] ata7: hard resetting link
[13395.788033] ata7: SATA link down (SStatus 0 SControl 300)
[13395.788045] ata7.00: disabled
[13395.788068] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[13395.788074] sd 6:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
[13395.788080] Descriptor sense data with sense descriptors (in hex):
[13395.788083] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[13395.788096] 03 92 0a 27
[13395.788102] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information
[13395.788108] end_request: I/O error, dev sdb, sector 59902503
[13395.788114] Buffer I/O error on device sdb1, logical block 7487805
[13395.788123] Buffer I/O error on device sdb1, logical block 7487806
[13395.788127] Buffer I/O error on device sdb1, logical block 7487807
[13395.788132] Buffer I/O error on device sdb1, logical block 7487808
[13395.788136] Buffer I/O error on device sdb1, logical block 7487809
[13395.788140] Buffer I/O error on device sdb1, logical block 7487810
[13395.788144] Buffer I/O error on device sdb1, logical block 7487811
[13395.788148] Buffer I/O error on device sdb1, logical block 7487812
[13395.788152] Buffer I/O error on device sdb1, logical block 7487813
[13395.788156] Buffer I/O error on device sdb1, logical block 7487814
[13395.788194] ata7: EH complete
[13395.788204] ata7.00: detaching (SCSI 6:0:0:0)
[13395.830704] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[13395.830769] sd 6:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[13395.830778] sd 6:0:0:0: [sdb] Stopping disk
[13395.831585] sd 6:0:0:0: [sdb] START_STOP FAILED
[13395.831591] sd 6:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Thank you for your help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3ff80 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[ 0.000000] RAMDISK: 3781d000 - 37fefc12
[ 0.000000] ACPI: RSDP 000FAF20, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FF80000, 0040 (r1 A_M_I_ OEMRSDT 11000716 MSFT 97)
[ 0.000000] ACPI: FACP 3FF80200, 0081 (r1 A_M_I_ OEMFACP 11000716 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 3FF8E000, 0040
[ 0.000000] ACPI: APIC 3FF80390, 0080 (r1 A_M_I_ OEMAPIC 11000716 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF8E040, 0066 (r1 A_M_I_ AMI_OEM 11000716 MSFT 97)
[ 0.000000] ACPI: HPET 3FF89AF0, 0038 (r1 A_M_I_ OEMHPET 11000716 MSFT 97)
[ 0.000000] ACPI: MCFG 3FF89B30, 003C (r1 A_M_I_ OEMMCFG 11000716 MSFT 97)
[ 0.000000] ACPI: SSDT 3FF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.000000] ACPI: SSDT 3FF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00011000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [003781d000 - 0037fefc12] RAMDISK ==> [003781d000 - 0037fefc12]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003ff80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ff80
[ 0.000000] On node 0 totalpages: 261903
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000240
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32353 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259600
[ 0.000000] Kernel command line: root=UUID=ef836df2-ee4a-4a41-8c75-670e96c0d39f ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 1869.855 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1024104k/1048064k available (2576k kernel code, 23120k reserved, 1165k data, 424k init, 130560k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3739.71 BogoMIPS (lpj=7479420)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017902] ACPI: Core revision 20080609
[ 0.020860] ACPI: Checking initramfs for custom DSDT
[ 0.384216] ENABLING IO-APIC IRQs
[ 0.384388] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.425437] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.428026] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3517.60 BogoMIPS (lpj=7035209)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.512524] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.512540] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.516051] Brought up 2 CPUs
[ 0.516054] Total of 2 processors activated (7257.31 BogoMIPS).
[ 0.516075] CPU0 attaching sched-domain:
[ 0.516078] domain 0: span 0-1 level MC
[ 0.516081] groups: 0 1
[ 0.516087] CPU1 attaching sched-domain:
[ 0.516089] domain 0: span 0-1 level MC
[ 0.516092] groups: 1 0
[ 0.516169] net_namespace: 840 bytes
[ 0.516169] Booting paravirtualized kernel on bare hardware
[ 0.516300] Time: 14:34:15 Date: 02/15/09
[ 0.516325] NET: Registered protocol family 16
[ 0.516345] EISA bus registered
[ 0.516345] ACPI: bus type pci registered
[ 0.516345] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.516345] PCI: Not using MMCONFIG.
[ 0.516345] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.516345] PCI: Using configuration type 1 for base access
[ 0.517156] ACPI: EC: Look up EC in DSDT
[ 0.535960] ACPI: Interpreter enabled
[ 0.535967] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.535986] ACPI: Using IOAPIC for interrupt routing
[ 0.536060] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.539474] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.539477] PCI: Using MMCONFIG for extended config space
[ 0.548185] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.548185] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.548185] pci 0000:00:01.0: PME# disabled
[ 0.548185] PCI: 0000:00:1b.0 reg 10 64bit mmio: [ffafc000, ffafffff]
[ 0.548209] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.548213] pci 0000:00:1b.0: PME# disabled
[ 0.548261] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.548265] pci 0000:00:1c.0: PME# disabled
[ 0.548316] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.548320] pci 0000:00:1c.3: PME# disabled
[ 0.548370] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.548374] pci 0000:00:1c.4: PME# disabled
[ 0.548423] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.548427] pci 0000:00:1c.5: PME# disabled
[ 0.548462] PCI: 0000:00:1d.0 reg 20 io port: [e480, e49f]
[ 0.548510] PCI: 0000:00:1d.1 reg 20 io port: [e800, e81f]
[ 0.548557] PCI: 0000:00:1d.2 reg 20 io port: [e880, e89f]
[ 0.548604] PCI: 0000:00:1d.3 reg 20 io port: [ec00, ec1f]
[ 0.548656] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffafbc00, ffafbfff]
[ 0.548702] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.548706] pci 0000:00:1d.7: PME# disabled
[ 0.548818] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.548822] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.548845] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.548852] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.548859] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.548865] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.548872] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
[ 0.548911] PCI: 0000:00:1f.2 reg 10 io port: [e400, e407]
[ 0.548917] PCI: 0000:00:1f.2 reg 14 io port: [e080, e083]
[ 0.548923] PCI: 0000:00:1f.2 reg 18 io port: [e000, e007]
[ 0.548929] PCI: 0000:00:1f.2 reg 1c io port: [dc00, dc03]
[ 0.548935] PCI: 0000:00:1f.2 reg 20 io port: [d880, d88f]
[ 0.548942] PCI: 0000:00:1f.2 reg 24 32bit mmio: [ffafb800, ffafbbff]
[ 0.548959] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.548963] pci 0000:00:1f.2: PME# disabled
[ 0.549004] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.549054] PCI: 0000:06:00.0 reg 10 64bit mmio: [d0000000, dfffffff]
[ 0.549064] PCI: 0000:06:00.0 reg 18 64bit mmio: [ff9f0000, ff9fffff]
[ 0.549070] PCI: 0000:06:00.0 reg 20 io port: [c800, c8ff]
[ 0.549079] PCI: 0000:06:00.0 reg 30 32bit mmio: [ff9c0000, ff9dffff]
[ 0.549094] pci 0000:06:00.0: supports D1
[ 0.549096] pci 0000:06:00.0: supports D2
[ 0.549120] PCI: 0000:06:00.1 reg 10 64bit mmio: [ff9e0000, ff9effff]
[ 0.549151] pci 0000:06:00.1: supports D1
[ 0.549153] pci 0000:06:00.1: supports D2
[ 0.549192] PCI: bridge 0000:00:01.0 io port: [c000, cfff]
[ 0.549196] PCI: bridge 0000:00:01.0 32bit mmio: [ff900000, ff9fffff]
[ 0.549201] PCI: bridge 0000:00:01.0 64bit mmio pref: [cff00000, efefffff]
[ 0.549247] PCI: bridge 0000:00:1c.0 64bit mmio pref: [cfe00000, cfefffff]
[ 0.549307] PCI: 0000:04:00.0 reg 10 64bit mmio: [ff8fc000, ff8fffff]
[ 0.549316] PCI: 0000:04:00.0 reg 18 io port: [b800, b8ff]
[ 0.549343] PCI: 0000:04:00.0 reg 30 32bit mmio: [ff8c0000, ff8dffff]
[ 0.549363] pci 0000:04:00.0: supports D1
[ 0.549365] pci 0000:04:00.0: supports D2
[ 0.549367] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.549373] pci 0000:04:00.0: PME# disabled
[ 0.549407] PCI: bridge 0000:00:1c.3 io port: [b000, bfff]
[ 0.549412] PCI: bridge 0000:00:1c.3 32bit mmio: [ff800000, ff8fffff]
[ 0.549475] PCI: 0000:03:00.0 reg 10 64bit mmio: [ff7fc000, ff7fffff]
[ 0.549484] PCI: 0000:03:00.0 reg 18 io port: [a800, a8ff]
[ 0.549511] PCI: 0000:03:00.0 reg 30 32bit mmio: [ff7c0000, ff7dffff]
[ 0.549531] pci 0000:03:00.0: supports D1
[ 0.549533] pci 0000:03:00.0: supports D2
[ 0.549535] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.549540] pci 0000:03:00.0: PME# disabled
[ 0.549575] PCI: bridge 0000:00:1c.4 io port: [a000, afff]
[ 0.549579] PCI: bridge 0000:00:1c.4 32bit mmio: [ff700000, ff7fffff]
[ 0.549676] PCI: 0000:02:00.0 reg 24 32bit mmio: [ff6fe000, ff6fffff]
[ 0.549686] PCI: 0000:02:00.0 reg 30 32bit mmio: [ff6e0000, ff6effff]
[ 0.549710] pci 0000:02:00.0: PME# supported from D3hot
[ 0.549716] pci 0000:02:00.0: PME# disabled
[ 0.549757] PCI: 0000:02:00.1 reg 10 io port: [9c00, 9c07]
[ 0.549766] PCI: 0000:02:00.1 reg 14 io port: [9880, 9883]
[ 0.549775] PCI: 0000:02:00.1 reg 18 io port: [9800, 9807]
[ 0.549785] PCI: 0000:02:00.1 reg 1c io port: [9480, 9483]
[ 0.549794] PCI: 0000:02:00.1 reg 20 io port: [9400, 940f]
[ 0.549874] PCI: bridge 0000:00:1c.5 io port: [9000, 9fff]
[ 0.549878] PCI: bridge 0000:00:1c.5 32bit mmio: [ff600000, ff6fffff]
[ 0.549921] PCI: 0000:01:03.0 reg 10 32bit mmio: [ff5ff800, ff5fffff]
[ 0.549929] PCI: 0000:01:03.0 reg 14 32bit mmio: [ff5f8000, ff5fbfff]
[ 0.549969] pci 0000:01:03.0: supports D1
[ 0.549971] pci 0000:01:03.0: supports D2
[ 0.549973] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.549978] pci 0000:01:03.0: PME# disabled
[ 0.550016] pci 0000:00:1e.0: transparent bridge
[ 0.550022] PCI: bridge 0000:00:1e.0 32bit mmio: [ff500000, ff5fffff]
[ 0.550052] bus 00 -> node 0
[ 0.550059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.550367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.550508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.550743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.550884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.550996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.552119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.556181] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.556352] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.556520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.556688] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.556854] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.557021] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.557188] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.557356] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.557433] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - EE, should be E5 [20080609]
[ 0.557433] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.557433] pnp: PnP ACPI init
[ 0.557433] ACPI: bus type pnp registered
[ 0.560810] pnp: PnP ACPI: found 16 devices
[ 0.560810] ACPI: ACPI bus type pnp unregistered
[ 0.560810] PnPBIOS: Disabled by ACPI PNP
[ 0.560810] PCI: Using ACPI for IRQ routing
[ 0.568041] NET: Registered protocol family 8
[ 0.568043] NET: Registered protocol family 20
[ 0.568060] NetLabel: Initializing
[ 0.568060] NetLabel: domain hash size = 128
[ 0.568060] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.568068] NetLabel: unlabeled traffic allowed by default
[ 0.568074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.568079] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.570060] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.570063] actual entries 65620
[ 0.570147] AppArmor: AppArmor Filesystem Enabled
[ 0.570166] ACPI: RTC can wake from S4
[ 0.572041] Switched to high resolution mode on CPU 0
[ 0.572557] Switched to high resolution mode on CPU 1
[ 0.576023] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.576033] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.576047] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.576050] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.576053] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.576056] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.576059] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.576063] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.576066] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.576069] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.576073] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.576082] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.576085] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.576094] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.576101] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.576104] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved
[ 0.576107] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.576111] system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.611250] pci 0000:00:01.0: PCI bridge, secondary bus 0000:06
[ 0.611253] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.611258] pci 0000:00:01.0: MEM window: 0xff900000-0xff9fffff
[ 0.611262] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000efefffff
[ 0.611267] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.611269] pci 0000:00:1c.0: IO window: disabled
[ 0.611274] pci 0000:00:1c.0: MEM window: disabled
[ 0.611278] pci 0000:00:1c.0: PREFETCH window: 0x000000cfe00000-0x000000cfefffff
[ 0.611285] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.611288] pci 0000:00:1c.3: IO window: 0xb000-0xbfff
[ 0.611293] pci 0000:00:1c.3: MEM window: 0xff800000-0xff8fffff
[ 0.611297] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.611303] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.611307] pci 0000:00:1c.4: IO window: 0xa000-0xafff
[ 0.611312] pci 0000:00:1c.4: MEM window: 0xff700000-0xff7fffff
[ 0.611316] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.611322] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.611326] pci 0000:00:1c.5: IO window: 0x9000-0x9fff
[ 0.611331] pci 0000:00:1c.5: MEM window: 0xff600000-0xff6fffff
[ 0.611335] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.611341] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.611343] pci 0000:00:1e.0: IO window: disabled
[ 0.611348] pci 0000:00:1e.0: MEM window: 0xff500000-0xff5fffff
[ 0.611352] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.611366] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611371] pci 0000:00:01.0: setting latency timer to 64
[ 0.611378] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611382] pci 0000:00:1c.0: setting latency timer to 64
[ 0.611390] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.611395] pci 0000:00:1c.3: setting latency timer to 64
[ 0.611402] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.611407] pci 0000:00:1c.4: setting latency timer to 64
[ 0.611415] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.611419] pci 0000:00:1c.5: setting latency timer to 64
[ 0.611426] pci 0000:00:1e.0: setting latency timer to 64
[ 0.611430] bus: 00 index 0 io port: [0, ffff]
[ 0.611432] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.611434] bus: 06 index 0 io port: [c000, cfff]
[ 0.611437] bus: 06 index 1 mmio: [ff900000, ff9fffff]
[ 0.611439] bus: 06 index 2 mmio: [cff00000, efefffff]
[ 0.611441] bus: 06 index 3 mmio: [0, 0]
[ 0.611443] bus: 05 index 0 mmio: [0, 0]
[ 0.611445] bus: 05 index 1 mmio: [0, 0]
[ 0.611448] bus: 05 index 2 mmio: [cfe00000, cfefffff]
[ 0.611450] bus: 05 index 3 mmio: [0, 0]
[ 0.611452] bus: 04 index 0 io port: [b000, bfff]
[ 0.611454] bus: 04 index 1 mmio: [ff800000, ff8fffff]
[ 0.611457] bus: 04 index 2 mmio: [0, 0]
[ 0.611459] bus: 04 index 3 mmio: [0, 0]
[ 0.611461] bus: 03 index 0 io port: [a000, afff]
[ 0.611463] bus: 03 index 1 mmio: [ff700000, ff7fffff]
[ 0.611465] bus: 03 index 2 mmio: [0, 0]
[ 0.611467] bus: 03 index 3 mmio: [0, 0]
[ 0.611470] bus: 02 index 0 io port: [9000, 9fff]
[ 0.611472] bus: 02 index 1 mmio: [ff600000, ff6fffff]
[ 0.611474] bus: 02 index 2 mmio: [0, 0]
[ 0.611476] bus: 02 index 3 mmio: [0, 0]
[ 0.611478] bus: 01 index 0 mmio: [0, 0]
[ 0.611480] bus: 01 index 1 mmio: [ff500000, ff5fffff]
[ 0.611483] bus: 01 index 2 mmio: [0, 0]
[ 0.611485] bus: 01 index 3 io port: [0, ffff]
[ 0.611487] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.611495] NET: Registered protocol family 2
[ 0.624053] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.624290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.624669] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.624877] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.624880] TCP reno registered
[ 0.632082] NET: Registered protocol family 1
[ 0.632195] checking if image is initramfs... it is
[ 1.361376] Freeing initrd memory: 8011k freed
[ 1.362537] audit: initializing netlink socket (disabled)
[ 1.362561] type=2000 audit(1234708455.360:1): initialized
[ 1.368834] highmem bounce pool size: 64 pages
[ 1.368840] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.371286] VFS: Disk quotas dquot_6.5.1
[ 1.371377] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.371483] msgmni has been set to 1761
[ 1.371610] io scheduler noop registered
[ 1.371613] io scheduler anticipatory registered
[ 1.371616] io scheduler deadline registered
[ 1.371628] io scheduler cfq registered (default)
[ 1.371726] pci 0000:06:00.0: Boot video device
[ 1.371856] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.371892] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.371923] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.371968] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.372059] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.372092] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.372125] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.372173] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.372214] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.372303] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.372335] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.372369] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.372409] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.372498] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.372536] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.372569] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.372610] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.372698] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.372731] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.372763] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.372804] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.373141] isapnp: Scanning for PnP cards...
[ 1.705199] isapnp: No Plug & Play device found
[ 1.739656] hpet_resources: 0xfed00000 is busy
[ 1.739729] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.739852] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.740672] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.742572] brd: module loaded
[ 1.742648] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.742783] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.745318] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.745325] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.745553] mice: PS/2 mouse device common for all mice
[ 1.745682] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.745704] rtc0: alarms up to one month, hpet irqs
[ 1.745841] EISA: Probing bus 0 at eisa.0
[ 1.745868] EISA: Detected 0 cards.
[ 1.745871] cpuidle: using governor ladder
[ 1.745874] cpuidle: using governor menu
[ 1.746410] TCP cubic registered
[ 1.746437] Using IPI No-Shortcut mode
[ 1.746614] registered taskstats version 1
[ 1.746758] Magic number: 13:614:586
[ 1.746787] tty ptyc4: hash matches
[ 1.746845] rtc_cmos 00:03: setting system clock to 2009-02-15 14:34:16 UTC (1234708456)
[ 1.746849] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.746851] EDD information not available.
[ 1.747040] Freeing unused kernel memory: 424k freed
[ 1.747079] Write protecting the kernel text: 2580k
[ 1.747107] Write protecting the kernel read-only data: 940k
[ 1.763308] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.894099] fuse init (API version 7.9)
[ 1.996926] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU1._OSC] (Node f7411198), AE_ALREADY_EXISTS
[ 1.996937] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 1.996986] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f7411180), AE_ALREADY_EXISTS
[ 1.996993] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[ 1.997117] processor ACPI0007:00: registered as cooling_device0
[ 1.997122] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.997431] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU2._OSC] (Node f7411270), AE_ALREADY_EXISTS
[ 1.997439] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 1.997484] ACPI Error (psparse-0530): Method parse/execution failed [\_PR_.CPU2._PDC] (Node f7411258), AE_ALREADY_EXISTS
[ 1.997491] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[ 1.997605] processor ACPI0007:01: registered as cooling_device1
[ 1.997610] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 2.319968] usbcore: registered new interface driver usbfs
[ 2.319992] usbcore: registered new interface driver hub
[ 2.320039] usbcore: registered new device driver usb
[ 2.330058] USB Universal Host Controller Interface driver v3.0
[ 2.330120] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.330130] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.330133] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.330189] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.330220] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
[ 2.330366] usb usb1: configuration #1 chosen from 1 choice
[ 2.330394] hub 1-0:1.0: USB hub found
[ 2.330401] hub 1-0:1.0: 2 ports detected
[ 2.332397] No dock devices found.
[ 2.347780] SCSI subsystem initialized
[ 2.432231] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.432242] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.432245] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.432272] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.432303] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
[ 2.432394] usb usb2: configuration #1 chosen from 1 choice
[ 2.432426] hub 2-0:1.0: USB hub found
[ 2.432436] hub 2-0:1.0: 2 ports detected
[ 2.439862] libata version 3.00 loaded.
[ 2.455368] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.536284] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.536295] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.536299] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.536327] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.536358] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 2.536451] usb usb3: configuration #1 chosen from 1 choice
[ 2.536484] hub 3-0:1.0: USB hub found
[ 2.536491] hub 3-0:1.0: 2 ports detected
[ 2.640260] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.640272] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.640276] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.640303] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.640335] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
[ 2.640428] usb usb4: configuration #1 chosen from 1 choice
[ 2.640456] hub 4-0:1.0: USB hub found
[ 2.640463] hub 4-0:1.0: 2 ports detected
[ 2.849075] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.849091] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.849095] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.849125] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.853021] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.853027] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.853035] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffafbc00
[ 2.960016] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 2.972012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.972148] usb usb5: configuration #1 chosen from 1 choice
[ 2.972178] hub 5-0:1.0: USB hub found
[ 2.972186] hub 5-0:1.0: 8 ports detected
[ 3.028038] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 3.180190] ata_piix 0000:00:1f.1: version 2.12
[ 3.180206] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.180245] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.180308] scsi0 : ata_piix
[ 3.180398] scsi1 : ata_piix
[ 3.181940] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.181943] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.292014] usb 5-7: new high speed USB device using ehci_hcd and address 2
[ 3.344330] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
[ 3.360268] ata1.00: configured for UDMA/33
[ 3.425407] usb 5-7: configuration #1 chosen from 1 choice
[ 3.425853] hub 5-7:1.0: USB hub found
[ 3.426083] hub 5-7:1.0: 4 ports detected
[ 3.530472] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
[ 3.530894] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 3.530899] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.684020] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.684074] scsi2 : ata_piix
[ 3.684359] scsi3 : ata_piix
[ 3.684411] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 23
[ 3.684414] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 23
[ 3.704341] usb 5-7.3: new high speed USB device using ehci_hcd and address 3
[ 3.802670] usb 5-7.3: configuration #1 chosen from 1 choice
[ 3.892262] ata3.00: ATA-7: ST3250820AS, 3.AAC, max UDMA/133
[ 3.892265] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.958900] ata3.00: configured for UDMA/133
[ 4.560285] ata4.00: unsupported device, disabling
[ 4.560287] ata4.00: disabled
[ 4.560384] scsi 2:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
[ 4.560481] sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.560490] sky2 0000:04:00.0: setting latency timer to 64
[ 4.560518] sky2 0000:04:00.0: v1.22 addr 0xff8fc000 irq 19 Yukon-2 EC rev 2
[ 4.560946] sky2 eth0: addr 00:18:f3:64:78:25
[ 4.560963] sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.560970] sky2 0000:03:00.0: setting latency timer to 64
[ 4.560986] sky2 0000:03:00.0: v1.22 addr 0xff7fc000 irq 16 Yukon-2 EC rev 2
[ 4.561395] sky2 eth1: addr 00:18:f3:64:53:6d
[ 4.561431] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 4.561438] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 4.561470] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 4.561527] scsi4 : pata_jmicron
[ 4.561704] scsi5 : pata_jmicron
[ 4.562546] ata5: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 18
[ 4.562549] ata6: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 18
[ 4.882855] ahci 0000:02:00.0: version 3.0
[ 4.882874] ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.896036] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 4.896040] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 4.896047] ahci 0000:02:00.0: setting latency timer to 64
[ 4.896168] scsi6 : ahci
[ 4.896536] scsi7 : ahci
[ 4.896610] ata7: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe100 irq 17
[ 4.896614] ata8: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe180 irq 17
[ 5.380020] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.517948] ata7.00: ATA-6: WD My Book, 01.01B01, max UDMA/133
[ 5.517951] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 1)
[ 5.690932] ata7.00: configured for UDMA/133
[ 6.024024] ata8: SATA link down (SStatus 0 SControl 300)
[ 6.040108] scsi 6:0:0:0: Direct-Access ATA WD My Book 01.0 PQ: 0 ANSI: 5
[ 6.040248] ohci1394 0000:01:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.089980] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff5ff800-ff5fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.100708] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.100749] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.100789] scsi 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.125563] Driver 'sd' needs updating - please use bus_type methods
[ 6.125674] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.125692] sd 2:0:0:0: [sda] Write Protect is off
[ 6.125695] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.125723] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.125796] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.125812] sd 2:0:0:0: [sda] Write Protect is off
[ 6.125815] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.125843] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.125847] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.139263] sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.146028] Uniform CD-ROM driver Revision: 3.20
[ 6.146113] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.151231] sda5 sda6 >
[ 6.158765] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.158840] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.158857] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.158860] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.158888] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.158947] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 6.158963] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.158966] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.158993] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.158997] sdb: sdb1
[ 6.533946] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 6.818865] PM: Starting manual resume from disk
[ 6.818868] PM: Resume from partition 8:5
[ 6.818870] PM: Checking hibernation image.
[ 6.819045] PM: Resume from disk failed.
[ 6.856258] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.856262] EXT3-fs: write access will be enabled during recovery.
[ 7.364269] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000df310b]
[ 16.901174] kjournald starting. Commit interval 5 seconds
[ 16.901184] EXT3-fs: recovery complete.
[ 16.917759] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.132351] udevd version 124 started
[ 21.649134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.689391] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.768639] EDAC MC: Ver: 2.1.0 Jan 29 2009
[ 21.937937] iTCO_vendor_support: vendor-support=0
[ 21.992696] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 22.012037] ACPI: Power Button (FF) [PWRF]
[ 22.012195] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 22.044023] ACPI: Power Button (CM) [PWRB]
[ 22.120517] EDAC i82975x: ECC disabled on both channels.
[ 22.164131] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 22.167260] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 22.167345] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.288286] Linux agpgart interface v0.103
[ 22.332002] intel_rng: FWH not detected
[ 22.513844] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 22.558835] [fglrx] Maximum main memory to use for locked dma buffers: 926 MBytes.
[ 22.559289] [fglrx] vendor: 1002 device: 71ce count: 1
[ 22.560380] [fglrx] ioport: bar 4, base 0xc800, size: 0x100
[ 22.560395] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.560401] pci 0000:06:00.0: setting latency timer to 64
[ 22.561958] [fglrx] PAT is enabled successfully!
[ 22.562029] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 22.647253] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 22.979788] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 22.979808] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.138449] phy0: Selected rate control algorithm 'pid'
[ 23.321244] phy0: hwaddr 00:15:af:09:ae:b5, RTL8187vB (default) V1 + rtl8225z2
[ 23.321270] usbcore: registered new interface driver rtl8187
[ 23.488736] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 24.061722] lp: driver loaded but no devices found
[ 24.241871] Adding 2634620k swap on /dev/sda5. Priority:-1 extents:1 across:2634620k
[ 24.788095] EXT3 FS on sda1, internal journal
[ 69.781528] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[ 69.781539] ReiserFS: sda6: using ordered data mode
[ 69.788721] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 69.788930] ReiserFS: sda6: checking transaction log (sda6)
[ 69.847531] ReiserFS: sda6: Using r5 hash to sort names
[ 70.019998] type=1505 audit(1234708525.084:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=5082
[ 70.190201] type=1505 audit(1234708525.256:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=5087
[ 70.190410] type=1505 audit(1234708525.256:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=5087
[ 70.278744] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 70.701467] ACPI: WMI: Mapper loaded
[ 71.422124] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 71.577706] NET: Registered protocol family 10
[ 71.578548] lo: Disabled Privacy Extensions
[ 71.648998] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 71.649003] apm: disabled - APM is not SMP safe.
[ 71.868022] ppdev: user-space parallel port driver
[ 74.193593] Bluetooth: Core ver 2.13
[ 74.194040] NET: Registered protocol family 31
[ 74.194045] Bluetooth: HCI device and connection manager initialized
[ 74.194049] Bluetooth: HCI socket layer initialized
[ 74.212792] Bluetooth: L2CAP ver 2.11
[ 74.212798] Bluetooth: L2CAP socket layer initialized
[ 74.224734] Bluetooth: SCO (Voice Link) ver 0.6
[ 74.224742] Bluetooth: SCO socket layer initialized
[ 74.245876] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 74.245882] Bluetooth: BNEP filters: protocol multicast
[ 74.281244] Bridge firewalling registered
[ 74.343715] Bluetooth: RFCOMM socket layer initialized
[ 74.343918] Bluetooth: RFCOMM TTY layer initialized
[ 74.343923] Bluetooth: RFCOMM ver 1.10
[ 76.437631] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 76.437640] [fglrx] Reserved FB block: Unshared offset:1000000, size:5000
[ 76.437643] [fglrx] Reserved FB block: Unshared offset:ffbb000, size:44000
[ 76.437649] [fglrx] Reserved FB block: Unshared offset:ffff000, size:1000
[ 78.440239] sky2 eth1: enabling interface
[ 78.442482] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 78.443487] sky2 eth0: enabling interface
[ 78.445715] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 87.065623] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 87.140943] NET: Registered protocol family 17
[ 187.941345] wlan0: authenticate with AP 00:1d:19:15:a8:e8
[ 187.943068] wlan0: authenticated
[ 187.943074] wlan0: associate with AP 00:1d:19:15:a8:e8
[ 187.946320] wlan0: RX AssocResp from 00:1d:19:15:a8:e8 (capab=0x451 status=0 aid=1)
[ 187.946325] wlan0: associated
[ 187.946821] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 189.037945] padlock: VIA PadLock not detected.
[ 198.540021] wlan0: no IPv6 routers present
[13384.825211] ata7.00: exception Emask 0x10 SAct 0x1 SErr 0x780100 action 0x6
[13384.825219] ata7.00: irq_stat 0x08000000
[13384.825222] ata7: SError: { UnrecovData 10B8B Dispar BadCRC Handshk }
[13384.825229] ata7.00: cmd 60/f8:00:27:0a:92/00:00:03:00:00/40 tag 0 ncq 126976 in
[13384.825231] res 40/00:04:27:0a:92/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
[13384.825235] ata7.00: status: { DRDY }
[13384.825241] ata7: hard resetting link
[13385.144031] ata7: SATA link down (SStatus 0 SControl 300)
[13390.144017] ata7: hard resetting link
[13390.468033] ata7: SATA link down (SStatus 0 SControl 300)
[13395.468017] ata7: hard resetting link
[13395.788033] ata7: SATA link down (SStatus 0 SControl 300)
[13395.788045] ata7.00: disabled
[13395.788068] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[13395.788074] sd 6:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
[13395.788080] Descriptor sense data with sense descriptors (in hex):
[13395.788083] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[13395.788096] 03 92 0a 27
[13395.788102] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information
[13395.788108] end_request: I/O error, dev sdb, sector 59902503
[13395.788114] Buffer I/O error on device sdb1, logical block 7487805
[13395.788123] Buffer I/O error on device sdb1, logical block 7487806
[13395.788127] Buffer I/O error on device sdb1, logical block 7487807
[13395.788132] Buffer I/O error on device sdb1, logical block 7487808
[13395.788136] Buffer I/O error on device sdb1, logical block 7487809
[13395.788140] Buffer I/O error on device sdb1, logical block 7487810
[13395.788144] Buffer I/O error on device sdb1, logical block 7487811
[13395.788148] Buffer I/O error on device sdb1, logical block 7487812
[13395.788152] Buffer I/O error on device sdb1, logical block 7487813
[13395.788156] Buffer I/O error on device sdb1, logical block 7487814
[13395.788194] ata7: EH complete
[13395.788204] ata7.00: detaching (SCSI 6:0:0:0)
[13395.830704] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[13395.830769] sd 6:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[13395.830778] sd 6:0:0:0: [sdb] Stopping disk
[13395.831585] sd 6:0:0:0: [sdb] START_STOP FAILED
[13395.831591] sd 6:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK