PDA

View Full Version : [all variants] Hal Running Wild with CD/DVD drive



fwallace99
January 20th, 2009, 09:29 AM
Hello all, maybe someone can help me with my ongoing problems with My System. HAL is running wild, taking up WAY too much CPU (easily 60%).

My system:

uname -a
Linux Prytania 2.6.24-23-generic #1 SMP Thu Nov 27 18:44:42 UTC 2008 i686 GNU/Linux

[Hardy Heron 8.04]

2 GB RAM, Toshiba Satellite A135-S2276.

I WAS able to play commercial DVDs on this, with 7.04 Feisty. Now the DVDs play slow, like junk, many motion artifacts. CD/DVD drive becomes unuseable and K3B refuses to start, or hangs for a long time, says drive is unavailable, I get a lot of messages in dmesg about well, stuff like this:

ide: failed opcode was: unknown
[ 824.223338] hdc: error code: 0x70 sense_key: 0x05 asc: 0x6f ascq: 0x03
[ 824.223342] end_request: I/O error, dev hdc, sector 128404
[ 824.227531] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 824.227539] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 824.227542] ide: failed opcode was: unknown


I get the usual messages from dbus complaining about not mounting the audio disc (this is when the computer's CD/DVD drive is empty).

The computer slows down to a crawl, randomly, top reveals that hal-addon-storage daemon is taking up lots of CPU time, around 60% or more.

Killing that daemon certainly makes my computer run a LOT faster. But I still can't play DVDs, at all, even with manual mounting. Leaving the daemon running leaves me with a very sloooowwww DVD drive, when under FEISTY it ran like a top (video playback was GREAT, better than a DVD player).

Here's my hardware info:


floyd@Prytania:~$ sudo lshw -short
[sudo] password for floyd:
H/W path Device Class Description
================================================== ===
system Satellite A135
/0 bus IAYAA
/0/0 memory 108KiB BIOS
/0/4 processor Genuine Intel(R) CPU T2060
/0/4/5 memory 16KiB L1 cache
/0/4/6 memory 1MiB L2 cache
/0/4/0.1 processor Logical CPU
/0/4/0.2 processor Logical CPU
/0/12 memory 2GiB System Memory
/0/12/0 memory 1GiB DIMM DRAM Synchronous
/0/12/1 memory 1GiB DIMM DRAM Synchronous
/0/1 processor
/0/1/0.1 processor Logical CPU
/0/1/0.2 processor Logical CPU
/0/100 bridge ATI Technologies Inc
/0/100/1 bridge RS480 PCI Bridge
/0/100/1/5 display RC410 [Radeon Xpress 200M]
/0/100/6 bridge RS480 PCI Bridge
/0/100/6/0 wifi0 network AR242x 802.11abg Wireless PCI Express
/0/100/12 scsi0 storage IXP SB400 Serial ATA Controller
/0/100/12/0.0.0 /dev/sda disk 80GB TOSHIBA MK8037GS
/0/100/12/0.0.0/1 /dev/sda1 volume 2047MiB Linux swap volume
/0/100/12/0.0.0/2 /dev/sda2 volume 72GiB EXT3 volume
/0/100/13 bus IXP SB400 USB Host Controller
/0/100/13.1 bus IXP SB400 USB Host Controller
/0/100/13.2 bus IXP SB400 USB2 Host Controller
/0/100/14 bus IXP SB400 SMBus Controller
/0/100/14.1 storage IXP SB400 IDE Controller
/0/100/14.1/1 ide1 bus IDE Channel 1
/0/100/14.1/1/0 /dev/hdc disk MATSHITADVD-RAM UJ-850S
/0/100/14.2 multimedia IXP SB4x0 High Definition Audio Contro
/0/100/14.3 bridge IXP SB400 PCI-ISA Bridge
/0/100/14.4 bridge IXP SB400 PCI-PCI Bridge
/0/100/14.4/4 bridge CB1410 Cardbus Controller
/0/100/14.4/6 eth0 network RTL-8139/8139C/8139C+
/1 power TOSHIBA



What's going on?

Obviously HAL is running wild. Ubuntu team has said basically, go use kernel 2.6.27 (which I don't know how to do anyway, and I don't want to compile a kernel -- a three day affair min to compile, test, fix, test, fix, compile more, test again, maybe more, just to play DVDs).

ANY solutions would be most appreciated.

I'm looking to both tame HAL, so it does not go wild, and play DVDs at the speed FEISTY played them (i.e. without the annoying motion artifacts all the time).